ETC Source Four Revolution Rotating Wheel Module Bedienungsanleitung

ETC®Quick Guide

Source Four®Revolution™ Rotating Wheel Module

Rotating Wheel Module Quick Guide Page 1 of 2 Electronic Theatre Controls, Inc.

Americas



3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA



Tel: +1 608 831 4116



800 688 4116



Fax: +1 608 836 1736



800 555 8912

Europe



Unit 5, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK



Tel: +44 (0)20 8896 1000



Fax: +44 (0)20 8896 2000

Asia



Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong



Tel: +852 2799 1220



Fax: +852 2799 9325

Web

: www.etcconnect.com



: (US) mail@etcconnect.com



(UK) mail@etceurope.com



(Asia) mail@etcasia.com

Service

: service@etcconnect.com



Toll free: 800 775 4382



Comments about this document: techcomm@etcconnect.com

7160M1330



Rev A



Released 02/2004



Overview

The Rotating Wheel Module contains a wheel with three rotating/indexing positions for

static M-size steel or glass gobos or dichroic color filters and an open position.

Install a gobo/filter:

Step 1: If module is currently installed:

a: Power-down the fixture by moving the power switch to the “off” position.

b: Remove the module from the fixture by loosening the two retaining screws and

pulling the module straight out of the head.

CAUTION:

Screws securing the modules, and the wheels themselves, may be hot if the fixture

has recently been lit. Allow the module to cool before installing gobos or filters.

Step 2: Remove the spring securing the gobo/filteryou want to replace or install. Use the

diagram below to determine the frame numbers on the wheel. The Rotating

Wheel Module has two magnets, one for calibrating the wheel position, and one

for calibrating the index position of the frames (found in the alignment hole of

frame #3).

M-Size Gobo

Detail: gobo installed

Open

(0)

Rotating Wheel Module

Magnets

Spring

Alignment Hole

Quick Guide:

Source Four®Revolution™ Rotating Wheel Module

Rotating Wheel Module Quick Guide Page 2 of 2 Electronic Theatre Controls, Inc.

Step 3: Remove the gobo/filter, if present.

Step 4: Insert the new gobo/filter in the frame. Use the hole in or near the frame (see

above for alignment hole locations) to align your gobo, if required.

CAUTION:

To preventcracking ofglass gobosandforbest image contrast, the silverreflective

surfaceof thegobomust facethe lamp andthe black surfaceofthe gobomustface

the lenses. Prolonged use of the Rotating Wheel Module in Bay #2 may cause the

belt within the module to degrade. To ensure peak performance of the RWM, use

it in Bay #1.

Step 5: Insert the spring into the frame. Ensure that the gobo/filter is held securely in

place and that the spring is fully inserted in the frame.

Step 6: Align the module in the selected bay with the interface connector closest to the

center bay divider.

Step 7: Guide the module gently into the bay making certain that the guide posts of the

module housing are properly aligned with the accommodating hole in the fixture

frame. Ensure that the module seats on the control card.

Step 8: Tighten the screws securing the module by turning them to the right (clockwise).

Ensure that the screws are tightened completely.

Bay #1

Bay #2

Inhaltsverzeichnis

Andere ETC Beleuchtungsausrüstung Handbücher

ETC

ETC Source 4WRD Bedienungsanleitung

ETC

ETC ColorSource Spot Bedienungsanleitung

ETC

ETC Sensor IQ DALI Control Option Card Bedienungsanleitung

ETC

ETC 3 Series Bedienungsanleitung

ETC

ETC Source Four Mini LED Bedienungsanleitung

ETC

ETC fos/4 Panel Pole-Operated Yoke Bedienungsanleitung

ETC

ETC D22 Desire series Bedienungsanleitung

ETC

ETC Sensor3 Bedienungsanleitung

ETC

ETC F-Drive W1 Series Bedienungsanleitung

ETC

ETC Desire D22 Bedienungsanleitung

ETC

ETC ArcSystem Pro Multi-Cell RDM Bedienungsanleitung

ETC

ETC microVision FX Bedienungsanleitung

ETC

ETC High End Systems SolaPix 7 Bedienungsanleitung

ETC

ETC Source 4WRD Bedienungsanleitung

ETC

ETC Halcyon Gold Bedienungsanleitung

ETC

ETC fos/4 Panel Yoke Bedienungsanleitung

ETC

ETC Echo Bedienungsanleitung

ETC

ETC Source Four Mini LED Bedienungsanleitung

ETC

ETC Source Four MultiPAR Bedienungsanleitung

ETC

ETC Source Four LED Series Bedienungsanleitung

ETC

ETC Source Four Zoom Bedienungsanleitung

ETC

ETC fos/4 Series Bedienungsanleitung

ETC

ETC ArcLamp System Bedienungsanleitung

ETC

ETC High End Systems SolaFrame 3000 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung