Metra Electronics 99-7500 Bedienungsanleitung

99-7500

DW-7501

INSTALLATION

INSTRUCTIONS

TOOLS REQUIRED

Cutting tool

Phillips screwdriver

Socket wrench

KIT COMPONENTS

rev. 300801

Radio

Housing #1

Radio

Housing #2

Trimplate

Bracket Set #1

(6) 3/8" Hex-head Screws

(6) ¾" Hex-head Screws

(4) ½" Hex-head

Screws

(8) 3/8" Phillips

Screws

Filler Bar

Equalizer

Dummy

Plate

APPLICATIONS

CAR PAGE

MAZDA

323 1986-89*...............................................................................1

323 1990-94*...............................................................................1

626 (models w/factory receiver/tape deck/eq/pocket) 1986-92....2

626 (models w/factory receiver/pocket) 1986-92* ......................2

929 1988-91.................................................................................3

B-Series Pickup 1986-93................................................................3

Miata 1990-99..............................................................................4

MPV 1989-95*.............................................................................. 4

MX6 (models w/factory receiver/tape deck/eq/pocket) 1986-92...2

MX6 (models w/factory receiver/pocket) 1986-92*....................... 2

Protege 1990-94*......................................................................... 1

RX-7 1986-91............................................................................... 5

* For aftermarket DIN head unit installations, order Metra's 99-7501

For models with pockets 3¾" or taller, order Metra's 99-7501

INST 7500

B-SERIES PICKUP: Re-connect the battery terminal and test the unit for proper operation.

Mount Bracket Set #1 to the Housing with (4) ½" Hex-head Screws supplied. Mount the

head unit/kit assembly to the back of the dash trim bezel with (4) screws removed in step #1

and re-attach the bezel. (see Fig. A)

323 1986-89, 626 / MX6 (models using Radio Housing #2): Re-connect the battery terminal

and test the unit for proper operation. Mount the head unit/kit assembly to the back of the dash

trim bezel with (4) 3/8" Phillips Screws supplied and re-attach the bezel. (see Fig. B)

626 / MX6 (models using Radio Housing #1: Re-connect the battery terminal and test the

unit for proper operation. Mount the head unit/kit assembly to the back of the dash trim bezel

with (8) 3/8" Phillips Screws supplied and re-attach the bezel. (see Fig. C)

323 1990-94, MPV, PROTEGE: Re-connect the battery terminal and test the unit for proper

operation. Mount the head unit/kit assembly to the sub-dash with (4) ¾" Hex-head Screws

supplied. (see Fig. D)

929, MIATA, RX-7: Re-connect the battery terminal and test the unit for proper operation.

Mount the head unit/kit assembly to the back of the dash trim bezel with (6) 3/8" Hex-head

Screws supplied and re-attach the bezel. (see Fig. E)

Fig. B

Fig. D

Fig. E

Fig. C

Fig. A

1-800-221-0932 www.metraonline.com

Disconnect the negative battery terminal to

prevent an accidental short circuit. Remove

the ashtray and (2) screws exposed in the

ashtray cavity. Unclip the radio trim bezel

and disconnect the wiring. Remove (4)

screws securing the factory dummy plate to

the back of the bezel and discard the plate.

MAZDA 323 1986-89

Cut and remove all mounting tabs on Radio

Housing #2 EXCEPT tabs "E". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instructions for ALL

VEHICLES on Page #5.

"E" "E"

Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adaptor and making

connections as shown. (Isolate and

individually tape off the ends of any

unused wires to prevent electrical short

circuit).

A) Strip wire ends back ½"

B) Twist ends together

C) Solder

D) Tape

Disconnect the negative battery terminal to

prevent an accidental short circuit. Gently

pry out on the radio trim bezel and remove.

Remove (4) screws securing the factory

head unit and disconnect the wiring.

MAZDA 323 / Protege 1990-94

Cut and remove all mounting tabs on Radio

Housing #2 EXCEPT tabs "D". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instruc-tions for ALL

VEHICLES on Page #5.

"D"

IF AN EQUALIZER WILL BE INCLUDED: Slide

the aftermarket equalizer into the back of the

Radio Housing. Using the hardware included

with the equalizer, mount the unit to the kit. (see

Fig. A)

IF AN EQUALIZER WILL NOT BE INCLUDED:

Snap the Equalizer Dummy Plate into the Radio

Housing. (see Fig. B)

DIN HEAD UNITS: For models using Radio Housing #1, cut and remove the shaft supports.

Slide the DIN cage into the Housing and secure by bending the metal locking tabs down. Slide

the aftermarket head unit into the cage until secure. (see Fig. A)

Fig. A

Fig. B

Disconnect the negative battery terminal to

prevent an accidental short circuit. Remove

the ashtray and (2) screws exposed.

Remove the pocket and (2) screws exposed.

Remove the radio trim bezel and disconnect

the wiring. Remove (4) screws securing the

factory dummy plate to the back of the bezel

and discard the plate.

MAZDA 626 / MX6 1986-92

(models equipped with factory receiver/pocket)

Cut and remove all mounting tabs on Radio

Housing #2 EXCEPT tabs "E". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instructions for ALL

VEHICLES on Page #5.

"E" "E"

Disconnect the negative battery terminal to

prevent an accidental short circuit. Remove

the ashtray and (2) screws exposed in the

ashtray cavity. Unsnap the gear shifter trim

and remove (2) screws exposed. Unsnap

the climate control trim bezel and remove (2)

screws exposed. Remove the dash trim

bezel and disconnect the wiring. Remove

(4) screws securing the factory head unit

and disconnect the wiring.

MAZDA RX-7 1986-91

Cut and remove all mounting tabs on Radio

Housing #1 EXCEPT tabs "A". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instructions for ALL

VEHICLES on Page #5.

"A"

Disconnect the negative battery terminal to

prevent an accidental short circuit. Remove

the ashtray and (2) screws exposed.

Remove the pocket and (2) screws exposed.

Remove the radio trim bezel and disconnect

the wiring. Remove (4) screws securing the

factory dummy plate to the back of the bezel

and discard the plate.

MAZDA 626 / MX6 1986-92

(models equipped with factory receiver/tape deck/eq/pocket)

Cut and remove all mounting tabs on Radio

Housing #1 EXCEPT tabs "B". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instructions for ALL

VEHICLES on Page #5.

"B"

2-SHAFT HEAD UNITS: For models using Radio Housing #1, attach the Faceplate to the

Housing. Slide the aftermarket head unit into the kit and secure with shaft nuts. (see Fig. A).

For models using Radio Housing #2, slide the aftermarket head unit into the kit and secure

with shaft nuts. (see Fig. B)

ALL VEHICLES

Fig. B

Fig. A

Cut and remove all mounting tabs on Radio

Housing #1 EXCEPT tabs "C". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instructions for ALL

VEHICLES on Page #5.

Disconnect the negative battery terminal to

prevent an accidental short circuit. Remove

(2) screws from each side of the radio trim

bezel. Remove the ashtray and (1) screw

from the rear support tab. Remove the radio

trim bezel/sub-bracket assembly. Remove

(4) screws securing the sub-bracket to the

back of the radio trim bezel. Loosen (2)

screws on top of the bezel and remove the

sub-bracket from the bezel.

MAZDA B-Series Pickup 1986-93

"C"

"A"

Cut and remove all mounting tabs on Radio

Housing #1 EXCEPT tabs "A". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instructions for ALL

VEHICLES on Page #5.

Disconnect the negative battery terminal to

prevent an accidental short circuit. Reach

behind the console and remove (2) nuts

supporting the head unit carrier. Remove

the factory head unit and disconnect the

wiring..

MAZDA 929 1988-91

Cut and remove all mounting tabs on Radio

Housing #1 EXCEPT tabs "A". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instructions for ALL

VEHICLES on Page #5.

Disconnect the negative battery terminal to

prevent an accidental short circuit. Remove

(2) screws from the center console storage

compartment. Remove (1) screw under the

ashtray. Remove (1) screw from each side

of the center console panel and remove the

panel. Remove (1) screw exposed at the

base of the dash trim bezel. Pop out the a/c

vents and remove (2) screws exposed.

Remove the dash trim bezel.

MAZDA Miata 1990-99

"A"

Cut and remove all mounting tabs on Radio

Housing #2 EXCEPT tabs "E". The

mounting tabs can be identified by the

stamped letter on the back of each tab. Skip

to the Installation Instructions for ALL

VEHICLES on Page #5.

Disconnect the negative battery terminal to

prevent an accidental short circuit. Remove

the ashtray and (2) screws exposed in the

ashtray cavity. Remove the radio trim bezel

and disconnect the wiring. Remove (4)

screws securing the factory head unit and

disconnect the wiring.

MAZDA MPV 1989-95

"E" "E"

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Metra Electronics Autozubehör Handbücher

Metra Electronics

Metra Electronics 99-7952 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7502 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7609G Bedienungsanleitung

Metra Electronics

Metra Electronics DODGE 99-6540 Bedienungsanleitung

Metra Electronics

Metra Electronics 107-MZ1B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-4644 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-6536 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7310 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8157B Bedienungsanleitung

Metra Electronics

Metra Electronics 95-7417 Bedienungsanleitung

Metra Electronics

Metra Electronics 95-9313B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-2005 Bedienungsanleitung

Metra Electronics

Metra Electronics AW-333GM Bedienungsanleitung

Metra Electronics

Metra Electronics AFDI-RSE-01 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7365B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-3107S Bedienungsanleitung

Metra Electronics

Metra Electronics 2004-2006 Chrysler Pacifica Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7006 Bedienungsanleitung

Metra Electronics

Metra Electronics 108-TO7HG Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7610B Bedienungsanleitung

Metra Electronics

Metra Electronics 95-7951 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-9223 Bedienungsanleitung

Metra Electronics

Metra Electronics OESWC-1761-RF Bedienungsanleitung

Metra Electronics

Metra Electronics ACURA 99-7866 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung