Interlogix TruVision HD-TVI 3MPX Merkblatt

TruVision HD-TVI 3MPX

Camera Configuration

Manual

P/N 1073217-EN • REV B • ISS 19JAN17

Interlogix is part of UTC Climate, Controls & Security, a unit of United

Technologies Corporation.

Trademarks and

patents

he TruVision and Interlogix names and logos are trademarks of

United Technologies.

Other trade names used in this document may be

trademarks or

registered trademarks of the manufacturers or vendors of the

respective products.

Manufacturer

Interlogix

2955 Red Hill Avenue, Costa Mesa, CA 92626

-5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat

7, 6003 DH Weert, The Netherlands

Contact information

For contact information, see www.interlogix.com or

www.utcfssecurityproducts.eu

Customer support

For contact information, see www.interlogix.com or

www.utcfssecurityproducts.eu

TruVision HD-TVI 3MPX Camera Configuration Manual 1

Content

Introduction 2

HD-TVI 3MPX IR Bullet Cameras 2

HD-TVI 3MPX IR Turret Cameras 2

Programming 3

Call up the camera OSD menu 3

Menu trees 5

TVB-2407/4407 (fixed lens bullet) and TVT-2401/4401 (fixed lens

turret) cameras 5

TVB-2408/4408 (motorized VF lens bullet) and TVT-2402/4402

(motorized VF lens turret) cameras 5

Configuration 6

FORMAT 6

FOCUS 6

MAIN MENU 6

AE (Auto Exposure) 6

WB (White Balance) 7

DAY/NIGHT 7

VIDEO SETTING 8

RESET 9

SAVE & EXIT 9

Preventing IR reflection 9

2 TruVision HD-TVI 3MPX Camera Configuration Manual

Introduction

This is the configuration manual for following camera models:

HD-TVI 3MPX IR Bullet Cameras

TVB-2407 (3MPX TVI Bullet Camera, Fixed Lens, IR, PAL)

TVB-4407 (3MPX TVI Bullet Camera, Fixed Lens, IR, NTSC)

TVB-2408 (3MPX TVI Bullet Camera, VF Motorized Lens, IR, PAL)

TVB-4408 (3MPX TVI Bullet Camera, VF Motorized Lens, IR, NTSC)

HD-TVI 3MPX IR Turret Cameras

TVT-2401 (3MPX TVI Turret Camera, Fixed Lens, IR, PAL)

TVT-4401 (3MPX TVI Turret Camera, Fixed Lens, IR, NTSC)

TVT-2402 (3MPX TVI Turret Camera, VF Motorized Lens, IR, PAL)

TVT-4402 (3MPX TVI Turret Camera, VF Motorized Lens, IR, NTSC)

TruVision HD-TVI 3MPX Camera Configuration Manual 3

Programming

Once the camera hardware has been installed, the camera can be configured

using the built-in OSD button (if supported) and the TVI DVR menu. The TVS-

C200 controller (Service Tool) does not support the 3MPX cameras.

You can also configure the camera settings via a TVI DVR. Select the PTZ

protocol TruVision Coax and click the menu button to call up the menu.

When using the TVI output, the 3MPX TVI cameras must be used with the higher

resolution (3MPX or higher) TVI DVRs. They are not compatible with lower

resolution TVI DVRs. Only the 960H/CVBS output is supported by the lower

resolution recorders (TVR 12HD/TVR 44HD).

Note: When making adjustments to the motorized lens bullet, it is important to

make sure that the access cover for the area that contains the video test cable

connector, OSD menu button, and the 960H/TVI selection switch is properly

tightened to prevent leakage. The access cover should be rotated until it is tight,

up against the camera body.

Call up the camera OSD menu

To set up the camera:

1. Set up the camera hardware as described in the Installation Manual.

2. In Camera Settings of the DVR, access the PTZ menu and set the protocol

for the TruVision HD-TVI camera to TruVision-Coax.

3. In live view of the desired camera, click the PTZ Control icon on the live view

toolbar to access the PTZ control panel.

4. To call up the camera setup menu:

From the camera, press the Menu button (if present).

— or —

From the camera OSD of the DVR, select Menu.

— or —

From the DVR, select Iris+.

The camera setup menu appears (see “Menu trees” on page 5 for the menu

structure).

5. Select the menu options:

From the DVR: To select an OSD item, click the directional buttons up/down.

To adjust the value of a selected item, click the directional buttons left/right.

From the camera (if it has a menu button): To select an OSD item, push

the Menu button up/down. To adjust the value of a selected item, push the

Menu button left/right.

6. Click Iris+ to enter the submenu or to confirm the selected item.

4 TruVision HD-TVI 3MPX Camera Configuration Manual

7. When the setup is complete, select Exit and click Iris+ to exit the camera

OSD.

Note: You cannot exit the camera setup menu using the Menu button on the

camera.

TruVision HD-TVI 3MPX Camera Configuration Manual 5

Menu trees

The menu trees of the TruVision TVI 3MPX cameras are shown below.

TVB-2407/4407 (fixed lens bullet) and TVT-2401/4401

(fixed lens turret) cameras

MAIN MENU

AE WB DAY

&NIGHT

VIDEO

SETTING RESET

SAVE

&EXIT

BRIGHTNESS

EXPOSURE

MODE

GAIN

ATW

MWB

COLOR

B/W

CONTRAST

SHARPNESS

COLOR

GAIN

DNR

MIRROR

SMART

FORMAT

SETUP

TVB-2408/4408 (motorized VF lens bullet) and TVT-

2402/4402 (motorized VF lens turret) cameras

MAIN MENU

AE WB DAY

&NIGHT

VIDEO

SETTING RESET

SAVE

&EXIT

BRIGHTNESS

EXPOSURE

MODE

GAIN

ATW

MWB

COLOR

B/W

CONTRAST

SHARPNESS

COLOR

GAIN

DNR

MIRROR

SMART

FORMAT FOCUS

SETUP

6 TruVision HD-TVI 3MPX Camera Configuration Manual

Configuration

This section describes how to set up the menu settings.

FORMAT

Move the cursor to FORMAT, and press the menu button to enter the submenu.

Set the format of the camera and confirm.

FOCUS

Move the cursor to FOCUS and press the menu button to enter the submenu.

Move the cursor to FOCUS+, FOCUS-, ZOOM+ and ZOOM-to adjust the

camera lens.

Note: As TVB-2407/4407 and TVT-2401/4401 are fixed lens cameras, they do

not support this feature.

MAIN MENU

AE (Auto Exposure)

AE describes the brightness-related parameters. Modify the image brightness

by adjusting the values for BRIGHTNESS, EXPOSURE MODE, and GAIN

depending on the lighting conditions.

EXPOSURE

BRIGHTNESS

EXPOSURE MODE

GAIN

FLICKER MODE

RETURN

BLC

MIDDLE

MODE1

BRIGHTNESS Brightness refers to the brightness of the image.

Set the brightness value from 1 to 10 to darken or brighten the image.

The higher the value, the brighter the image.

EXPOSURE MODE Select GLOBAL, BLC or WDR from the menu.

GLOBAL:This is the normal exposure mode to use for a wide range

of situations to achieve an optimum image.

BLC: BLC (Backlight Compensation) improves image quality when

the background illumination is high. It prevents the object in the

center of the image from appearing too dark. Set the LV value from 1

to 8 to increase the backlight compensation level

LV (level of backlight compensation) is only available when the BLC

mode is selected.

WDR: WDR (Wide Dynamic Range) provides clear images when

there are both very bright and very dark areas on the image. WDR

TruVision HD-TVI 3MPX Camera Configuration Manual 7

balances the brightness level of the whole image.

GAIN This optimizes the clarity of image under poor lighting conditions. Set

the gain as HIGH, MIDDLE, or LOW. The higher the gain value, the

clearer the image. Select OFF to disable the function.

Note: The noise will be amplified if the gain is enabled.

FLICKER MODE This is an anti-flicker function that is used when the camera is close

to a light source.

There are two modes that can be selected: MODE1 and MODE2.

MODE1: It is used in a normal situation that is set to default.

MODE2: It is used when the camera is close to a light source.

Note: This function is only available for motorized VF lens cameras

(TVB-2408/4408 and TVT-2402/4402).

WB (White Balance)

White balance (WB) tells the camera what the color white looks like. Based

on this information, the camera will then continue to display all colors correctly

even when the color temperature of the scene changes such as from daylight

to fluorescent lighting, for example.

Set the WB mode to ATW or MWB.

ATW Use ATW (automatic tracing white balance) to automatically adjust

the WB in real time as the lighting conditions change.

MWB Manually adjust the color temperature to meet your own requirements

by modifying the blue and red gain parameters. Only use this function

when there is steady light.

Set the R GAIN and B GAIN values from 0 to 255 to adjust the

shades of red and blue color of the image.

MODE

R GAIN

B GAIN

RETURN

M WB

DAY/NIGHT

This function defines whether the camera is in day or night mode. The day

(color) option should be used, for example, if the camera is located indoors

where light levels are always good.

Set the DAY/NIGHT mode as Color, B/W, or SMART.

COLOR The camera is always in day mode. The image is in color. Use this for

normal lighting conditions.

B/W The camera is always in night mode. The image is black and white.

The IR LED turns on in low lighting conditions.

8 TruVision HD-TVI 3MPX Camera Configuration Manual

SMART Select to turn on/off the INFRARED and to set the value of SMART

IR.

INFRARED: Select to turn on/off the IR LED depending on lighting

conditions.

SMART IR: Use it to avoid over exposure of an image due to IR LED

glare. Adjust the SMART IR value from 0 to 3. The higher the value,

the more obvious the effects. The option is disabled when the value

is 0.

VIDEO SETTING

Move the cursor to VIDEO SETTING and press the confirm button to enter

the submenu. Adjust the CONTRAST, SHARPNESS, COLOR GAIN, DNR

and MIRROR values to achieve the desired effect.

VIDEO SET TING

CONTRAST

SHARPNESS

COLOR GAIN

DNR

MIRROR

RETURN

DEFAULT

CONTRAST

This function enhances the difference in color and light between parts

of an image. Set the value from 1 to 10. The higher the value, the

stronger the contrast.

SHARPNESS This function determines the level of detail of an image. Set the value

from 1 to 10. The higher the value, the clearer and sharper the image

appears.

COLOR GAIN Adjust this function to change the saturation of the color. Set the

value from 1 to 10. The higher the value, the clearer the color of the

image.

DNR DNR (Digital Noise Reduction) reduces noise especially in low

lighting conditions to provide a more accurate and sharper image

quality. Set the value from 1 to 10. The higher the value, the higher

the noise reduction and the clearer the image.

Andere Handbücher für TruVision HD-TVI 3MPX

Inhaltsverzeichnis

Andere Interlogix Sicherheitskamera Handbücher

Interlogix

Interlogix TruVision TVB-2403 Merkblatt

Interlogix

Interlogix TruVision IP Dome Bedienungsanleitung

Interlogix

Interlogix TVD-5110-3 Bedienungsanleitung

Interlogix

Interlogix TVC-5120-1 Bedienungsanleitung

Interlogix

Interlogix UltraView IP PTZ 36X Bedienungsanleitung

Interlogix

Interlogix UVP-M1120P-18X-N Bedienungsanleitung

Interlogix

Interlogix TVB-2201 Bedienungsanleitung

Interlogix

Interlogix TruVision TVB-6102 Bedienungsanleitung

Interlogix

Interlogix 36X Bedienungsanleitung

Interlogix

Interlogix TruVision TVB-4410 Handbuch

Interlogix

Interlogix TruVision Open Standards Bedienungsanleitung

Interlogix

Interlogix TruVision TVD-6120VE-2 Bedienungsanleitung

Interlogix

Interlogix UVC-XP4DN-HR Bedienungsanleitung

Interlogix

Interlogix TruVision Line Handbuch

Interlogix

Interlogix TruVision Line Bedienungsanleitung

Interlogix

Interlogix TruVision TVD-2401 Bedienungsanleitung

Interlogix

Interlogix TruVision TVD-2404 Bedienungsanleitung

Interlogix

Interlogix TruVision TVB-5702 Merkblatt

Interlogix

Interlogix TruVision TVT-2101 Bedienungsanleitung

Interlogix

Interlogix TruVision TVD-2402 Bedienungsanleitung

Interlogix

Interlogix TVF-1101 Bedienungsanleitung

Interlogix

Interlogix UVC-XP4DN-HR-P Bedienungsanleitung

Interlogix

Interlogix TruVision TVD-N210V-2-N(-P) Bedienungsanleitung

Interlogix

Interlogix TruVision TVB-2402 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung