La Crosse Technology WS-9021U Bedienungsanleitung

Contents

Language Page

_______________________________________________________________

English

French

Spanish

TABLE OF CONTENTS

Topic Page

INVENTORY OF CONTENTS

QUICK SETUP

DETAILED SETUP GUIDE

BATTERY INSTALLATION

12 OR 24 HOUR TIME DISPLAY

TIME SETTING

FEATURES

MIN AND MAX TEMPERATURE

RESETTING MIN & MAX TEMPERATURE

ADDING ADDITIONAL THERMO-HYGRO SENSORS

VIEWING & OPERATING WITH MULTIPLE THERMO-HYGRO

SENSORS

MOUNTING

TROBLESHOOTING

MAINTENANCE AND CARE

SPECIFICATION

WARRANTY INFORMATION

This product offers:

NSTANT TRANSMISSIO

is the state-of-the-art

new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate update

(every 4 seconds!) of all your outdoor data

measured from the sensors: follow your climatic

variations in real-time!

FIGURE 1 Low Battery

Indicator Max icon

12 or 24 Hou

Time Display

Set/Channel

Button Minimum/Maximum

& Plus Button

Outdoor

Temperature

(°F or °C)

Sensor signal

reception icon

Figure 2

INVENTORY OF CONTENTS

1. Wireless Temperature Station (Figure 1)

2. Wireless Temperature Sensor (TX29) and mounting bracket. (Figure 2)

3. 3 each, 1/2” Philips screws.

4. One strip of double sided adhesive tape.

5. Instruction Manual and Warranty Card.

ADDITIONAL EQUIPMENT (not included)

1. 1 Philips screwdriver.

2. 4 Fresh “AA” 1.5VAlkaline Batteries.

QUICK SETUP

Hint: Use good quality Alkaline Batteries; avoid rechargeable batteries.

1. Have the Wireless Temperature Station and temperature sensor 3 to 5 feet

apart.

2. Batteries should be out of both units for 5 minutes.

3. Place the batteries into the Temperature sensor first and next into the

Wireless Temperature Station.

4. DO NOT PRESS ANY BUTTONS FOR 5 MINUTES.

In this time the Wireless Temperature Station and the temperature sensor will begin

to communicate with each other, and the display will show both the indoor

temperature and an outdoor temperature. If the Wireless Temperature Station does

not display both temperatures after the 5 minutes, please retry the set up as stated

above. After both indoor and outdoor temperatures are displayed for 5 minutes you

can place your temperature sensor outdoors, and set your time.

The temperature sensor should be placed in a dry, shaded area (ex: under the eve

of a roof). The temperature sensor has a range of 330 feet. Any walls that the

signal will have to pass through will reduce distance. An outdoor wall or window will

have up to 20 feet of resistance and an interior wall will have up to 10 feet of

resistance. Your distance plus resistance should not exceed 330 feet in a straight

line.

NOTE: Fog and mist will not harm your temperature sensor, but direct rain must be

avoided.

DETAILED SETUP GUIDE

BATTERY INSTALLATION - When one Temperature sensor is being used

1. First, insert the batteries to the Temperature sensor (see “Temperature

sensor” below).

2. Within 2 minutes of powering up the sensor, insert the batteries to the

Temperature Station (see “Wireless Temperature station” below). Once the

batteries are in place, all segments of the LCD will light up briefly. Following

the indoor temperature and the time as 12:00 will be displayed. If they are

not shown in LCD after 60 seconds, remove the batteries and wait for at least

60 seconds before reinserting them. Once the indoor data is displayed user

may proceed to the next step.

3. After the batteries are inserted, the Temperature Station will start receiving

data signal from the sensor. The outdoor temperature should then be

displayed on the Temperature Station. If this does not happen after 2

minutes, the batteries will need to be removed from both units and reset from

step 1 and the signal reception icon is no longer shown.

TEMPERATURE SENSOR

1. Remove the Battery Cover.

2. Observing the correct polarity, install 2 “AA”

Alkaline Batteries—make sure they do not spring

free, or start-up problems may occur.

3. Replace the Battery Cover.

WIRELESS TEMPERATURE STATION

Note: After the batteries are installed, DO NOT press any buttons. This may

interfere with the signals, causing temperatures to register incorrectly.

1. Remove the Battery Cover on

the back of the Wireless

Temperature Station.

2. Observing the correct polarity,

install 2 “AA” Alkaline

Batteries.

3. Replace Battery Cover.

Batter

compartment

Battery cover

Sensor signal

reception icon*

•*When the signal is successfully received by the Temperature Station, the

icon will be switched on. (If not successful, the icon will not be shown in LCD)

So the user can easily see whether the last reception was successful (icon

on) or not (icon off). On the other hand, the short blinking of the icon shows

that a reception is currently taking place.

•If the signal reception is not successful on the first frequency (915MHz) for

45 seconds, the frequency is changed to 920MHz and the learning is tried

another 45 seconds. If still not successful the reception is tried for 45

seconds on 910MHz. This will also be done for re-synchronization.

SELECTING 12 OR 24 HOUR TIME DISPLAY

1. Press and hold the set/ch button for about 5 seconds.

2. “12h” will begin to flash in the TIME section of the LCD

3. Press the min/max/+ button to toggle between “12h” and “24h” time.

Note:

•Selecting 12 hour time will automatically select °F as your temperature unit.

•Selecting 24 hour time will automatically select °C as your temperature unit.

4. Press and release the set/ch button again to enter Time Setting.

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-9004U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX231RW Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2814U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2315 Bedienungsanleitung

La Crosse Technology

La Crosse Technology V23 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S81120v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7013U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX141TH-B Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX31U-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology WW85777v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-9626U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7049U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today TX25U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Family Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9115TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WA-1340U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 082616 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology 327-1414Wv2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077U-IT Abmessungen

La Crosse Technology

La Crosse Technology WS-9210U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2317 Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-9032U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-62U Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung