Bristan IRBS1-CP Montageanleitung

Models Covered:

IRBS1-CP, IRBS2-CP &

IRWS1-CP

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave

them with the user.

Installation Instructions

and User Guide

Infrared Automatic Basin

Spouts

Contents

• Important Safety Information 3

• Speciﬁcation 4

• Product Features 5

• Dimensions (mm) 6-7

• Installation Requirements 8

• Installation 9-12

• Installation - Electrical Connections 13

• Installation - Water Connections 14-15

• Operation 15

• Maintenance 16

• Troubleshooting 17-18

• Notes 19

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Contents

Thank you for choosing Bristan, the UK’s leading showers and taps expert.

Your Bristan basin spout has a non-touch control which uses infrared sensing

technology to detect human presence. Once detected, the spout instantly

dispenses water and automatically stops once the user moves their hands

away to eliminate unnecessary water wastage, whilst creating a more hygienic

washroom solution.

All products manufactured and supplied by Bristan are safe and comply to

legislative requirements. Providing they are installed correctly and receive

regular maintenance in accordance with these instructions your user experience

will not be aected.

For a safe and successful installation these instructions should be used as

guidance, thereafter they should be left with the user.

• Before starting any installation

please consider the following: before

drilling into walls, check that there are

no hidden electrical wires, cables or

water supply pipes. This can be checked

with the aid of an electronic detector.

• If power tools are used do not

forget to:

- Wear eye protection

- Unplug equipment after use

• Fitting isolating valves to the

inlet feeds is required for ease of

maintenance.

• Warning: Before installing

the new spout it is essential

that you thoroughly

ﬂush through the pipework

in order to remove any remaining swarf,

solder, etc. Failure to carry out this

procedure could cause problems or

damage to the workings of the spout.

• This product must not be modiﬁed

in any way as this will invalidate the

guarantee.

• Please read these instructions

thoroughly and retain for future

use.

• All products manufactured

and supplied by Bristan are safe

provided they are installed, used

correctly and receive regular

maintenance in accordance with

these instructions.

• If you are in any doubt

about your ability to install this

product safely you must employ

the services of an experienced

qualiﬁed plumber/electrically

qualiﬁed person.

• Warning: Do not

operate the product

if you suspect it is

frozen. Do not site

the product where it might be

subjected to freezing conditions.

• These ﬁttings need to be

installed in accordance with, and

meet the requirements of the

Water Supply (Water Fittings)

Regulations 1999

and current byelaws.

• Remove all packaging and

check the contents for damage

before starting installation

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Important Safety Information

Power Supply Box Inlet Connection: G1/2”.

Power Supply Box Outlet Connection:

G1/2”

Operating Pressure Range: Min. 1.0 Bar -

Max. 5.0 Bar

Maximum Static Pressure: 10 Bar

Inlet Water Supply Temperature Range:

5°C - 45°C

Power Supply: AC: 220V-240V; 50/60H

DC: 6V (4 x AA alkaline batteries - Not

Supplied)

Power Consumption: Static <0.3MW

Active: <3W

Sensing Range: 23-26cm

Self-close Override Time: 55 seconds ± 5

seconds

Recommended Usage

Domestic Heavy

Commercial

Light

Commercial Health Care

This product has been tested to meet the

requirements of the Water Regulations

Advisory Scheme (WRAS) and satisﬁes

the requirements of the Water Supply

(Water Fittings) Regulations 1999 and

current byelaws.

BS 6700 recommends the temperature

of stored water should never exceed

65°C. A stored water temperature of

60°C is considered sucient to meet all

normal requirements and will minimise

the build up of limescale in hard water

areas.

This product should be installed in

compliance with the current Water

Regulations.

If in doubt, contact a registered plumber

or your Local Water Authority or the

Secretary of The Institute of Plumbing,

address as follows;-

The Institute of Plumbing,

64 Station Lane,

Hornchurch,

Essex, RM12 6NB

Tel:01708 472791

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Speciﬁcation

Water Ecient

When the users hands enter the sensing

range, the indicator light in the sensor

will illuminate. Water will ﬂow out

immediately until the user draws their

hands back from the sensor.

The water will automatically stop after

a maximum of 55 seconds ± 5 seconds

to avoid wasting water. If more water is

required wait 4 seconds and then place

hands back in the sensing range.

More Hygienic

The proximity sensor removes the need

to touch the spout body, reducing the

spread of germs and reducing the chance

of cross infection.

Battery Override

In the event of a power failure, the

product will automatically switch to

battery operated mode to ensure the

spout continues to function. The tap can

also operate on the battery alone if no

mains power source is available.

Low Battery Warning

When the batteries run low and the

power falls below 3.9V the sensor light

will ﬂicker to indicate the batteries are

running low and need replacing.

When the batteries are exhausted the

sensor light will not light up.

IRBS1-CP

IRBS2-CP

IRWS1-CP

Sensor

underneath

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 5

Product Features

155

158

120

140

50 185

102

IRBS1-CP

IRBS2-CP

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Dimensions (mm)

50 230

208

IRWS1-CP

110

Power Supply Box

110

105 105

G1/2 G1/2

120 120

125 125

Ø8

IRBS1-CP & IRBS2-CP IRWS1-CP

G1/2

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 7

Dimensions (mm)

Electrical Connections

Regulations: The electrical installation

must be carried out in accordance with

the national electrical regulations and

installed by a qualiﬁed person.

Safety: In the interests of electrical

safety a 30 mA residual current device

(R.C.D not supplied) should be installed

in the supply circuit. This may be part of

a consumer unit or a separate unit.

Before starting work on the electrical

supply ensure the power supply is

isolated.

DO NOT allow the supply cord to

contact hot surfaces. The cord should

be safely routed and secured by cable

clips.

Connections: The power supply box

must be permanently connected to the

ﬁxed wiring of the mains supply using

the factory ﬁtted supply cord, via a

switched fused spur o the ring main.

The wires in the mains lead are coloured

in accordance with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the

mains lead of this appliance may not

correspond with the coloured markings

identifying the terminals in your

connection unit proceed as follows;-

The wire which is coloured blue must

be connected to the terminal which is

marked with the letter ‘N’ or is coloured

black.

The wire which is coloured brown must

be connected to the terminal which is

marked with the letter ‘L’ or is coloured

red.

Fuse: This following fuse size should be

used.

Model Fuse Size

(AMPS)

IRBS1-CP 3

IRBS2-CP 3

IRWS1-CP 3

Supply Cord Replacement

If the supply cord is damaged, it must

be replaced by a genuine Bristan supply

cord. Contact Bristan Customer Services

on 0330 026 6273 to request new spare

parts.

N L

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

Sensor

Cable

Sensor

Cable

IRBS1-CP

1. Fit The Spout

Fit the spout to the sink / work surface

ensuring the sensor cable is threaded

through the hole in the sink / work

surface.

Important: It is advised

to ensure that the

product is at least

360mm away from

reﬂective surfaces to prevent the tap

from automatically switching on and o.

2. Secure Spout to Sink/Work Surface

Thread the rubber washer and metal

washer onto the ﬁxing rod up to the

underside of the sink/work surface.

Secure the spout in place by screwing

the ﬁxing nut onto the ﬁxing rod.

Tighten the ﬁxing nut using a suitable

spanner.

3. Connect Sensor Cable

Go to the ‘Electrical Connections’

section.

4. Connect Water Supplies

Screw the ﬂexi hose into the bottom of

the ﬁxing rod, ensuring it is tightened

fully by hand only.

Connect the ﬂexi hose to the

power supply box. Go to the ‘Water

Connections’ section.

Flexi Hose

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 9

Installation

IRBS2-CP

1. Fit The Spout

Screw the ﬁxing rods into the bottom of

the spout.

Fit the spout to the sink / work surface

ensuring the sensor cable is threaded

through the hole in the sink / work

surface.

Important: It is advised

to ensure that the

product is at least

360mm away from

reﬂective surfaces to prevent the tap

from automatically switching on and o.

2. Secure Spout to Sink / Work Surface

Thread the rubber washer and metal

washer onto the ﬁxing rods up to the

underside of the sink / work surface.

Secure the spout in place by screwing

the ﬁxing nuts onto the ﬁxing rods.

Tighten the ﬁxing nuts using a suitable

spanner.

3. Connect Sensor Cable

Go to the ‘Electrical Connections’

section.

4. Connect Water Supplies

Screw the ﬂexi hose into the bottom of

the spout, ensuring it is tightened fully

by hand only.

Connect the ﬂexi hose to the

power supply box. Go to the ‘Water

Connections’ section.

Sensor

Cable

Sensor

Cable

Flexi

Tail

Flexi Hose

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation

Andere Handbücher für IRBS1-CP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan N2 SHCDIV C (D7) Verdrahtungsschema

Bristan

Bristan W BASIN08 C Verdrahtungsschema

Bristan

Bristan RO2 SHXAR C Montageanleitung

Bristan

Bristan W BATH05 C Verdrahtungsschema

Bristan

Bristan Cinnamon Verdrahtungsschema

Bristan

Bristan K SNKSL EF C Bedienungsanleitung

Bristan

Bristan Opac Series Montageanleitung

Bristan

Bristan SOQ2 SHUAR C Montageanleitung

Bristan

Bristan GLE385 W Montageanleitung

Bristan

Bristan Z 1/2 C Bedienungsanleitung

Bristan

Bristan VR1000 Bedienungsanleitung

Bristan

Bristan Joy ThermoSafe Series Montageanleitung

Bristan

Bristan Zing Safe Touch Bar Mixer Multi Mode Kit Verdrahtungsschema

Bristan

Bristan Pivot Series Bedienungsanleitung

Bristan

Bristan Blade BL BAS C Bedienungsanleitung

Bristan

Bristan W BASIN01 C Verdrahtungsschema

Bristan

Bristan JU BAS C Bedienungsanleitung

Bristan

Bristan Mios MIO BSM C Verdrahtungsschema

Bristan

Bristan Z TC 1/2 C Bedienungsanleitung

Bristan

Bristan Quest Easyfit Verdrahtungsschema

Bristan

Bristan Cadet Verdrahtungsschema

Bristan

Bristan IRBS4-CP Montageanleitung

Bristan

Bristan W BTH PU1 C/G Bedienungsanleitung

Bristan

Bristan PIV BAS C Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung