Assa Abloy RIXSON SMOK-CHEK V 0101 Bedienungsanleitung

SMOK-CHEK®V

A Fire/Life Safety Holder Product

Model 0101

Push Side Mounting

Independent Closing Means

*85° thru Maximum Degree of Swing

Single Point Hold Open

Not for Use on Doors that will be

Manually Closed on a Daily Basis

General Information:

Non Handed

Door Hanging Means:

• Standard 4”, 4-1/2”, or 5” Butt Hinges

• 3/4” Offset Pivot

• For other means, contact factory

2” Minimum head frame

For frame face sizes less than 2”, contact factory

Maximum reveal 3-1/2”

For reveals from 3-1/2 to 7”, use arm 550789

*For hold-open from 105° - 180°, use arm 550789

Door Closing Device by others

ISFM0101

Left Hand Shown

Screw

01844016

02344010-602

01030

06344808

02301420-602

02344010-602

02344012-602

Description

1/4-20 x 1 FLH Allen (1)

Pan HD 1/4-20 x 5/8 (4)

Washer (1)

FLHD 1/4-20 x 1/2 (1)

#14x1-1/4 PHPWS (2)

1/4-20x5/8 PHPMS (6)

1/4-20x3/4 PNHDSMS (2)

Holder Cover

550106-*(non-detectored)

Magnet

930105 120VAC

930106 24VAC/DC

Holder Assembly (includes magnet)

550100 120VAC

550101 24VAC/DC

www.rixson.com

Door Pivot Bracket

565118T689

Push Side Arm

550136K*

Reinforcing Plates

By Others

12 Ga. Min.

Reinforcing Plates

By Others

12 Ga. Min. 3-1/2 (89)

Reveal

Max.

4-1/16

(103)

For Frame Less Than

Shown On Chart

Consult Factory

1/2 (12.7)

5/8 (16)

2-1/2 (63.5)

2-5/8 (67)

1-1/2

(38)

Stop Dim.

1-1/4

(31.8)

LButt Hinge or Pivot

9-1/8

(232)

7/8

(22)

1/4-20 Machine Screw

(4 Places)

10-3/4

(273)

1-1/8

(80.6)

8-3/16

(208)

Optional Knock Out

“In Out” Wiring

1-1/4

(31.8)

10-1/4

(260)

12-1/2

(318)

7/8 (22)

Dia.

Hole

7/8

(22) 3/4

(19)

1-11/16

(43) B

Stop Dim

1/2 (12.7)

5/8 (16)

1-3/4 (44.5)

1-7/8 (47.7)

1-3/16

(30)

1-1/2

14-20 Machine Screw

or #14 Wood Screws

(2 Places)

Mounting Hole Locations

• Right hand shown

• Door hanging means: 4”, 4-1/2”, 5” Butts or 3/4” Offset Pivots

• All dimensions given in inches (mm)

Page 2

ISFM0101

Solid Line Represents Double Egress Frame

Dotted Line Represents Standard Double Rabbeted Frame

www.rixson.com

Push Side Mounting

Page 3

ISFM0101

1. Mounting Holder

A. Layout & prepare screw holes.

B. Remove appropriate knock out in Smok-Chek &

attach 3/8” (9.5) conduit fitting. (Fig. 1a)

C. Push conduit back into frame.

D. Attach holder with (6) 1/4-20 x 5/8 pan HD screws –

tighten securely.

E. Attach arm to holder with (1) 1/4-20 x 1 FHD allen

screw. (Fig. 1b)

CAUTION: SQUARE ON ARM MUST BE INSERTED AND TIGHTENED INTO HOLDER VERY

SECURELY BEFORE ARM IS ATTACHED TO SPINDLE OF CLOSER.

Power Supply

Magnet

Hot

Switch

Neutral

BEFORE BEGINNING WIRING, INSTALLER MUST BE GROUNDED!

3. Electrical Wiring

Field Wires should be 18ga OR as required by local code

A. Connect switch – in series – with HOT lead of

electromagnet.

Note:

120vAC draws .018 amp

24vAC/DC draws .091 amp

Fig. 1b

Fig 1a

www.rixson.com

Push Side Mounting

2. Mounting Door Pivot Bracket

A. Mount door bracket to door and fasten

with two 1/4-20x1/2” RDH or #14x1-1/4

Pan HD screws.

B. Slide bracket arm into holder arm.

C. Attach arm to bracket spindle with washer

and 1/4-28x1/2” FLH screws. (Fig. 2a)

D. Position arm as per suggested arm

settings listed in chart. (Fig. 2b)

E. Assemble holder and bracket arms

together with the 1/4-20x5/16” RDH

screws.

12 3481012 14 16 1

Fig 2a

Fig 2b

Arm Setting No. 18

Door Hanging

Means

4” Wide Butts

4-1/2” Wide Butts

5” Wide Butts

Swing Clear

3/4” Offset Pivot

Arm Settings

85°/135° 130°/180°

17 16

18 16

19 16

17 -

18 16

Rixson® and Smok-Chek® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc., is prohibited.

4. Making Adjustments to the Holder

A. Closer spring force should be as low as possible.

(Closer should arrive at lowest setting).

B. Turn OFF Power (using ON/OFF switch).

C. To set Hold Open:

1. Door should be in CLOSED position.

2. Raise or lower cam until the word “Push” is dis-

played from the UNDERSIDE of the unit (Fig 4a).

3. Open door to desired Hold Open position.

4. Raise or lower cam and ROTATE until pocket of

cam is in position next to Roller A shown in Fig 4b

5. Release cam to re-engage teeth.

6. Turn ON power (using ON/OFF switch).

7. OPEN DOOR. Door should stay in Hold Open

position–if not, repeat Steps 3 and 4.

8. Pull door OUT of Hold Open–door should close

freely.

9. OPEN DOOR. If releasing force needs to be

increased, turn adjusting nut IN. If lesser holding

force is desired, turn nut OUT.

10. Attach holder cover.

Trouble-Shooting Tips:

1. Turn ON power.

2. Can door swing far enough to engage hold open? Minimum opening is 85°.

3. Make sure closer is at lowest spring setting.

4. Put piece of metal against the magnet to make sure it is receiving current.

5. If not, double check wiring instructions.

6. If so, with door in closed position look up at holder mechanism. Word PUSH should be visible, if

not, adjust cam.

7. Turn adjusting nut.

8. Check arm indexing.

Page 4

ISFM0101

Fig 4a

Fig 4b

Hold Open

Adjust Nut

www.rixson.com

Push Side Mounting

ASSA ABLOY

RIXSON®

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy 1370 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YM Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5200 Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON 185 Quick Spotter Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 5200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9300BCH Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT Powerglide 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Adams Rite 3700 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 3828 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9510 Series Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 1600H Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED4600 A Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 1105 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1130 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Bedienungsanleitung

Assa Abloy

Assa Abloy RD150-3 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood 5831 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SW100 Bedienungsanleitung

Assa Abloy

Assa Abloy Adams Rite EX76W Betriebsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung