Metrohm 810 Bedienungsanleitung

810 Sample Processor

Manual

8.810.8001EN / 2019-12-06

Metrohm AG

CH-9100 Herisau

Switzerland

Phone +41 71 353 85 85

Fax +41 71 353 89 01

[email protected]

www.metrohm.com

810 Sample Processor

Manual

8.810.8001EN / 2019-12-06

Technical Communication

Metrohm AG

CH-9100 Herisau

[email protected]

This documentation has been prepared with great care. However, errors

can never be entirely ruled out. Please send comments regarding possible

errors to the address above.

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of contents

810 Sample Processor ￭￭￭￭￭￭￭￭ III

Table of contents

1 Introduction 1

1.1 The 810 Sample Processor with operating instru-

ments ..................................................................................... 1

1.2 Instrument description ......................................................... 2

1.2.1 Instrument components ........................................................... 3

1.2.2 Intended use ........................................................................... 3

1.3 About the documentation ................................................... 3

1.3.1 Symbols and conventions ........................................................ 4

1.4 Safety instructions ................................................................ 5

1.4.1 General notes on safety ........................................................... 5

1.4.2 Electrical safety ........................................................................ 5

1.4.3 Tubing and capillary connections ............................................. 6

1.4.4 Personnel safety ....................................................................... 6

1.4.5 Flammable solvents and chemicals ........................................... 7

1.4.6 Recycling and disposal ............................................................. 7

2 Overview of the instrument 9

2.1 Front and rear ....................................................................... 9

2.2 Back panel ........................................................................... 11

2.3 Sample racks ....................................................................... 11

3 Installation 13

3.1 Setting up the instrument .................................................. 13

3.1.1 Packaging .............................................................................. 13

3.1.2 Checks .................................................................................. 13

3.1.3 Location ................................................................................ 13

3.2 Connecting the instrument to the power grid ................. 13

3.3 Connecting an operating instrument ................................ 14

3.4 Installing the rinsing and aspiration equipment .............. 15

3.5 Guide chain for cables and tubing .................................... 16

3.6 Installing the titration head ............................................... 17

3.7 Connecting an external pump ........................................... 22

3.8 Connecting MSB devices .................................................... 23

3.8.1 Connecting a dosing device ................................................... 24

3.8.2 Connecting a stirrer or titration stand .................................... 25

3.8.3 Connecting a Remote Box ..................................................... 26

3.9 Connecting USB devices ..................................................... 27

3.9.1 Connecting a barcode reader ................................................. 27

Table of contents ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

IV ￭￭￭￭￭￭￭￭ 810 Sample Processor

3.10 Mounting the drip pan ....................................................... 28

3.11 Attaching a sample rack .................................................... 29

3.12 Mounting the safety shield ................................................ 29

4 Maintenance 31

5 Troubleshooting 32

5.1 Sample Processor ............................................................... 32

5.2 Robotic arm ......................................................................... 32

5.3 Pump .................................................................................... 33

6 Appendix 34

6.1 Beaker sensor ..................................................................... 34

6.2 Rinsing nozzles ................................................................... 34

6.3 Remote interface ................................................................ 35

6.3.1 Pin assignment of the remote interfaces ................................ 36

7 Technical specifications 38

7.1 Lift and turntable ............................................................... 38

7.2 Membrane pump with valve .............................................. 38

7.3 Interfaces and connectors ................................................. 38

7.4 Power connection ............................................................... 39

7.5 Ambient temperature ......................................................... 39

7.6 Reference conditions .......................................................... 39

7.7 Dimensions .......................................................................... 39

8 Accessories 40

Index 41

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Table of figures

810 Sample Processor ￭￭￭￭￭￭￭￭ V

Table of figures

Figure 1 A complete system consisting of operating instrument with 810 Sam-

ple Processor ..................................................................................... 1

Figure 2 810 Sample Processor Front .............................................................. 9

Figure 3 810 Sample Processor rear .............................................................. 10

Figure 4 Connector strip ............................................................................... 11

Figure 5 Sample rack 6.2041.470 ................................................................. 11

Figure 6 Mounting the rinsing and aspiration tubings .................................... 15

Figure 7 Mounting the titration head ............................................................ 17

Figure 8 Installing accessories for the titration ............................................... 18

Figure 9 Connecting the tubings ................................................................... 19

Figure 10 Rod stirrer 802 Stirrer ...................................................................... 20

Figure 11 Magnetic stirrer 741 Stirrer .............................................................. 20

Figure 12 Connecting a stirrer to the tower ..................................................... 20

Figure 13 Inserting the rod stirrer .................................................................... 21

Figure 14 Connecting a pump ......................................................................... 22

Figure 15 MSB connections ............................................................................ 23

Figure 16 Connecting a dosing device ............................................................. 25

Figure 17 Connecting an MSB stirrer ............................................................... 25

Figure 18 Connecting the rod stirrer to the titration stand ............................... 26

Figure 19 Connecting the Remote Box ............................................................ 26

Figure 20 USB connectors ............................................................................... 27

Figure 21 Installing the drip pan ...................................................................... 28

Figure 22 Mounting the safety shield .............................................................. 30

Figure 23 Beaker sensor on the tower ............................................................. 34

Figure 24 Spray nozzles - Mode of operation .................................................. 35

Figure 25 Connectors of the Remote Box ........................................................ 35

Figure 26 Pin assignment of remote socket and remote plug ........................... 36

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 1 Introduction

810 Sample Processor ￭￭￭￭￭￭￭￭ 1

1 Introduction

1.1 The 810 Sample Processor with operating instru-

ments

The 810 Sample Processor is a sample changer for the following operating

instruments :

￭915 KF Ti-Touch

￭916 Ti-Touch

Operation is carried out by an operating instrument with a corresponding

software.

A complete system consisting of one of the above mentioned operating

instruments with the 810 Sample Processor can contain numerous, differ-

ent kinds of instruments. The following figure provides an overview of the

peripheral devices you can connect to the 810 Sample Processor.

Status

805

MSB

USB

5 6 7 9

Figure 1 A complete system consisting of operating instrument with

810 Sample Processor

1Printer 2PC keyboard

3Barcode reader 4USB hub

5Balance 6Stirrer

7Ti Stand 8Dosino

1.2 Instrument description ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

2￭￭￭￭￭￭￭￭ 810 Sample Processor

9Dosimat 10 Remote Box

11 Relay Box 12 Operating instrument

13 810 Sample Processor 14 USB RS adapter

(6.2148.050)

NOTICE

It is possible to connect one 810 Sample Processor per operating instru-

ment.

Updating the device software is described in the manual of the operating

instrument.

1.2 Instrument description

The 810 Sample Processor is a versatile instrument. It has been designed

exclusively for usage in factories and laboratories and it covers a wide

range of applications.

The versatile communication options of the complete system (Remote

Box, USB or LAN link etc.) can thus all be used. Thanks to these abilities,

the 810 Sample Processor is predetermined for all kinds of automation

tasks in a modern laboratory, especially for highly integrated laboratory

data systems.

The user interface of the operating instrument guarantees comfortable

operation and programming of the 810 Sample Processor. In this way, the

comprehensive range of commands and the various configuration possibil-

ities can be used comfortably and efficiently. The integration into the

entire system also guarantees a 100% conformity of the complete auto-

mation system with the FDA regulations (Food and Drug Administration),

especially with the regulation 21 CFR part 11, electronic records and sig-

natures.

There are exchangeable standard sample racks available for many vessel

dimensions. Freely selectable special beaker positions can be defined for

e.g. rinsing or conditioning beakers on every rack.

Customer-specific special racks for individual requirements can be fabrica-

ted upon request.

Inhaltsverzeichnis

Andere Metrohm Laborausrüstung Handbücher

Metrohm

Metrohm 889 Bedienungsanleitung

Metrohm

Metrohm 940 Professional IC Vario TWO Bedienungsanleitung

Metrohm

Metrohm 882 Compact IC plus Bedienungsanleitung

Metrohm

Metrohm 930 Compact IC Flex ChS Bedienungsanleitung

Metrohm

Metrohm 940 Professional IC Vario ONE/SeS/PP/MB Bedienungsanleitung

Metrohm

Metrohm 760 Bedienungsanleitung

Metrohm

Metrohm 930 Compact IC Flex Bedienungsanleitung

Metrohm

Metrohm 905 Titrando Bedienungsanleitung

Metrohm

Metrohm 785 DMP Titrino Bedienungsanleitung

Metrohm

Metrohm 856 Bedienungsanleitung

Metrohm

Metrohm 843 Pump Station Bedienungsanleitung

Metrohm

Metrohm 930 Compact IC Flex Bedienungsanleitung

Metrohm

Metrohm Eco Titrator Bedienungsanleitung

Metrohm

Metrohm 941 Bedienungsanleitung

Metrohm

Metrohm 799 GPT Titrino Bedienungsanleitung

Metrohm

Metrohm 940 Professional IC Vario ONE/LPG Bedienungsanleitung

Metrohm

Metrohm 904 Titrando Bedienungsanleitung

Metrohm

Metrohm 870 KF Titrino plus Betriebsanleitung

Metrohm

Metrohm 776 Dosimat Bedienungsanleitung

Metrohm

Metrohm 6.2841.120 Bedienungsanleitung

Metrohm

Metrohm 930 Compact IC Flex Oven/ChS Bedienungsanleitung

Metrohm

Metrohm ProfIC Vario 6 Anion Bedienungsanleitung

Metrohm

Metrohm 807 Bedienungsanleitung

Metrohm

Metrohm 940 Professional IC Vario ONE/ChS/LPG Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung