Bristan CFC33 Bedienungsanleitung

SW FR WH FRAME

CFC33

Please keep these instructions for future reference and request of replacement parts

INSTALLATION INSTRUCTIONS

Front Access Wall Hung Frame with Concealed Cistern

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

DESCRIPTION

jkmn

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

Control panel

Tools required:

• Set of wrenches from 8 to 19 mm

• Hack saw

• Electric drill + bit dia 10 mm

• Spirit level

• Pencil + ruler

• Tape measure

• Hammer

• Screw driver

ACCESSORIES

Drain kit

Float valve

Stopcock with ﬁbre joint

Mechanism

PSE template

Supply bend

Supply bend cap

Toilet pipe cap

Supply sleeve

Bowl attaching kit

Flexible sheaths (x 2)

Pipe attaching collar

Toilet bowl attaching rods (x 2)

Setscrew (x 2)

Adjustable foot (x 2)

Screw plug (x 8)

Plug (x 8)

Toilet bowl stud attaching tab (x 2)

Attaching bracket (x 2)

White single volume plate Ref. 31 1830-10

Chrome double volume plate Ref. 31 1880-10

White double volume plate Ref. 31 1800-10

Chrome double volume plate Ref. 31 1850-10

Bent drain kit Ref. 92 4000-07

Straight drain kit Ref. 92 4010-07

Bent pipe

Plate

Chassis

Screws

(4)

Straight

pipe

Drain

sleeve

Drain

sleeve

Advice:

• Keep the product package during

installation: there is a cutting template

on the back

• Keep these instructions safety for any

maintenance operations.

 Read bowl and toilet seat instructions

before intalling the cistern frame.

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

INSTALLATION TYPES

EFFECTIVE DIMENSIONS

➊ Wall ﬁxing

I - Frame depth =

from 142 to 245 mm straight outlet

from 147 to 245 mm bent outlet

II - Cladding thickness = from 16 to 100 mm

III - Height = Adjustable from 1080 to 1280 mm

IV - Height of toilet bowl = 400 mm (ﬁnished ﬂoor level)

V - Maximum thickness of ﬁnished ﬂooring = 185 mm

III

VIV

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

I - ASSEMBLING THE TOILET BOWL ATTACHING RODS AND WALL FIXING

II - ADJUSTMENT OF THE FRAME HEIGHT

➊ Measure the center distance of the toilet bowl (A)

➋ Insert the rods (I) into the holes of the frame,

corresponding to the center distance

➌ Position the frame in place

➍ Secure the attaching tabs (q) to the rods (l),

position the assembly against the wall and lock

with the nuts.

➎ Position the wall mounting bracket (r) against

the wall and attach it with the nuts, ﬁrst

checking that the frame is vertically level

➏ Use a hacksaw to cut the threaded rods of the

bracket protruding from the frame

➊ Position the frame in its ﬁnal location

➋ Undo the 2 setscrews (m)

➌ Adjust the height of the feet so that the top of the toilet bowl

is at a height of 400 mm from the ﬁnished ﬂoor level.

➍ Check that the frame is level (vertically and horizontally) and

tighten the setscrews

 If the frame is being attached to an unﬁnished ﬂoor surface,

the maximum thickness of the ﬁnished ﬂoor surface shall

not be more than 185 mm.

➊ ➋

➍

➎➏

m➋

➍

➌

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

III - PREPARING FOR ATTACHMENT

IV - CONNECTING THE DRAIN OUTLET

➊ Mark the drilling points (6 for wall and 2 for ﬂoor)

➋ Remove the frame and drill to a depth of 70 mm at the least, using

an 10 mm diameter drill bit

➌ Position the screw plugs in the holes

➍ Move the frame back in place and connect the drain pipe

➊ Attach the collar (k)

➋ Position the drain outlet pipe

➌ Tighten the collar (k)

 Before gluing the drain outlet pipe to the main

drain pipe, ensure that the frame is correctly

positioned.

If the drainpipe is not opposite the outlet pipe,

the connection can be made using PVC bends and

couplings.

➊

➋➌

x 6

x 2

Bent outlet

Straight outlet

➊

➋

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

V - ATTACHING THE FRAME

VI - WATER SUPPLY CONNECTION

➊ Attach the frame deﬁnitively

➊ Remove the frame by

lifting the two locks

➋ Connect your pipe to the

shut-off valve (b) either

using the dual cone

supplied or directly with

the nuts provided on the

water inlet (in this case,

ensure tightness using a

ﬁbre washer)

➌ Insert the water supply

tube in the cistern

➍ Connect the shut-of f

valve (b) to the ﬂoat valve

(a) (ensure tightness by

a ﬁbre washer).

Frame

Locks

Frame

➊

➋

➌

➍

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

VII - TESTING WITH WATER

➊

➋

➎

➐

➊ Insert the supply sleeve (h) and

the drain sleeve on the toilet

bowl

➋ Position the toilet bowl on the

frame

➌ Turn on the water using the shut-

off valve (b) and wait until the

toilet bowl ﬁlls

➍ Manually operate the mechanism

➎ Check the tightness of the supply

and drain connections

➏ Close the shut-off valve and drain the

cistern

➐ Remove the toilet bowl

➌

➍

➏

➎

➏

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

VIII - PREPARING THE CLADDING

IX - CLADDING

➊ Fit the frame

➋ Attach the PSE template (d) to the frame using

the two grey screws provided in the control

panel box

➌ Fit the caps (f) and (g) on the supply bend (e) and

on the drain pipe as well as the ﬂexible sheaths

(i) over the attaching rods of the toilet bowl (l)

 The thickness of the covering must be between 16 and 100mm,

the covering must be ﬁxed to the support structure.

Cladding can be of various materials (brick, plaster blocks, plaster board, water repellent

wood panels etc).

For the preliminary punching out of the various holes (command plate, evacuation and

ﬁlling of the bowl, and bowl-ﬁxing rods) a measuring guage can be found on the back

of the packing.

Once the covering is ﬁnished, take off the PSE guage (d), keep the screws for ﬁxing on

the command plaque, take off the shutters (f) and (g).

Frame

➊

➋

➌

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

X - TOILET BOWL CONNECTION

➊ Using a rule placed as shown in the above drawing,

draw a mark on the toilet bowl side, on the two

sleeves.

➋ Remove the sleeves from the toilet bowl and ﬁt them

to the frame. Using a rule placed as shown in the

drawing above, make a mark on the wall side, on

the two sleeves

➌ For each of the sleeves, measure the dimension

(L) between the two marks.

➍ Transfer this dimension (L) by

increasing by 3 mm at the end (frame

side) the size obtained on each

sleeve. For instance, if L = 50 mm,

shorten the sleeve by 53 mm.

➎ Cut the sleeves using a hack saw.

 Read bowl and toilet seat instructions before intalling

the cistern frame.

For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan Star FH STRD01 C Bedienungsanleitung

Bristan

Bristan DSC SHC3DIV C Verdrahtungsschema

Bristan

Bristan BRG 3HBAS C Bedienungsanleitung

Bristan

Bristan RO2 SHXAR C Montageanleitung

Bristan

Bristan IRBS1-CP Montageanleitung

Bristan

Bristan Jute JU BSM C Bedienungsanleitung

Bristan

Bristan GLL RAPSNK4 C Montageanleitung

Bristan

Bristan W BTH PU1 C/G Bedienungsanleitung

Bristan

Bristan Jute JU PBSM C Bedienungsanleitung

Bristan

Bristan HOU SHC3DIV C Verdrahtungsschema

Bristan

Bristan Artisan AR SNK C Bedienungsanleitung

Bristan

Bristan Blade BL BAS C Bedienungsanleitung

Bristan

Bristan VAX DSM C Verdrahtungsschema

Bristan

Bristan Java J BASNW C Bedienungsanleitung

Bristan

Bristan Rio Bedienungsanleitung

Bristan

Bristan N2 SHCDIV C (D7) Verdrahtungsschema

Bristan

Bristan PISA PS2-BSM-C Bedienungsanleitung

Bristan

Bristan WMNT11 C Montageanleitung

Bristan

Bristan CR SHXDIVFF C Verdrahtungsschema

Bristan

Bristan Pivot Series Bedienungsanleitung

Bristan

Bristan PM2 SHCDIV C Verdrahtungsschema

Bristan

Bristan Prism Bedienungsanleitung

Bristan

Bristan Java J BID C Bedienungsanleitung

Bristan

Bristan TFS 1 C Verdrahtungsschema

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung