Leica EZ4 E Bedienungsanleitung

Leica ES2

Leica EZ4

Leica EZ4 E

Leica EZ4 W

User Manual

Leica E Series User Manual 2

Congratulations!

You have just purchased a Leica E Series stereo

microscope – an excellent choice! Viewing

entire objects under magniﬁcation imparts

perspectives and discoveries that would not be

possible with the naked eye.

In developing our stereo microscopes, we have

placed great emphasis on simple, self-explana-

tory operation. However, please take the time

to read the instruction manual and the notes on

operating safety, to learn about all the features

and capabilities of your instrument so that

you can use it safely and to its best advantage.

Should you have any questions, please consult

your local Leica representative. We are gladly at

your service!

Leica E Series User Manual 3

Chapter Overview

Safety and Use 6

Leica ES2 14

Leica EZ4, Leica EZ4 E or Leica EZ4 W 22

Eyepieces (Only for Leica EZ4) 33

Photography Using the Leica EZ4 E or Leica EZ4 W 41

Get Set! 47

The Camera Remote Control (Optional) 55

Care, Transport, Contact Persons 68

Speciﬁcations 70

Dimensions 74

Leica E Series User Manual 4

Congratulations! 2

Chapter Overview 3

Contents 4

Safety and Use

Symbols Used 7

Safety Instructions 8

Regulatory Compliance Information (Regarding Leica EZ4 W Only) 10

Instructions for Use 12

Leica ES2

Overview: Leica ES2 15

Transport, Placement and Storage 16

The Correct Interpupillary Distance 17

Using the LED Illuminator 18

Focusing 19

Magniﬁcation Display 20

Adjusting the Resistance of the Focus Drive 21

Leica EZ4, Leica EZ4 E or Leica EZ4 W 22

Overview: Leica EZ4 23

Instrument Variant: Leica EZ4 E or Leica EZ4 W 24

Transport, Placement and Storage 25

Contents

The Correct Interpupillary Distance 26

Switching on the LED Illuminator 27

Controlling the Automatic Shutoﬀ 28

Illumination Types 29

Focusing 30

Magniﬁcation Display 31

Adjusting the Resistance of the Focus Drive 32

Eyepieces (Only for Leica EZ4)

Changing Eyepieces (Only for Leica EZ4, Open Version) 34

Eyepieces and Eyecups (Only for Leica EZ4, Open Version) 35

Dioptric Correction (Only for Leica EZ4, Open Version) 36

Graticules (Only for Leica EZ4, Open Version) 38

Graticules: Preparation 39

Inserting the Graticules 40

Photography Using the Leica EZ4 E or Leica EZ4 W

Introduction 42

The Basics 43

Leica EZ4 E or Leica EZ4 W: Overview 44

Unpacking 46

Leica E Series User Manual 5

Contents (Continued)

Get Set!

USB Mode – Capturing and Adjusting Images Using a Computer 48

SD Mode – Capturing Images Without a Computer or Without a Wireless

Device 50

Adjusting Settings While in SD Mode 52

WiFi Mode – Capturing and Adjusting Images Using a Wireless Device

(Only Available for Leica EZ4 W) 53

Ethernet Mode – Capturing and Adjusting Images Using a Network 54

The Camera Remote Control (Optional)

Optional Remote Control 56

Viewing Images and Movies With the Optional Remote Control 57

Calling up the Camera Menu 58

COLOR (Automatic White Balance) 59

COLOR (Manual White Balance) 60

EXPOSURE 61

RESOLUTION 62

SETUP CAMERA (Camera Settings) 63

SETUP USER 64

SETUP ETHERNET 65

SETUP WiFi (Only for Leica EZ4 W) 66

Pairing Cameras With Remotes 67

Care, Transport, Contact Persons

Care, Transport, Contact Persons 69

Speciﬁcations

Speciﬁcations 71

Speciﬁcations (Only for Leica EZ4 W) 72

Certiﬁcates (Only for Leica EZ4 W) 73

Dimensions

Leica ES2 75

Leica EZ4 E or Leica EZ4 W 77

Leica EZ4, 10× Eyepieces 79

Leica EZ4 Without Eyepieces 81

Leica E Series User Manual Safety and Use 6

Safety and Use

Leica E Series User Manual Safety and Use 7

Symbols Used

Read and understand user manual

before using this device.

Warning of a danger

•This symbol indicates especially impor-

tant information that must be read and

complied with. Failure to comply can cause the

following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Warning of hazardous electrical voltage

This symbol indicates especially impor-

tant information that, if not observed,

can cause the following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Danger due to hot surface

This symbol warns against touching hot

surfaces, e.g. those of light bulbs.

Important information

This symbol indicates additional infor-

mation or explanations that intend to

provide clarity.

Leica E Series User Manual Safety and Use 8

Before installing, operating or using the

instrument, it is mandatory to read this

user manual. In particular, please observe all

safety instructions.

The "Safety Concept" booklet contains addi-

tional safety information regarding service

work, requirements and the handling of the

microscope, accessories as well as general

safety instructions.

You can combine individual system articles with

articles from external suppliers. Please read the

user manual and the safety requirements of the

supplier.

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

Warning of a danger

This symbol indicates especially impor-

tant information that is mandatory

to read and observe. Failure to follow these

instructions may pose hazards to personnel,

cause instrument malfunctions or damage the

instrument.

Hazardous electrical voltage

This symbol indicates especially impor-

tant information that is mandatory

to read and observe. Failure to follow these

instructions may pose hazards to personnel,

cause instrument malfunctions or damage the

instrument.

Important information

This symbol indicates additional infor-

mation or explanations that intend to

provide clarity.

EC Declaration of Conformity

Electrically operated accessories are

constructed based on the state of the art of

technology and are provided with an EC Decla-

ration of Conformity.

Technical safety

To connect the Leica E Series microscopes to

power, use a power cable that meets the power

cable speciﬁcations in your country. The power

socket used has to be equipped with a 16 A or

10 A fuse. Only connect the instrument to a

grounded power socket that has been installed

according to regulations. The power supply

voltage has to correspond to the voltage speci-

ﬁed on the identiﬁcation label. Make sure that

the ground connection is neither defective

nor interrupted, since otherwise a malfunction

poses a risk of fatal injury. Never unplug the

power plug with moist or wet hands. There is

danger of an electric shock.

Safety Instructions

Leica E Series User Manual Safety and Use 9

Safety Instructions (Continued)

Instrument safety and EMC

Our device has been designed, produced and

tested in compliance with

OIEC EN 61010-1: Electrical equipment for

measurement, control and laboratory use

– Safety – Part one: general requirements

OEN 60950-1: Information technology equip-

ment – Safety – Part one: general require-

ments

ORadio interference suppression in compli-

ance with EN 55011 class B

ONoise immunity in compliance with

DIN EN 61326-1.

The device meets the requirements of EU

directives

O2014/35/EU Low voltage directive

O2014/30/EU EMC directive

O2011/65/EU RoHS directive

and carries the CE mark.

The device must be disposed of in

accordance with 2012/19/EU WEEE

directive.

Intended for indoor use only in all EU member

states, EFTA states and Switzerland.

Leica EZ4 W

OEN 300328: Electromagnetic compatibility

and Radio spectrum Matters (ERM); Wide-

band transmission systems; Data transmis-

sion equipment operating in the 2.4 GHz

ISM band and using wide band modulation

techniques; Harmonized EN covering essen-

tial requirements under article 3.2 of the

RED directive.

Leica E Series User Manual Safety and Use 10

Regulatory Compliance Information (Regarding Leica EZ4 W Only)

FCC Requirements for Operation in the United States

FCC radio frequency interference warnings

and instructions

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reason-

able protection against harmful interference

in a residential installation. This equipment

generates, uses and can radiate radio frequency

energy and, if not installed and used in accor-

dance with the instructions, may cause harm-

ful interference to radio communications.

However, there is no guarantee that interfer-

ence will not occur in a particular installation.

If this equipment does cause harmful interfer-

ence to radio or television reception, which can

be determined by turning the equipment oﬀ

and on, the user is encouraged to try to correct

the interference by one or more of the follow-

ing measures:

OReorient or relocate the receiving antenna.

OIncrease the separation between the equip-

ment and receiver.

OConnect the equipment into an outlet on

a circuit diﬀerent from that to which the

receiver is connected.

OConsult the dealer or an experienced radio/

TV technician for help.

FCC information to user

This product does not contain any user service-

able components and is to be used with

approved antennas only.

Any product changes or modiﬁcations will

invalidate all applicable regulatory certiﬁca-

tions and approvals.

FCC guidelines for human exposure

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be

installed and operated with minimum distance

of 20 cm between the radiator and your body.

This transmitter must not be co-located or oper-

ating in conjunction with any other antenna or

transmitter.

FCC caution

OAny changes or modiﬁcations not expressly

approved by the party responsible for

compliance could void the user's authority

to operate this equipment.

OThis device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and

(2) this device must accept any interference

received, including interference that may

cause undesired operation.

OThis device and its antenna(s) must not be

co-located or operation in conjunction with

any other antenna or transmitter.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Leica Mikroskop Handbücher

Leica

Leica DM1000 LED Bedienungsanleitung

Leica

Leica PROVEO 8 Bedienungsanleitung

Leica

Leica M Bedienungsanleitung

Leica

Leica SP8 Bedienungsanleitung

Leica

Leica DVM6 Bedienungsanleitung

Leica

Leica Z6 APO Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung

Leica

Leica A60 F Bedienungsanleitung

Leica

Leica BF200 Bedienungsanleitung

Leica

Leica MacroFluo Bedienungsanleitung

Leica

Leica DMi8 Bedienungsanleitung

Leica

Leica DM4000B Bedienungsanleitung

Leica

Leica EZ4 Bedienungsanleitung

Leica

Leica DM2000 Bedienungsanleitung

Leica

Leica Stellaris 8 FALCON Installationsanleitung

Leica

Leica EZ5 Bedienungsanleitung

Leica

Leica DMIRE2 Bedienungsanleitung

Leica

Leica DMi1 Handbuch

Leica

Leica BF200 Bedienungsanleitung

Leica

Leica DM1000 LED Handbuch

Leica

Leica Stellaris 5 Bedienungsanleitung

Leica

Leica SP5C Bedienungsanleitung

Leica

Leica BM E Bedienungsanleitung

Leica

Leica BM E Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

AO Cycloptic Bedienungsanleitung

Celestron

Celestron 44345 Bedienungsanleitung