Endress+Hauser Liquistation CSF48 Gebrauchsanweisung

Products Solutions Services

BA00464C/07/EN/17.12

71208852

Valid as of:

Softwareversion 01.04.00

Operating Instructions

Liquistation CSF48

Automatic sampler for liquid media

Operation & settings

Operation concept

a0013353-en

Abb. 1: Pressing the soft key: selecting the menu directly

a0013354-en

Abb. 2: Turning the navigator: moving the cursor in the

a0013355-en

Abb. 3: Pressing the navigator: launching a function

a0013356-en

Abb. 4: Turning the navigator: selecting a value (e.g. from a

list)

a0013357-en

Abb. 5: Pressing the navigator: accepting the new value

a0013358-en

Abb. 6: Result: new setting is accepted

Liquistation CSF48

Table of contents

1 About this manual . . . . . . . . . . . 5

2 General settings . . . . . . . . . . . . . 6

2.1 Basic settings . . . . . . . . . . . . . . . . . . . . . . . 6

2.2 Date and time . . . . . . . . . . . . . . . . . . . . . . . 7

2.3 Automatic hold (optional) . . . . . . . . . . . . 8

2.4 Logbooks . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.5 Configuring the sampling depending on the

device version . . . . . . . . . . . . . . . . . . . . . . 13

2.6 Extended setup . . . . . . . . . . . . . . . . . . . . 18

3 Inputs . . . . . . . . . . . . . . . . . . . . . 24

3.1 Binary inputs . . . . . . . . . . . . . . . . . . . . . . 24

3.2 Current inputs . . . . . . . . . . . . . . . . . . . . . 28

4 Programming . . . . . . . . . . . . . . 32

4.1 Overview of the possible program types 33

4.2 Program type: Basic . . . . . . . . . . . . . . . . . 37

4.3 Program types: Standard and Advanced 57

4.4 Selecting and executing the program . . 80

5 Outputs . . . . . . . . . . . . . . . . . . . 82

5.1 Binary outputs . . . . . . . . . . . . . . . . . . . . . 82

5.2 Current outputs (optional) . . . . . . . . . . . 85

5.3 Alarm relays . . . . . . . . . . . . . . . . . . . . . . . 87

5.4 HART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

5.5 PROFIBUS DP . . . . . . . . . . . . . . . . . . . . . . 90

5.6 Modbus RS485 and Modbus TCP . . . . . 91

6 Additional functions . . . . . . . . 92

6.1 Limit switch . . . . . . . . . . . . . . . . . . . . . . . 92

6.2 Cleaning programs . . . . . . . . . . . . . . . . . 96

6.3 Mathematical functions . . . . . . . . . . . . . 98

7 Communication . . . . . . . . . . . 103

7.1 Web server . . . . . . . . . . . . . . . . . . . . . . . 103

7.2 Service interface . . . . . . . . . . . . . . . . . . . 105

7.3 Fieldbuses . . . . . . . . . . . . . . . . . . . . . . . . 106

8 Information on sensors with the

Memosens protocol . . . . . . . .107

9 Inputs: General . . . . . . . . . . . .108

9.1 Configuration . . . . . . . . . . . . . . . . . . . . 108

9.2 Frequently occurring functions . . . . . . 108

10 Inputs: pH/ORP Incl. combi

sensors . . . . . . . . . . . . . . . . . . .115

10.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 115

10.2 Extended setup . . . . . . . . . . . . . . . . . . . 116

11 Inputs: Conductivity . . . . . . . .124

11.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 124

11.2 Extended setup . . . . . . . . . . . . . . . . . . . 130

12 Inputs: Oxygen . . . . . . . . . . . .134

12.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 134

12.2 Extended setup . . . . . . . . . . . . . . . . . . . 135

13 Inputs: Chlorine . . . . . . . . . . .144

13.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 144

13.2 Extended setup . . . . . . . . . . . . . . . . . . . 145

14 Inputs: Turbidity and solids .152

14.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 152

14.2 Extended setup . . . . . . . . . . . . . . . . . . . 153

15 Inputs: SAC . . . . . . . . . . . . . . . 157

15.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 157

15.2 Extended setup . . . . . . . . . . . . . . . . . . . 158

16 Inputs: Nitrate. . . . . . . . . . . . . 162

16.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 162

16.2 Extended setup . . . . . . . . . . . . . . . . . . . 163

17 Inputs: ISE . . . . . . . . . . . . . . . .167

17.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 167

17.2 Extended setup . . . . . . . . . . . . . . . . . . . 168

17.3 Electrode slot menus . . . . . . . . . . . . . . 169

17.4 Limits operating hours . . . . . . . . . . . . . 176

Liquistation CSF48

18 Inputs: Interface. . . . . . . . . . . 177

18.1 Basic settings . . . . . . . . . . . . . . . . . . . . . 177

18.2 Manual hold . . . . . . . . . . . . . . . . . . . . . 177

18.3 Tank configuration . . . . . . . . . . . . . . . . 178

18.4 Sensor signal . . . . . . . . . . . . . . . . . . . . . 179

18.5 Extended setup . . . . . . . . . . . . . . . . . . . 180

Index . . . . . . . . . . . . . . . . . . . . 183

Liquistation CSF48 About this manual

1 About this manual

This manual gives a detailed account of all the configuration options in the "Setup" menu.

A description of the following menus is provided here:

• Inputs

– Input configuration

– Split into separate sections based on the different types of sensor that can be connected

Some submenus are identical for all sensor types.

These submenus are repeated in each input-specific section to make sure you can find

the information you need quickly and easily.

•Outputs

– Output configuration

– Split into separate sections based on the different output types

• Sampling programs

– Creating sampling programs

– Configuring different types of programs

• Additional functions

– Settings for the alarm sensor

– Cleaning program configuration

• Data management

– Firmware updates

– Saving and loading configurations

This manual does not include the following:

• Setup/General settings

--> Operating Instructions BA00443C "Commissioning"

• Display/Operation

--> Operating Instructions BA00443C "Commissioning"

• Calibration

--> Operating Instructions BA00467C "Calibration"

•Diagnostics

--> Operating Instructions BA00463C "Maintenance & diagnostics"

•Expert

--> Internal Service Manual

General settings Liquistation CSF48

2 General settings

Many settings are not visible when a program is running.

If a program is running, stop the program before making any settings!

2.1 Basic settings

Path: Menu/Setup/General settings

Function Options Info

Device tag Customized text,

32 characters

Select any name for your controller. Use the TAG name

for example.

Temperature unit Options

•°C

•°F

•K

Factory setting

°C

Current output range Options

• 0 to 20 mA

• 4 to 20 mA

Factory setting

4 to 20 mA

In accordance with Namur NE43, the linear range is

from 3.8 to 20.5 mA (Current output

range="4 to 20 mA") or from 0 to 20.5 mA (Current

output range="0 to 20 mA"). If the range is exceeded or

undershot, the current value stops at the range limit and

a diagnostics message (460 or 461) is output.

You must select the "4 to 20 mA" range for HART com-

munication.

Error current 0.0 to 23.0 mA

Factory setting

21.5 mA

The function meets NAMUR NE43.

Set the current value that should be output at the

current outputs in the event of an error.

The value for "Error current" should be outside the measuring range. If you decided that your Current output range

="0 to 20 mA", you should set an error current between 20.1 and 23 mA. If the Current output range

="4to20mA"youcouldalsodefineavalue<4mAastheerrorcurrent.

The device allows an error current within the measuring range. In such instances pay attention to possible affects

this may have on your process.

Alarm delay 0 to 9999 s

Factory setting

0 s

The system only displays the errors that are present

longer than the set delay time. This makes it possible to

suppress error messages that only occur briefly and are

caused by normal process-specific fluctuations.

Device Hold Options

• Disabled

•Enabled

Factory setting

Disabled

You can enable an immediate, general hold here. The

function has the same effect as the "HOLD" soft key in

the measuring screens.

Liquistation CSF48 General settings

2.2 Date and time

Path: Menu/Setup/General settings/Date/Time

Function Options Info

Set date Depends on the format Editing mode:

DD (day): 01 to 31

MM (month): 01 to 12

YYYY (year): 1970 to 2106

Set time Depends on the format Editing mode:

hh (hour): 00 to 23 / 0 am to 12 pm

mm (minutes): 00 to 59

ss (seconds): 00 to 59

Extended setup

Date format Options

• DD.MM.YYYY

• YYYY-MM-DD

• MM-DD-YYYY

Factory setting

DD.MM.YYYY

Decide which date format you want to use.

Time format Options

• HH:MM am (12h)

• HH:MM (24h)

• HH:MM:SS (24h)

Factory setting

HH:MM:SS (24h)

Decide whether you want to use the 12-hour or 24-hour

clock. Seconds can also be displayed with the latter

version.

Time zone Options

•None

• Choice of 35 time zones

Factory setting

None

If no time zone is selected, then Greenwich Mean Time

is used (London).

DST Options

•Off

•Europe

•USA

•Manual

Factory setting

Off

The controller adapts the summertime/normal time

changeover automatically if you choose European or

American daylight saving time.

Manual means that you can specify the start and end of

daylight saving time yourself. Here, two additional

submenus are displayed in which you specify the

changeover date and time.

General settings Liquistation CSF48

2.3 Automatic hold (optional)

If a device-specific hold is enabled, any cleaning that was previously started is stopped. You

can only start a manual cleaning if a hold is active.

Path: Menu/Setup/General settings/Automatic hold

Function Options Info

Device specific hold

Setup menu Options

• Disabled

•Enabled

Factory setting

Disabled

Decide whether a hold should be output at the current

output when the particular menu is opened.

Diagnostics menu

Calibration active Factory setting

Enabled

Hold release time 0 to 600 s

Factory setting

0 s

The hold is maintained for the duration of the delay

time when you switch to the measuring mode.

Liquistation CSF48 General settings

2.4 Logbooks

Logbooks record the following events:

• Calibration/adjustment events

• Operation events

• Diagnostic events

•Programmingevents

Here you define how the logbooks should store the data.

In addition, you are also able to define individual data logbooks. Assign the logbook name and

select the measured value to be recorded. You can configure the recording rate (Scan time)

individually for every data logbook.

More information on the logbooks is provided in BA00463C "Maintenance & diagnostics", "Dia-

gnostics menu" section.

Path: Menu/Setup/General settings/Logbooks

Function Options Info

Logbook ident Customized text Part of the file name when exporting a logbook

Event logbook Options

•Off

• Ring buffer

• Fill up buffer

Factory setting

Ring buffer

All diagnostic messages are recorded

Ring buffer

If the memory is full, the latest entry automatically

overwrites the oldest entry.

Fill up buffer

If the memory is 80% full, the device displays a diag-

nostic message.

If the memory is full, there is an overflow, i.e. no new

values can be saved. The controller displays a

corresponding diagnostic message. The memory then

has to be cleared manually.

Logbook program Options

•Off

• Ring buffer

• Fill up buffer

Factory setting

Ring buffer

All program messages are recorded

Ring buffer

If the memory is full, the latest entry automatically

overwrites the oldest entry.

Fill up buffer

If the memory is 80% full, the device displays a diag-

nostic message.

If the memory is full, there is an overflow, i.e. no new

values can be saved. The controller displays a

corresponding diagnostic message. The memory then

has to be cleared manually.

Overflow warnings

Event logbook="Fill up buffer"

Calibration logbook Options

•Off

•On

Factory setting

Off

Decide whether you want to receive a diagnostic

message from the controller in the event of memory

overrun of the logbook in question.

Diagnostic logbook

Configuration logbook

General settings Liquistation CSF48

Overflow warnings

Logbook program="Fill up

buffer"

Options

•Off

•On

Factory setting

Off

If the fill-up buffer overruns, you can decide whether

you want to receive a diagnostic message from the cont-

roller or not for each individual logbook.

Data logbooks

New You can create a maximum of 8 data logbooks.

Logbook name Customized text,

20 characters

Source of data Options

•None

• Binary input 1

• Binary input 2

• Analog input 1

• Analog input 2

• Temperature

Factory setting

None

Select the input that should be the data source of the

logbook entries.

Measured value Options

• Depends on Source of

data

Factory setting

None

You can record different measured values depending on

the source of data.

Scan time 00:00:01 to 01:00:00

Factory setting

00:01:00

Minimum interval between two entries

Format: HH:MM:SS

Data logbook Options

•Off

• Ring buffer

• Fill up buffer

Factory setting

Off

Ring buffer

If the memory is full, the latest entry automatically

overwrites the oldest entry.

Fill up buffer

If the memory is 80% full, the device displays a diag-

nostic message.

If the memory is full, there is an overflow, i.e. no new

values can be saved. The controller displays a

corresponding diagnostic message. The memory then

has to be cleared manually.

Overflow warning

Data logbook="Fill up

buffer"

Options

•Off

•On

Factory setting

Off

If the fill-up buffer overruns, you can decide whether

you want to receive a diagnostic message from the cont-

roller or not for each individual logbook.

Add another logbook Action Only if you want to create another data logbook

immediately.

You add a new data logbook at a later data using New.

Finished Action This allows you to exit the menu New.

Path: Menu/Setup/General settings/Logbooks

Function Options Info

Andere Handbücher für Liquistation CSF48

Inhaltsverzeichnis

Andere Endress+Hauser Laborausrüstung Handbücher

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TOne Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser Liquistation CSF48 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena TOPwave Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP51 Montageanleitung

Endress+Hauser

Endress+Hauser Analytik Jena InnuPure C16 touch Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant PQ 9000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF33 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena multi N/C Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline Control CDC90 Bedienungsanleitung

Endress+Hauser

Endress+Hauser ASP Station 2000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena CyBio FeliX Bedienungsanleitung

Endress+Hauser

Endress+Hauser asp-port d 2 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena PlasmaQuant 9100 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TSC ThermoShaker Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRIO Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena UVP Transilluminator Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena Biometra TOne Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 Technische Daten

Endress+Hauser

Endress+Hauser analytikjena Biometra TAdvanced Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TAdvanced Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP41C Montageanleitung

Endress+Hauser

Endress+Hauser analytikjena qTOWER Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TOne 96 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena qTOWER iris Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung