Child Craft Redmond F32801 Bedienungsanleitung

AB20062G

AB20062_G3

SINCE 1954

Assembled as Crib

AB20062_G4

Assembled as Toddler Bed

SUGGESTED TOOLS

#2 Medium Straight Screwdriver

Foundations Worldwide, Inc.

5216 Portside Dr., Medina, OH 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037

www.foundations.com

Redmond 4-in-1 Convertible Crib

ASSEMBLY ASSISTANCE

IMPORTANT: retain for future reference read

carefully.

Foundations strives for the highest quality in our

products but occasionally a missing part or problem

can occur during assembly.

If any parts are missing or broken or you need

assistance with assembly, DO NOT return the

product to your dealer. Go to our website at

www.foundations.com or call Foundations

for assistance at 1-877-716-2757 (U.S. Only) or

1-330-722-5033 (Monday through Friday, 9:00

a.m.– 4:00 p.m. Eastern Time). Please have the

model number and manufacture date available

when you call or write us at:

Foundations, 5216 Portside Dr. Medina OH. 44256

KEEP INSTRUCTIONS FOR FUTURE USE

FOR CUSTOMER SERVICE CALL

1-877-716-2757

(outside of U.S. 330-722-5033). DO NOT CALL

RETAILER OR RESELLER FOR SERVICE

AS THEY ARE NOT AUTHORIZED TO

RESOLVE ANY SERVICE ISSUES.

FOR WARRANTY AND FEDERAL SAFETY STANDARD

COMPLIANCE CERTIFICATES,

PLEASE VISIT OUR WEBSITE AT

www.foundations.com

Record the information for your product here:

Model number:

Manufacture date:

PO number:

Models Covered: F32801.

• Adult assembly required.

• Read all instructions BEFORE assembly and USE

of product.

• Unpack carton, remove packing materials,

including poly bag. Identify and check all parts.

ASSEMBLY INSTRUCTIONS

THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN THE UNITED STATES

A. Stationary Side Assembly

B. Long Foot Assembly

C. Short Foot Assembly

D. Short Head Assembly

E. Stationary Post Left

F. Stationary Post Right

G. Top Back Rail Assembly

H. Base Front Rail Assembly

I. Foot Post Left

J. Foot Post Right

K. Cleat

L. Guard Rail Extender

M. Post Cap Left

N. Post Cap Right

O. Spring

P. Allen Head Bolt 6mm x 80mm

Q. Allen Head Bolt 6mm x 70mm

R. Allen Head Bolt 6mm x 45mm

S. Allen Head Bolt 6mm x 25mm

T. Allen Head Bolt 6mm x 14mm

U. Connector Nut 6mm

V. Joint Connector Nut 6mm

AA. Dowel Pin 8mm x 40mm

BB. Allen Wrench 4mm

Figure 1

STEP 1

Hardware Package

AB20069_G2

TUV

Crib Parts

PARTS LIST

Part Description Part Number Quantity

22301109

22301118

22301138

22301129

22301115

22301117

22301139

22301122

22301126

22301128

22301137

22300316

22301143

22301144

11200404

11200324

11200332

11200373

11200327

11200328

11200331

11200330

11200348

11200070

PREPARATION

Carefully remove and lay out all hardware and parts.

Check quantities and match the parts list.

Construct Crib on an even at oor.

Note: during the assembly process whenever

using screws or bolts, Check each with the parts list

by letter and size identication. Place each screw

or bolt on the diagram of the item which is sketched

actual size. Be sure to use the proper size specied

in the assembly directions. If any parts are missing

or broken or you need assistance with assembly.

DO NOT return your product to the dealer.

Please identify the crib by the model number

identication stamped on the inside face of the

Short Head Assembly or Short Foot Assembly when

you call or write to Foundations. Make note of all

identification numbers and include this information

with your request.

The Allen Head Bolts (S) and (T) have a friction

enhancing patch on the thread which may cause

resistance during tightening

DO NOT Substitute Parts!

AB20062_G5

STEP 2

Construct Short Foot and Head assembly:

Short Head Assembly:

Insert Allen Head Bolts (S) and (T) and Connector

Nuts (U) into holes in Foot Post Left (I) and

Stationary Post Left (E) as shown to ll in unused

Holes. Tighten Bolts with Allen Wrench (BB).

Align Stationary Post Left (E) with Short Head

Assembly (D). Insert Allen Bolts (R) and Snug Bolts

with Allen Wrench.

Align Foot Post Left (I) with Short Head Assembly

(D). Insert Allen Bolts (R) and Snug Bolts with Allen

Wrench.

Align Cleat (K) with 2 holes in the lower front of

Short Head Assembly (D). Insert Allen Bolts (R) and

Snug Bolts.

Tighten all Nuts and Bolts securely.

See gure 1.

Repeat the above procedure with Short Foot

Assembly (C) Stationary Post Right (F) and Foot

Post Right (J).

Figure 2

AB20072_G6

Stationary Side Assembly to Short Head Assembly:

Place Joint Connector Nuts (V) into holes in the

bottom of top rail Stationary Side Assembly (A) and

bottom of bottom rail of Stationary Side Assembly

(A). Align Stationary Post Left (E) with Stationary

Side Assembly (A). Insert Allen Head Bolts (P) into

lower 2 holes of Stationary Post Left (E) and Rotate

Joint Connectors Nuts to align threads with bolts

and snug with Allen wrench.

Insert Dowel Pin (AA) into center hole of the Top

Back Rail Assembly (G). Place Joint Connector Nut

(V) into hole in the back of Back Rail Assembly (G).

Place groove in bottom of Back Rail Assembly (G)

over tenon in top of Stationary Side Assembly (A).

Insert Allen Head Bolt (P) into Stationary Post Left

(E) and Rotate Joint Connectors Nut to align threads

with bolts and snug with Allen wrench.

Tighten all Nuts and Bolts securely.

See gure 2.

AB20062_G1

CDEF

Figure 3

STEP 3

AB20069_G7

STEP 4

Figure 4

AB20062_G8

Figure 5

STEP 5

Add Mattress Spring to crib.

There are 2 positions for the Spring (O) shown as

(1) and (2). Refer to warning section to determine

appropriate height for the intended child. The

position must be the same as for all the brackets

attached to the crib.

Note: Pouches containing warnings and instructions

face up on top surface of Spring.

Position tabs on Spring at approximately a 45

degree angle. The Spring (O) is lowered into the

crib. Take care not to scratch the wood with the

metal Spring. Align the Spring Brackets with the

holes in the crib at the desired height. Insert

Allen Bolt (T) into hole in spring brackets from inside

of crib then through correct height hole in the crib

together with Connector Nut (U). Insert

Connector Nuts (U) and Allen Head bolts (T) into

unused Holes.

Tighten all bolts securely with Allen Wrenches.

To Adjust height of Spring (O) remove Nuts and

Bolts. Then relocate Spring (O) to new height

adjustment level and install Nuts and Bolts as

described in previous paragraph.

See gure 5.

Stationary Side Assembly to Short Foot Assembly:

Insert Dowel Pin (AA) into center hole of the top rail

of Top Back Rail Assembly (G). Place Joint

Connector Nuts (V) into holes in the back of Top

Back Rail Assembly (G) and bottom of top and

bottom rail of Stationary Side Assembly (A). Align

Stationary Post Right (F) with Stationary Side

Assembly (A). Insert Allen Head Bolts (P) into

Stationary Post Right (F) and Rotate Joint

Connectors Nuts to align threads with bolts and

snug with Allen wrench .

Tighten all Nuts and Bolts securely.

See gure 3.

Assemble Base Front Rail Assembly to crib.

Assemble slots on top of Base Front Rail Assembly

(H) over tenon on bottom of Foot Posts (I) and (J).

Insert Allen Head Bolt (R) through Cleat (K) and into

Base Front Rail Assembly (H).

Tighten all Nuts and Bolts securely.

See gure 4.

AB20062_G9

AB20062_G10

AA AA

Figure 6

STEP 6

Construct Long Foot Assembly to crib:

Insert dowel pins (AA) into top of Foot Posts (I) and

(J). Align Long Foot Assembly (B) between Foot

Posts (I) and (J) and push down onto Dowel Pins.

Insert Joint Connector Nuts (V) into Long Foot

Assembly rails. Insert Allen Bolts (P) through Foot

Posts. Rotate Joint Connectors Nuts to align threads

with Bolts and snug with Allen wrench .

Insert additional Allen Bolts (P) into Bottom of Base

Front Rail Assembly (H) and into Long Foot

Assembly (B).

Tighten all Nuts and Bolts securely.

See gure 6

Toddler Bed

Figure 7

AB20062_G12

Toddler bed conversion:

Follow assembly instructions up to and including

installation of Base Front Rail Assembly (H) shown

in Step 4.

Spring (O) should be assembled and installed in the

lowest position as shown in Step 5.

If the Long Foot Assembly (B) is in place it must

be removed. Save the hardware and Assembly for

future possible use.

Holes remaining from the Removal of the Long Foot

Assembly (B) must be lled with Connector Nuts (U)

and Allen Bolts (S) to prevent nger entrapment.

Insert Dowel Pins (AA) into top of Foot Posts (I) and

(J). Align Post Cap Left (M) onto Foot Post Left (I)

and press onto Dowel Pins. Insert Allen Head Bolt

(S) through Post cap into Foot post and tighten.

Repeat above procedure with Post Cap Right (N)

onto Foot Post (J).

See gure 7.

WARNING

WARNING:INFANTS HAVE DIED IN TODDLER BEDS FROM

ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a

small child. NEVER use bed with children younger than 15 months. ALWAYS follow

assembly instructions.

WARNING:STRANGULATION HAZARD: NEVER place bed near windows

where cords from blinds or drapes may strangle a child. NEVER suspend strings

over bed. NEVER place items with a string, cord or ribbon, such as hood strings or

pacifier cords, around a child’s neck. These items may catch on bed parts.

CAUTION:ENTRAPMENT HAZARD: To avoid dangerous gaps, any

mattress used in this bed shall be a full-sized crib mattress at least 51 5/8 in. (1310

mm) in length, 27 1/4 in. (690 mm) in width, and 4 in. (100 mm) in thickness.

• The users maximum weight shall not be greater than 50 lbs. (22.7 kg).

• Mattress MUST be moved into lowest position for proper positioning.

•This crib contains all components necessary to convert to a toddler bed. However,

a guardrail may be available for purchase to provide additional security. Contact

Foundations for assistance. Refer to maintenance section for contact

information.

WARNING

WARNINGS (For Toddler Bed)

Guard Rail Option and Installation

For added security, a guard rail can be purchased for

this crib. Contact Foundations or your dealer.

Follow the directions supplied with the purchased

Guard Rail.

Note: 4 of the Allen Head Bolts (P) and (2) Guard

Rail extenders (L) will be needed to attach the Guard

Rail.

Guard Rail extenders (L) must be installed between

Guard Rail and Foot Posts (I) and (J) for this crib. If

the Long Foot Assembly (B) is in place it must be

removed. Save the hardware and assemblies for

future possible use.

Holes remaining from the Removal of the Long Foot

Assembly and Stretcher must be lled with

Connector Nuts (U) and Allen Bolts (S) after Guard

Rail is installed to prevent nger entrapment.

Note:Keep All parts and these instructions for Further

use and reference. General guard rail instructions

will be included in the guard rail kit.

Post Caps (M) and (N) must be installed using the

Toddler Bed conversion instruction.

See gure 8.

AB20062_G14

Figure 8

Finishing Touches

Place a purchased full sized mattress on the spring.

After completing the crib assembly, and after

making yourself aware of WARNINGS, CAUTIONS,

CLEANING,STORAGE,USE and MAINTENANCE

of crib on pages 9 and 10, store the assembly

directions in the pouch which was pre-attached to

the spring. For future referral to assembly directions

you will only need to remove them from the pouch.

We caution you not to store excess hardware in

pouch as this would be a danger to child if retrieved

by him/her.

AB20062_G11

Maintenance Cleaning and Storage

MAINTENANCE:

Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and

secure.

Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after

assembly and frequently during use.

DO NOT use crib if any parts are missing or broken.

If any parts are missing, broken or you need Assistance DO NOT return crib to your dealer.

Call Foundations at 330.722.5033 and include model identication numbers recorded on page 1.

DO NOT substitute parts.

CLEANING:

Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly

dampened in the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a

soft dry cloth.

DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s

skin, scouring pads, steel wool or coarse rags. This crib should be treated the same as any ne

furniture.

STORAGE:

When storing crib use Caution as extreme temperature or humidity changes could be harmful.

Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away

from any wood furniture item.

After completing the assembly the user is advised to read and be aware of

ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE AND MAINTENANCE notices in these

directions and printed on the storage pouch on the crib spring. A printed pouch is attached to the

crib spring for the permanent storage of the assembly directions. Please place the complete set of

assembly directions into the pouch for future referral. We caution the user to Not place excess

hardware in the pouches as it could present danger to the child if retrieved.

CAUTION

•ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST

27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING

6 IN. IF YOUR CRIB IS DESIGNED TO CONVERT TO A

TODDLER BED, THE MATTRESS MUST BE AT LEAST 4 IN.

(100 MM ) THICK.

• UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND

FASTENING DEVICES HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK

SHOULD BE MADE OF ALL SCREWS, BOLTS AND FASTENING DEVICES AND

TIGHTEN IF NEEDED.

Full Size Bed Conguration

Figure 9

2AB20062_G12

Full Size Bed conversion:

The crib can be converted to a full size bed with the

purchase of a bed rail and slat kit from

Foundations®.

Use Allen Bolts (Q) from existing hardware and

re-use the Joint Connectors (V).

Remove and save the Short Foot Assembly (C) and

Short Head Assembly (D) for future use.

For further Full size bed conguration refer to

instructions with the bed rails and slats.

See gure 9.

• Read all instructions before assembling crib. Keep instructions for future use. A

pouch is attached to the crib for permanent storage of the instructional literature.

• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on

their backs to sleep, unless otherwise advised by your physician.

• Strings can cause strangulation! DO NOT place items with a string around a child’s

neck, such as hood strings or pacifier cords. DO NOT suspend strings over a crib

or attach strings to toys.

• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing

on loose fasteners.

• DO NOT place crib near window where cords from blinds or drapes may strangle a child.

•When child is able to pull to standing position, set mattress to lowest position and remove

bumper pads, large toys and other objects that could serve as steps for climbing out.

• Stop using crib when child begins to climb out or reaches the height of 35 in. (89 cm).

• After raising side, make sure latches are secure (if your unit has a movable side).

• DO NOT leave child in crib with side lowered. Be sure side is in raised and locked position

whenever child is in crib (if your crib has a moveable side).

• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing

parts or sharp edges before and after assembly and frequently during use. Securely tighten bolts

and other fasteners. DO NOT use the crib if any parts are missing, damaged or broken. If any

parts are missing or broken or you need assistance with assembly, DO NOT return the product to

your dealer. Call Foundations for assistance at 1 877.716.2757 (U.S. Only) or +1 330.722.5033 for

replacement parts and instructional literature if needed. Include model identication numbers

recorded on page 1 with your request. DO NOT substitue parts.

• Replace teething rail(s) if damaged, cracked or loose (if equipped with teething rails).

• If renishing use a non-toxic nish specied for children’s products.

• Follow warnings on all products in a crib.

• NEVER use plastic shipping bags or other plastic lm as mattress covers because they can

cause suffocation.

• Infants can suffocate in gaps between crib sides and a mattress that is too small.

• DO NOT use a water mattress with this crib.

• When disassembling this crib, DO NOT remove any item attached with wood screws.

Meets CPSC

Safety Requirements

SINCE 1954

5216 Portside Dr.

Medina Ohio 44256 USA

Telephone: 330.722.5033

Fax: 330.722.5037

www.child-craft.com

www.foundations.com

WARNING

WARNING: Infants can suffocate on soft bedding. NEVER add a pillow

or comforter. NEVER place additional padding under an infant.

FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT

IN SERIOUS INJURY OR DEATH.

WARNING

Andere Handbücher für Redmond F32801

Inhaltsverzeichnis

Andere Child Craft Baby- und Kleinkindmöbel Handbücher

Child Craft

Child Craft DOUBLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft DOUBLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft F01216 Bedienungsanleitung

Child Craft

Child Craft Parisian Full Size Wood Crib F12301 Bedienungsanleitung

Child Craft

Child Craft Stella F32201 Bedienungsanleitung

Child Craft

Child Craft Wadsworth 31301 Bedienungsanleitung

Child Craft

Child Craft Crib'N'Double Bed Bedienungsanleitung

Child Craft

Child Craft Monterey F10391 Bedienungsanleitung

Child Craft

Child Craft SINGLE DROPSIDE CRIB Bedienungsanleitung

Child Craft

Child Craft Lucas F06709 Bedienungsanleitung

Child Craft

Child Craft Legacy Crib Bedienungsanleitung

Child Craft

Child Craft Lucas F36701 Bedienungsanleitung

Child Craft

Child Craft Orbit F30201 Bedienungsanleitung

Child Craft

Child Craft Kieran F33201 Bedienungsanleitung

Child Craft

Child Craft Jordyn F05419 Bedienungsanleitung

Child Craft

Child Craft F32401 Bedienungsanleitung

Child Craft

Child Craft Denman F33601 Bedienungsanleitung

Child Craft

Child Craft CONVERTS TO TODDLER BED AND FULL SIZE HEADBOARD AND... Bedienungsanleitung

Child Craft

Child Craft Bristol F99040 Bedienungsanleitung

Child Craft

Child Craft Long Beach F02109 Bedienungsanleitung

Child Craft

Child Craft F99106.26 Bedienungsanleitung

Child Craft

Child Craft Folding Mini Wood Crib F61301 Bedienungsanleitung

Child Craft

Child Craft CRIB'N'DOUBLE BED Bedienungsanleitung

Child Craft

Child Craft F02316 Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung