Bristan GLL RAPSNK4 C Montageanleitung

Installation Instructions

and User Guide

Gallery Rapid Boiling

4-in-1 Sink Mixer Chrome

Models Covered:

GLL RAPSNK4 C

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave

them with the user.

Contents

• Important Safety Information 3-4

• Speciﬁcation 5

• Installation Requirements 6-7

• Installation 8-9

• Preparation for Use 9

• Operation 10-11

• General Cleaning 11

• Maintenance 12-13

• Troubleshooting 14

• Notes 15

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Contents

Thank you for choosing Bristan, the UK’s leading tap and shower expert.

We have designed this product to be easy to install and use. It has also

been assessed to all of the relevant British Standards, and conforms to

CE Regulations.

These instructions are for your guidance to a safe and successful installation,

so please read them thoroughly and retain for future reference.

• Please read these instructions thoroughly

and retain for future use.

• All products manufactured and supplied by Bristan

are safe provided they are installed, used correctly

and receive regular maintenance in accordance

with these instructions.

• If you are in any doubt about your ability to install

this product safely you must employ the services

of an experienced qualiﬁed plumber/electrician.

• Warning: The Boiling Water Tank is intended

for domestic use only. Do not install the unit

outdoors or where it might be subjected to

damp or freezing conditions.

• Check the power rating of the Boiling Water Tank

is suitable for the power rating of the electrical

circuit that it is being installed on

• Check that no parts are missing or damaged on

the Boiling Water Tank or Tap as per the

instructions. If parts are missing or damaged,

do not install and contact Customer Services

• Do not install this Boiling Water Tank in a

room/environment without adequate ventilation

or an extractor ﬁtted. This is required to prevent

condensation forming within the unit.

• This Boiling Water Tank is only intended for use

with the Boiling Water Tap supplied. Using this tank

with any other tap will invalidate the guarantee.

• Do not attempt to open or modify the Boiling

Water Tank as this will invalidate the guarantee.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Important Safety Information

• The ﬁlter supplied has to be replaced every six

months for protection of your Boiling Water Tank.

Failure to do so will invalidate your guarantee.

• To protect against electric shock, do not place

the cord, plugs or Boiling Water Tank near or in

water/other liquids. Do not operate the appliance

or touch the plug with wet hands.

• The power lead is an integral part of the Boiling

Water Tank. If the power lead is damaged, stop

using immediately and contact Customer Services.

Do not attempt to ﬁx as this can result in

serious injury or death.

• Do not remove the earthing terminal, reconstruct

the plug, or disassemble the main box or any

part for the power.

• The appliance must be installed vertically with

the inlet and outlet connections at the top of the

unit.

• Warning: This appliance is not intended for

use by children or persons with reduced

physical, sensory or mental capabilities or

lack of experience and knowledge; unless

they have been given supervision or

instruction concerning use of appliance in

a safe way, and understand the hazards

involved.

• Children should not play with the appliance.

Cleaning and maintenance should not be

undertaken by children without supervision.

• Turn o all controls before unplugging. Unplug

the Boiling Water Tank by grasping the plug, not

the cable.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Important Safety Information

Heavy

Commercial

5°C

20°C

Light

Commercial

Maximum Static Pressure: 3.0 Bar

Inlet Water Temperatures

Min: 1.5 Bar Max: 3.0 Bar

Working Pressures

Suitable for high pressure

systems only

4 Temperature Settings

Cold Water Supply

Flexible Tails

Min: 5°C Max: 20°C

Min: 80°C Max: 98°C

Tools You’ll Need

1/2” BSP

Recommended Usage

Healthcare

Pack Contents

Flat-head Screwdriver Cross-head ScrewdriverPencil Drill PliersPipe & Wire Detector

Domestic Electrical Requirements

Supply Requirements

Inlet Connections Tank Capacity

IMPORTANT

Speciﬁcations

Prior to Installation

All products manufactured and supplied by Bristan are safe to use

provided they are installed, operated correctly and receive regular

maintenance in accordance with these instructions.

This product has been designed to comply with the Water Supply

(Water Fittings) Regulations 1999 and current bylaws.

For full Installation Requirements & Notes (IRN) please visit

wras.co.uk/directory.

Remove all packaging and check the contents for damage before

starting any installation.

Fitting isolation valves (not supplied) to the inlet feeds is required

as close as is practical to the inlet connections for ease of

maintenance.

Before installing this product the water supply must be

thoroughly ﬂushed in order to remove any swarf, solder etc.

Ensure an electric socket is near the place of installation; if a

socket needs to be installed, please request the services of a

qualiﬁed electrician.

Adjustable Spanner

220-240V AC

2.0kW

50/60 Hz~

IPX3 Protection

The Pressure Reducing

Valve (PRV) supplied

is pre-set at 3bar and is

required on the Domestic

Cold Supply.

x1*

Pipe Cutter

52°C

65°C

Hot Water Supply

Tap Only

Min: 52°C Max: 65°C

Conforms to

CE Regulations

Not Required

Slight

bend

90°

angle

Kinks Twists

* Note: PRV may not look

exactly as pictured

1.0

5.0

4.0

3.02.0

Pressure

BAR

1.0

5.0

4.0

3.02.0

Pressure

BAR

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 5

Speciﬁcation

25mm

Place the tank in a suitable, well ventilated

location that will not fall below 0°C.

Ensure that the tank is installed vertically on

a level surface with adequate space around the

tank. Keep away from direct sunlight.

We recommend installing a Drain Pan and waste

(not supplied) to protect against water damage

and for ease of emptying the tank.

Also ensure that the

Filter is in an easily

accessible place for

replacement purposes.

Ensure that the

tap tails and ﬁlter

connections can reach

the connection points.

Positioning the Boiling Water Tank

150mm

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

Connection Diagram

IMPORTANT

The PRV, ﬁlter and

isolation valves, are

required for optimum

performance and

maintenance of your

product.

Filter Out

Filter In

Boiling Water

Supply

4-in-1 Boiling

Water Tank

Hot Supply

Cold Supply

Pressure

Reducing Valve

Household Pipework

Isolation Valves

(not supplied)

T-Piece

(not supplied)

Electric

Connection

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 7

Installation Requirements

1 2

Position the

Boiling Water

Tank in a suitable

location. (See

Installation

Requirements).

Feed the pipes

through the sink

hole and place

the tap body.

Secure the tap

in place using

the ﬁxing kit.

Fix the ﬁlter

mounting bracket

to the wall/surface.

Ensure easy

access, and that

the connecting

pipes from the

tap and

tank can reach.

Ensure the

ﬁlter is easily

accessible

for ﬁlter

replacements.

IMPORTANT

Do not tamper

with the PRV as

this will aect the

performance of

your tap.

IMPORTANT

A single check

valve on the cold

supply is required

as per IRN R150.

Plumb the

domestic

pipework to

the location,

splitting o

the cold

supply.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation

Ensure the

tap tails

and cables

can reach

connection

points.

Connect the

Electrical cable.

Push on the silicon

hose, trimming o

any excess. Slide

down the spring to

secure in place.

Place a jug

under the spout

and expel all air

from the system.

Check connections

for any leaks.

Attach the

Filter Sump to the

Mounting Bracket.

Connect the tap

connections to the

domestic water supplies.

Hot

Cold

IMPORTANT

Ensure the plastic

shroud covers

the silicon hose

connector. This is

a safety feature to

prevent accidental

scalding.

Filter In

Press

Switch on the Boiling Water Tank.

Run o at least 20 litres of water from

the Boiling Water handle, resting the

system every 30 seconds.

Your Tap is now Ready for Use.

Connect the

Filter connections

to the Boiling

Water Tank.

Installation

Preparation for Use

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 9

Cut the

ﬁlter pipe

tube to size.

The water will be at the set

temperature once the Temperature

Setting Bar stays lit.

Tap the Touch Sensitive Ring to select

your desired Temperature Setting.

See the above table for

Temperature Settings.

Start-Up/Change Temperature

Plug in the Power Supply.

Flip the power switch to

turn on the tank.

The Temperature Setting Bar will ﬂash

whilst the water is heating up.

Touch Sensitive Ring:

Touch and Tap to select through

4 dierent temperature settings.

Temperature

Setting Bars

No Bars Lit Temperature Range Nominal Temperature

1 75-80°C80°C

2 81-86°C86°C

387-92°C92°C

4 93-98°C98°C

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Operation

Andere Handbücher für GLL RAPSNK4 C

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan Colonial K BRSNK C Bedienungsanleitung

Bristan

Bristan Artisan AR2 SHXMTFF2 C Montageanleitung

Bristan

Bristan Zing Safe Touch Bar Mixer Multi Mode Kit Verdrahtungsschema

Bristan

Bristan BRG 3HBAS C Bedienungsanleitung

Bristan

Bristan CLUB VAC PBSM C MT Bedienungsanleitung

Bristan

Bristan PM2 SHCDIV C Verdrahtungsschema

Bristan

Bristan VAL2 BIB C 6 CD Verdrahtungsschema

Bristan

Bristan JU BAS C Bedienungsanleitung

Bristan

Bristan NIVA NVA BSM C Verdrahtungsschema

Bristan

Bristan CRZ2 SHXDIVCTFF C Verdrahtungsschema

Bristan

Bristan IRBS1-CP Montageanleitung

Bristan

Bristan W BASIN08 C Bedienungsanleitung

Bristan

Bristan W BATH05 C Verdrahtungsschema

Bristan

Bristan SAI 1/2 C Montageanleitung

Bristan

Bristan CRZ SHXDIVCTFF BLK (D1) Verdrahtungsschema

Bristan

Bristan SQR KIT01 BLK D2 Verdrahtungsschema

Bristan

Bristan DSC 3HBAS C Montageanleitung

Bristan

Bristan PM2 SHCDIV BLK (D2) Verdrahtungsschema

Bristan

Bristan Buzz Verdrahtungsschema

Bristan

Bristan GLE385 W Montageanleitung

Bristan

Bristan Blade BL BAS C Bedienungsanleitung

Bristan

Bristan W BTH12 C Bedienungsanleitung

Bristan

Bristan W SNK6 C Bedienungsanleitung

Bristan

Bristan GLL FLEXSNK C (D1) Verdrahtungsschema

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung