Leica DM500 Bedienungsanleitung

Leica DM500

User Manual

Leica DM500 User Manual 2

Published in January 2015 by:

Leica Microsystems (Schweiz) AG

Max Schmidheiny Strasse 201

CH-9435 Heerbrugg (Switzerland)

In case of questions, please contact the hotline:

[email protected]om

Manufacturer Information

Leica DM500 User Manual 3

Chapter Overview

Safety regulations 5

The Leica DM500 16

Get Ready! 19

Get Set! 26

Go! 35

Care of the Microscope 37

Dimensions 40

Leica DM500 User Manual 4

Contents

Safety Regulations

Safety Concept 6

Symbols Used in This Operating Manual 7

Important Notes 8

Instructions on Use 9

Health Risks and Dangers of Use 11

Information for the Person

Responsible for the Instrument 12

Care Instructions 13

Accessories, Maintenance and Repair 14

Electrical Data and Ambient Conditions 15

The Leica DM500

Congratulations! 17

Unpacking 18

Get Ready!

Attaching the Viewing Tubes 20

Leica EZ Viewing Tube – Integrated Eyepieces 21

Leica Standard Viewing Tube – Separated Eyepieces 23

Eyeguards 24

Installing Objectives and Substage Condenser 25

Get Set!

Turning on the Microscope 27

Using the Condenser 28

Prepare to View a Specimen Slide 29

Focusing 30

Viewing Tube Adjustment 31

Oil Immersion Technique 33

Go!

Ready! Set! Go! 36

Care of the Microscope

General Maintenance 38

Dimensions

Dimensions 41

Leica DM500 User Manual Safety Regulations 5

Safety Regulations

Leica DM500 User Manual Safety Regulations 6

Safety Concept

The individual modules of the Leica DM micros-

copy series include an interactive CD-ROM with

all relevant user manuals several languages.

Keep it in a safe place, and readily accessible

to the user. User manuals and updates are also

available for you to download and print from

our website at www.leica-microsystems.com.

This operating manual describes the special

functions of the individual modules of the

Leica DM microscopy series and contains

important instructions for their operational

safety, maintenance, and accessories.

The "Safety concept" booklet contains addi-

tional safety information regarding the service

work, requirements and the handling of micro-

scope, accessories and electrical accessories

as well as general safety instructions. You can

combine individual system articles with articles

from external suppliers. Please read the user

manual and the safety requirements of the

supplier.

Before installing, operating or using the instru-

ments, read the user manuals listed above. In

particular, please observe all safety instructions.

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

Leica DM500 User Manual Safety Regulations 7

Symbols Used in This Operating Manual

Warning of a danger

This symbol indicates especially impor-

tant information that is mandatory to

read and observe.

Failure to comply can cause the following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Warning of hazardous electrical voltage

This symbol indicates especially impor-

tant information that is mandatory to

read and observe.

Failure to comply can cause the following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Danger due to hot surface

This symbol warns against touching

accessible hot surfaces, e.g. those of

light bulbs.

Important information

This symbol indicates additional infor-

mation or explanations that intend to

provide clarity.

Explanatory notes

fThis symbol within the text points to addi-

tional information and explanations.

Instructions for disposing of the

instrument, accessory components,

and consumables.

Leica DM500 User Manual Safety Regulations 8

Important Notes

Description

The Leica DM500 microscope meets today's state

of the art of technology. Nevertheless, hazards

may still arise during operation. The potential

risks are described below.

•Before installing, operating or using the

instruments, it is required to read this

user manual. In particular, please observe all

safety instructions.

User manual

This user manual includes important instruc-

tions related to operating safety, maintenance

and accessories.

Your Leica DM500 microscope comes

with an interactive CD-ROM with all

relevant user manuals. Keep it in a safe place,

and readily accessible to the user. User manu-

als and updates are also available for you

to download and print from our website at

www.leica-microsystems.com.

Accessories from third-party suppliers

You can combine individual system articles with

articles from external suppliers. Please read the

user manual and the safety requirements of the

supplier.

Original condition

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

Legal requirements

Adhere to general and local regulations relat-

ing to accident prevention and environmental

protection.

EC Declaration of Conformity

Electrically operated accessories are

constructed based on the state of the art of

technology and are provided with an EC Decla-

ration of Conformity.

Leica DM500 User Manual Safety Regulations 9

Instructions on Use

The Leica DM500 microscope may be

used only in closed rooms and must be

placed on a solid substrate.

The Leica DM500 microscope can be used in

clean rooms without any problems.

Always position the Leica DM500 micro-

scope so that you can disconnect it from

the power supply at any time. The power cable

must remain accessible at all times, because it is

intended as a power disconnect device.

Place of use

Only use the instruments in closed, dust free

rooms and between +10°C and +40°C. Protect

the devices from oil, chemicals and extreme

humidity. If using the devices outdoors, protect

them from dust and moisture. Never use electri-

cal devices outdoors. Install electrical devices at

least 10 cm from the wall and away from ﬂam-

mable substances.

Avoid large temperature ﬂuctuations, direct

sunlight and vibrations. These conditions

can distort measurements and micrographic

images.

In warm and warm-damp climatic zones,

the individual components require

special care in order to prevent the build-up of

fungus.

Non-intended use

Never install any other plug or unscrew

any mechanical components unless

expressly instructed to do so in the instructions.

The devices and accessories described in

this instruction manual have been tested

for safety and potential hazards.

The responsible Leica aﬃliate must be

consulted whenever the instrument is

altered, modiﬁed or used in conjunction with

non-Leica components that are outside of the

scope of this manual!

Unauthorized alterations to the instru-

ment or noncompliant use shall void all

rights to any warranty claims.

Leica DM500 User Manual Safety Regulations 10

Instructions on Use (Continued)

Transport

If at all possible, use the original packaging for

shipping or transporting individual modules.

In order to prevent damage from vibrations,

disassemble all moving parts that (according to

the user manual) can be assembled and disas-

sembled by the customer and pack them sepa-

rately.

Disposal

Once the product has reached the end of its

service life, please contact Leica Service or Sales

about disposal.

Please observe and ensure compliance with the

national laws and regulations that implement,

for example, the EC Directive WEEE.

Like all electronic devices, this instru-

ment, its accessory components

and consumables must never be disposed of

with general household waste. Disposal must

comply with locally applicable laws and regula-

tions.

Integration in third-party products

When installing Leica products into third-party

products, the manufacturer of the complete

system or its dealer is responsible for follow-

ing all applicable safety instructions, laws and

guidelines.

Andere Handbücher für DM500

Inhaltsverzeichnis

Andere Leica Mikroskop Handbücher

Leica

Leica MC170 HD Bedienungsanleitung

Leica

Leica M420 Bedienungsanleitung

Leica

Leica FluoCombi III Bedienungsanleitung

Leica

Leica S4 E StereoZoom Bedienungsanleitung

Leica

Leica DMIL Bedienungsanleitung

Leica

Leica DIGILUX 1 Bedienungsanleitung

Leica

Leica M500 N Bedienungsanleitung

Leica

Leica DM100 Bedienungsanleitung

Leica

Leica DM R Series Bedienungsanleitung

Leica

Leica DM750 Bedienungsanleitung

Leica

Leica S Series Bedienungsanleitung

Leica

Leica K3C Bedienungsanleitung

Leica

Leica BM E Bedienungsanleitung

Leica

Leica TCS SP8 Benutzerhandbuch

Leica

Leica WILD M695 Bedienungsanleitung

Leica

Leica ATC 2000 Bedienungsanleitung

Leica

Leica MacroFluo Bedienungsanleitung

Leica

Leica DM3 XL Bedienungsanleitung

Leica

Leica M Bedienungsanleitung

Leica

Leica M125 Bedienungsanleitung

Leica

Leica DI C800 Handbuch

Leica

Leica M525 OH4 Bedienungsanleitung

Leica

Leica TCS SP5 X Bedienungsanleitung

Leica

Leica SP5C Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

AO Cycloptic Bedienungsanleitung

Celestron

Celestron 44345 Bedienungsanleitung