Leica DM Series Bedienungsanleitung

Leica DM750

Manual

Leica DM 750 Manual 2

Chapter overview

Safety regulations 4

The Leica DM 750 15

Get Ready! 18

Get Set! 28

Go! 42

Care of the Microscope 44

Dimensions 47

Leica DM 750 Manual 3

Contents

Safety regulations 4

Safety concept 5

Symbols used in this operating manual 6

Important Notes 7

Instructions on use 8

Health risks and dangers of use 10

Information for the person responsible

for the instrument 11

Care instructions 12

Accessories, maintenance and repair 13

Electrical data and ambient conditions 14

The Leica DM 750 15

Introduction 16

Unpacking 17

Get Ready! 18

Substage Illumination 19

Attaching the viewing Tubes 20

Leica EZ Viewing Tube –

integrated eyepieces 21

Leica Standard Viewing Tube –

separated eyepieces 23

Eyeguards 24

Installing Objectives 25

Installing the Substage Condenser 26

Get Set! 28

Turning on the microscope 29

Complete Condenser Centration 30

Using the Condenser 32

Prepare to View a Specimen Slide 33

Focusing 34

Viewing Tube Adjustment 35

Koehler Setup 37

Koehler Setup (cont.) 38

Oil Immersion Technique 39

Time Delay Shutoﬀ 41

Go! 42

Ready! Set! Go! 43

Care of the Microscope 44

General maintenance 45

Dimensions 47

Leica DM 750 Manual 4

Safety regulations

Leica DM 750 Manual 5

Safety concept

The individual modules of the Leica DM micros-

copy series include an interactive CD-ROM with

all relevant user manuals several languages.

Keep it in a safe place, and readily accessible

to the user. User manuals and updates are also

available for you to download and print from

our web site at

www.leica-microsystems.com.

This operating manual describes the special

functions of the individual modules of the Leica

DM microscopy series and contains important

instructions for their operational safety, main-

tenance, and accessories.

The "Safety concept" booklet contains addi-

tional safety information regarding the service

work, requirements and the handling of micro-

scope, accessories and electrical accessories as

well as general safety instructions.

You can combine individual system articles with

articles from external suppliers. Please read the

user manual and the safety requirements of the

supplier.

Before installing, operating or using the instru-

ments, read the user manuals listed above. In

particular, please observe all safety instruc-

tions.

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

Leica DM 750 Manual 6

Symbols used in this operating manual

Warning of a danger

• This symbol indicates especially impor-

tant information that must be read and

complied with.

Failure to comply can cause the following:

Hazards to personnelϘ

Functional disturbances or damaged instru-Ϙ

ments

Warning of hazardous electrical voltage

This symbol indicates especially impor-

tant information that is mandatory to

read and observe.

Failure to comply can cause the following:

Hazards to personnelϘ

Functional disturbances or damagedϘ

instruments

Danger due to hot surface.

This symbol warns against touching

accessible hot surfaces, e.g. those of

light bulbs.

Important information

This symbol indicates additional infor-

mation or explanations that intend to

provide clarity.

Explanatory notes

This symbol within the text points to addi-ϐ

tional information and explanations.

Leica DM 750 Manual 7

Important Notes

Description

The Leica DM 750 microscope meets today's

state of the art of technology. Nevertheless,

hazards may still arise during operation. The

potential risks are described below.

• Before installing, operating or using the

instruments, it is required to read this

user manual. In particular, please observe all

safety instructions.

Contact address

Leica Microsystems (Switzerland) Ltd.

Industry Division

Max Schmidheiny Strasse 201

CH-9435 Heerbrugg (Switzerland)

User Manual

This user manual includes important instruc-

tions related to operating safety, maintenance

and accessories,

Your Leica DM 750 microscope comes

with an interactive CD-ROM with all

relevant user manuals. Keep it in a safe place,

and readily accessible to the user. User manu-

als and updates are also available for you

to download and print from our web site at

www.leica-microsystems.com

Accessories from third-party suppliers

You can combine individual system articles with

articles from external suppliers. Please read the

user manual and the safety requirements of the

supplier.

Original condition

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

Legal requirements

Adhere to general and local regulations relat-

ing to accident prevention and environmental

protection.

EC Declaration of Conformity

Electricallyoperatedaccessoriesareconstructed

based on the state of the art of technology and

are provided with an EC Declaration of Confor-

mity.

Leica DM 750 Manual 8

Instructions on use

Intended use

The Leica DM 750 microscope is an optical

instrument which uses magniﬁcation and illu-

mination to improve the visibility of objects. It

is used for observing and documenting.

The Leica DM 750 microscope may be used only

in closed rooms and must be placed on a solid

ﬂoor.

The Leica DM 750 microscope can be used in

clean rooms without any problems.

• Position the Leica DM 750 microscope

so that it can be disconnected from

the power supply at any time. The power cord

must remain accessible at all times, because the

power supply is foreseen as mains disconnect-

ing device.

Place of use

Only use the instruments in closed, dust free

rooms and between +10 °C and +40°C. Protect

the devices from oil, chemicals and extreme

humidity. If using the devices outdoors, protect

them from dust and moisture. Never use electri-

cal devices outdoors. Install electrical devices at

least 10 cm from the wall and away from ﬂam-

mable substances.

Avoid large temperature ﬂuctuations, direct

sunlight and vibrations. These conditions

can distort measurements and micrographic

images.

In warm and warm-damp climatic zones,

the individual components require

special care in order to prevent the build-up of

fungus.

Non-intended use

• Using the instrument in any way

contrary to the speciﬁcations in the user

manual can lead to bodily harm and damage to

objects. Doing so can impair the functions of

the protective measures provided.

Never install any other plug (NEMA

5-15P) or unscrew any mechanical

components unless expressly instructed to do

so in the instructions.

The devices and accessories described in

this operating manual have been tested

for safety and potential hazards.

Leica DM 750 Manual 9

Instructions on use (continued)

• The responsible Leica aﬃliate must be

consulted whenever the instrument is

altered, modiﬁed or used in conjunction with

non-Leica components that are outside of the

scope of this manual.

• Unauthorized alterations to the device

or noncompliant use shall void all rights

to any warranty claims.

Transport

If at all possible, use the original packaging for

shipping or transporting individual modules.

In order to prevent damage from vibrations,

disassemble all moving parts that (according to

the user manual) can be assembled and disas-

sembled by the customer and pack them sepa-

rately.

Disposal

Disposal must comply with locally applicable

laws and regulations.

Integration in third-party products

When installing Leica products into third-party

products, the manufacturer of the complete

system or its dealer is responsible for follow-

ing all applicable safety instructions, laws and

guidelines.

Leica DM 750 Manual 10

Health risks and dangers of use

Health risks

Workplaces with microscopes facilitate

and improve the viewing task, but they

also impose high demands on the eyes and

holding muscles of the user. Depending on the

duration of uninterrupted work, asthenopia

and musculoskeletal problems may occur. For

this reason, appropriate measures for reduction

of the workload must be taken:

Optimum workplace layoutϘ

Frequent changes of activityϘ

Thorough training of the personnel, givingϘ

consideration to ergonomic and organiza-

tional aspects

The ergonomic design and construction of the

Leica microscopy series are intended to reduce

the exertion of the user to a minimum.

Danger of infection

• Direct contact with eyepieces is a poten-

tial transmission method for bacterial

and viral infections of the eye.

The risk can be kept to a minimum by

using personal eyepieces for each indi-

vidual or detachable eyecups.

Dangers during use

The Leica DM 750 microscope may only beϘ

connected to a grounded socket.

The Leica DM 750 microscope may not beϘ

operated unless it is in proper functioning

condition.

LED Klasse 1 /LED 1 Laser Product

The illumination meets laser class 1 require-

ments in accordance with IEC 60825-1 "Safety

of LED products".

LED class 1

Class 1

LED Product

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Leica Mikroskop Handbücher

Leica

Leica SP5 II Bedienungsanleitung

Leica

Leica SP2 Bedienungsanleitung

Leica

Leica DMI6000B Bedienungsanleitung

Leica

Leica FL800 ULT Bedienungsanleitung

Leica

Leica SP8 Bedienungsanleitung

Leica

Leica CME Bedienungsanleitung

Leica

Leica MS5 Bedienungsanleitung

Leica

Leica DMIL Bedienungsanleitung

Leica

Leica VOH IV Bedienungsanleitung

Leica

Leica MacroFluo Bedienungsanleitung

Leica

Leica DIGILUX 1 Bedienungsanleitung

Leica

Leica DM2000 Bedienungsanleitung

Leica

Leica DM R Series Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

Leica

Leica CME Bedienungsanleitung

Leica

Leica M125 Bedienungsanleitung

Leica

Leica DM E Bedienungsanleitung

Leica

Leica M165 FC Bedienungsanleitung

Leica

Leica StereoZoom Bedienungsanleitung

Leica

Leica StereoZoom 7 Bedienungsanleitung

Leica

Leica BF200 Bedienungsanleitung

Leica

Leica FSC Bedienungsanleitung

Leica

Leica DM6B Bedienungsanleitung

Leica

Leica MATEO TL Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

AO Cycloptic Bedienungsanleitung

Celestron

Celestron 44345 Bedienungsanleitung