Morphy Richards SuperVac 732102 Bedienungsanleitung

www.morphyrichards.co.uk/blog

For competitions, product hints and tips

and more join us at www.facebook.com/morphyrichardsuk

@loveyourmorphy

CHARGE THE PRODUCT FULLY BEFORE FIRST USE

VC732102 MUK Rev1

* Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)

2-in-1 Cordless Bagless Upright Vacuum Cleaner

www.morphyrichards.co.uk/blog

For competitions, product hints and tips

and more join us at

Please read and keep these instructions for future use

www.facebook.com/morphyrichardsuk

@loveyourmorphy

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 1

Health and Safety

•WARNING: Whenever the cleaner is in use, due to

the risk of entrapment in rotating parts, keep

loose clothing, hair, fingers etc. away from the

brush bar, nozzle and any handheld accessories.

•WARNING: Disconnect from the mains supply

and remove the handheld vacuum cleaner (10)

before carrying out any routine maintenance,

such as cleaning any blockages, changing any

filters or accessing the motorised floor brush.

•This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities, or lack of experience

and knowledge, if they have been given supervision

or instruction concerning the use of the appliance in

a safe way and understand the hazards involved.

•Only use the mains adaptor supplied with the unit.

•Children shall not play with the appliance.

•Cleaning and user maintenance shall not be

undertaken by children without supervision.

Personal safety

• WARNING: Only lift the product by the handle (1) and

never pick the cleaner up by the motorised floor

brush.

• WARNING: isuse of the appliance could cause

personal injury.

•To prevent accidental contact with the rotating brush,

always remove the handheld unit before fitting, removing

or cleaning the motorised floor brush (21).

•Never use in the presence of explosive liquid or vapours.

•Never pick up inflammable or poisonous liquids such as

petrol, copier toner or other volatile substances. Never

pick up acids, asbestos or asbestos dust.

•Never touch the adaptor, product or cable with wet

hands.

•Unprofessional repairs can be dangerous for users.

•To protect against fire, electric shock and personal injury,

do not immerse cord, mains adaptor or cleaner in water

or other liquid.

•The appliance must never be left running unsupervised.

Location

•Do not use or keep this product outside.

•Do not store the appliance near hot surfaces eg. ovens or

heating appliances.

Product safety

•This appliance is not intended for liquid/wet pick up.

•Never use the appliance without the filter being installed.

•Never use the appliance to vacuum hot ashes, broken

glass, sharp objects or liquids.

•Never modify the cleaner in any way.

•Use only Morphy Richards spare parts and accessories.

Electrical requirements

•Check that the voltage on the rating plate of the mains

adaptor corresponds with your house electricity supply

which must be A.C. (Alternating Current).

•The battery is not a serviceable item. Remove at the end

of the product’s life for recycling.

The use of any electrical appliance requires the following common sense safety rules.

Please read these instructions carefully before using the product.

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 2

Health and safety ........................................................................

Electrical requirements ..............................................................

Product overview / Features ......................................................

Charging / storage mount fixing ...............................................

Dual functionality ........................................................................

Upright vacuuming: assembly ...................................................

Upright vacuum cleaning ...........................................................

Handheld vacuum cleaning .......................................................

Using the attachments on the handheld vacuum cleaner ......

Tool storage .................................................................................

aintenance ................................................................................

aintenance - emptying the dust canister ..............................

aintenance - filters ..................................................................

aintenance - motorised floor brush .......................................

aintenance - trouble shooting ................................................

Storage ........................................................................................

Disposal .......................................................................................

Notes ............................................................................................

Guarantee ....................................................................................

Contents

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 3

Features

(1) Upright handle

(2) Upright on/off button

(3) Power selector button

(4) Crevice tool

(5) Dusting brush

(6) Charging / storage mount

(7) Storage hook

(8) Upright handle release dial

(9) Handheld vacuum cleaner

handle

(10) Handheld vacuum cleaner

(11) Main vacuum cleaner body

(12) Handheld vacuum cleaner

release button

(13) Mains adaptor

(

13a

)Mains adaptor connector

(14) Charging inlet

(15) Handheld vacuum cleaner

on/off button

(16) Charging / power indicator

light

(17) Dust canister

(18) Dust canister filter holder

assembly

(19) Dust canister release

buttons (on either side of

the dust canister)

(20) Floor brush release button

(21) Motorised floor brush

(22) Floorhead lights

Product overview

1312

713 a

13 a

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 4

Floor

vacuum

cleaning

Handheld

vacuum

cleaning

Dual functionality

Your vacuum cleaner can easily be configured

into two different cleaning modes:

•Upright vacuum cleaner for floors and carpets.

•Handheld vacuum cleaner (10) which can be

carried with you whilst cleaning hard to reach

places.

Charging / storage mount fixing

25.4mm

the ground

762mm - This is the minimum height

above the ground for wall

mounting, it may be

mounted higher if required.

NOTE: The mounting

must be within 1.5 metres

of a mains outlet socket

to enable the mains

adaptor to reach.

During unpacking of the product, make sure that

the packing insulation piece between the handheld

vacuum cleaner (10) and the main vacuum cleaner

body (11) is removed.

Charge the product fully before first use.

1The charging / storage mount (6) must be fixed to

a suitable wall with three 4mm (No. 8) pan-head

screws (NOT PROVIDED). The screws and plug

must be suitable for the relevant wall type and be

capable of supporting a minimum of 5kg.

The position of the three holes for the fixing plugs

should be as shown in the diagram (see left).

After the charging / storage mount has been fixed

to the wall, fit the storage hook (7) to the rear of the

upright handle (1) by locating in the slot provided

and then lifting up until it clicks into position.

To fit the vacuum cleaner onto the charging /

storage mount, simply hook the product onto the

mount using the storage hook.

2To charge, plug the mains adaptor (13) into the

mains supply and switch on, then plug the mains

adaptor connector (13a) into the charging inlet (14)

on the underside of the handheld vacuum cleaner

(10), this is accessible through a hole in the back

of the main vacuum cleaner body (11).

Then hook the vacuum cleaner onto the wall

mounted charging / storage mount whilst charging.

3The four charging/power indicator lights (16) will

illuminate one by one from the lowest light to the

uppermost light in a continuous loop to indicate

the product is charging.

As charging continues, each light from the lowest

to the uppermost will remain constantly illuminated

one-by-one to indicate how much the unit has

charged. All lights will extinguish when the product

is fully charged. A full charge may take 5 hours.

When fully charged, unplug the mains adaptor

connector and switch off / unplug the mains

adaptor from the mains supply.

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 5

Upright vacuum cleaning

Turn the product on by pressing the upright

on/off button (2).

When the product is turned on, the handheld

vacuum cleaner power indicator light (16) will

illuminate blue and the floorhead lights (22) will

illuminate.

NOTE: When the battery reduces to a pre-set

level the product will stop, the light will

extinguish and the product must be recharged.

Two power settings are provided. When

switched on, the unit will automatically start at

high power. By pressing the power selector

button (3) once, the power will drop to low.

Press the button a second time to switch the

power back to high (see diagram 2, above right).

Further presses of the power selector button will

toggle the power between low and high.

Using the product on low power will be sufficient

for light cleaning and will extend the running time

until the product needs to be recharged.

You can also turn the product on with the

handheld vacuum cleaner on/off button (15).

Switching the power on using this button will not

run the rotating brush bar in the motorised floor

brush (21).

NOTE: There are no variable power settings on

the handheld vacuum cleaner (10).

Upright vacuuming: assembly

1Swing the upright handle (1) on the main vacuum

cleaner upwards until it clicks into place in an

upright position.

2Place the motorised floor brush (21) on a level

surface and align the connector on the neck of

the motorised floor brush with the connector hole

on the base of the main vacuum cleaner body

(11).

Holding the neck of the motorised floor brush in

place, lower the main vacuum cleaner body onto

the motorised floor brush until you hear the two

pieces click into place.

When attaching the motorised floor brush, ensure

that the latching mechanism is fully locked in

place to ensure electrical connection is made.

3Fit the handheld vacuum cleaner (10) into the

cavity on the main vacuum cleaner body by firstly

sliding the suction end into place over the

suction hole in the main vacuum cleaner body

cavity, then push the handle end in to place until

a click is heard.

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 6

Using the attachments on the handheld vacuum cleaner

ush the accessories (4) or (5) into the suction

inlet on the end of the handheld vacuum

cleaner.

lternatively, for extra reach, attach the

accessories together and push the assembly

into the suction inlet on the end of the

handheld vacuum cleaner.

List of attachments

Crevice tool (4) for awkward places, corners

and behind radiators etc. This tool is also

useful on stairs.

Dusting brush (5) for carpet, upholstery and

stairs etc.

Handheld vacuum cleaning

This function is ideal for cleaning stairs,

curtains, upholstery and hard to reach places.

1To separate the handheld vacuum cleaner (10)

from the main vacuum cleaner body (11), press

the handheld vacuum cleaner release button

(12).

2Pull the handheld vacuum cleaner away from

the main vacuum cleaner body (11).

•After use, return the handheld vacuum cleaner

(10) to the cavity on the main vacuum cleaner

body (11) by firstly sliding the suction end into

place over the suction hole in the main vacuum

cleaner body cavity, then push the handle end

in to place until a click is heard.

•The handheld vacuum cleaner only has a high

power mode, not variable power.

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 7

When not in use, the attachments may be stored

on the storage / charging mount (6) as shown

below.

The storage / charging mount should already be

fitted to the wall (see ‘Charging / storage mount

fitting’ page 5).

WARNING: Always remove the handheld

vacuum cleaner from the main vacuum cleaner

body and the mains adaptor from the mains

supply before undertaking any maintenance or

cleaning procedures.

Your cleaner is manufactured to withstand normal

day-to-day use, but an occasional wipe over with

a damp cloth will help maintain its good looks.

Take care not to get the electrical connections wet.

Abrasive cleaners should not be used.

Empty the dust canister (17) regularly even if it does

not look full, this will maintain the performance.

1.Remove the handheld vacuum cleaner (10) from

the main vacuum cleaner body (11) (see

‘Handheld vacuum cleaning’, page 7).

2.Press the dust canister release buttons (19) and

pull the dust canister away from the handheld

vacuum cleaner.

3. Remove the dust canister filter holder assembly

(18) and empty the dirt from inside the dust

canister. Care should be taken not to release the

dust until over a bin.

At the same time, ensure the top and bottom areas

of the cyclone cone (18a) (see image 3 on page 9 )

are cleaned and free from dust or other debris.

4. It is recommended that the individual parts of the

dust canister filter holder assembly (18 - including

the pleated filter 18b) (see image 3 on page 9)

are brushed or tapped clean before refitting on

each empty of the dust canister (to access, see

‘Maintenance - filter’ section). In addition, they

must be washed monthly as instructed in the

‘Maintenance - filter’ section.

5. Fit all parts of the dust canister filter holder

assembly (18) back together, then refit back into

the dust canister (17), then replace the dust

canister back onto the handheld vacuum cleaner.

6. Replace the handheld vacuum cleaner (10) back

into the main vacuum cleaner body (11) if upright

cleaning.

Tool storage

aintenance

aintenance - emptying

the dust canister

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 8

The guarantee may be invalidated if the motor

is damaged due to: using the appliance

without the filters installed; not cleaning the

filters; or not replacing a damaged filter.

Cleaning the dust canister filters

To maintain suction, the individual parts of the

dust canister filter holder assembly (18) must

be cleaned each time the dust canister (17) is

emptied.

1.Follow steps 1-4 of ‘Emptying the dust canister’.

2.Pull the pleated filter (18b) out from the filter

holder assembly (18) by slightly twisting it

anti-clockwise, then pulling it away from the

cyclone cone (18a).

3. Every month, wash the pleated filter (18b) in

luke-warm water and thoroughly air dry before

re-fitting, as well as cleaning the cyclone cone

(18a).

I PORTANT: Do not wash the filters with hot

water or detergents.

I PORTANT: Do not use heated appliances to

dry the filters.

4. Fit all parts of the dust canister filter holder

assembly (18) back together, then refit back into

the dust canister (17), then replace the dust

canister back onto the handheld vacuum cleaner.

5. Replace the handheld vacuum cleaner back into

the main vacuum cleaner body (11) if upright

cleaning.

If the motorised floor brush (21) is stalled,

eg. by a foreign object or if used on very deep

pile carpet, switch off, remove the cause of the

stall, and leave for a few minutes to allow the

floor nozzle protection to self reset.

To clean the motorised floor brush, you must

remove the handheld vacuum cleaner as shown

in ‘Handheld vacuum cleaning’, page 7. Then,

press the floor brush release button (20) and pull

the motorised floor brush away.

Turn the motorised floor brush (21) over to

inspect the

rotating

brush bar (21c).

Push the locking button (21a) on the brush bar

cover (21b) forward to unlock the cover.

Open the brush bar cover

(21b)

and lift the

rotating

brush bar

(21c)

out. Pull away any hairs or fibres

from the

rotating

brush bar, checking especially

around the ends of the brush bar. If they are tightly

wound around the brush, carefully snip the fibres

with scissors, being careful not to damage the

rotating brush bar, pull away from the rotating

brush bar and dispose of. Also, check for any

blockages to the floorhead suction inlet - if any are

noted, clear before replacing the

rotating

brush

bar. Replace the rotating brush bar and brush bar

cover in their original position

and re-lock the

locking button

(21a)

aintenance - filters

aintenance - motorised

floor brush

18 a 18 b

21b

21c

21a

21c21b

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 9

•“Does not pick-up”/ “ otorised floor-brush

running slow or soon stops”

Check for hairs/fibres that may be wrapped

around the rotating brush-bar.

IMPORTANT: Remove the brush bar as described

on page 9. Fine hairs or fibres may be caught

unseen in the ends of the brush bar. Carefully

remove the hairs and re-fit the brush bar.

•“Does not pick-up” / “Suction of handheld

cleaner has reduced”

In addition to emptying the dust canister, it is very

important that the individual parts of the dust

canister filter holder assembly (18) (see image 3

on page 9) are regularly and thoroughly cleaned.

See ‘Maintenance - filters’ section on page 9 for

details of how to access and clean them.

•“Does not pick-up from the floor but the floor

brush is rotating and the handheld has good

suction”

Switch off the product, remove the motorised

floor brush and check for blockages in the

floorhead suction inlet connector area between

the motorised floor brush and the main vacuum

cleaner body.

•“Product not charging”

Check the indicator light (16) on the front of the

handheld cleaner is glowing to indicate that

charging is in process. If the indicator is not

showing, check the mains adaptor is fully fitted into

the mains socket and the socket is switched on.

Fit the handheld vacuum cleaner

(10)

back into

the cavity on the main vacuum cleaner body

(11)

by firstly sliding the suction end into place over

the suction hole in the main vacuum cleaner body

cavity, then push the handle end in to place until a

click is heard.

The upright handle

(1)

is collapsible for compact

storage by turning the upright handle release dial

(8)

towards the front of the main vacuum cleaner

body.

WARNING: When locking the handle, keep this

area clear. Be careful not to trap your fingers

or any loose items of clothing etc

Place the tools onto the charging / storage mount

(6)

(see ‘Tool storage’, page 8).

Rather than compact storage (as described in point

2), you may wish to hang the product from the

charging / storage mount (which must be attached

to a wall using suitable screws and wall plugs). Use

the storage hook (7) to hang the product from the

lip in the centre of the charging / storage mount.

aintenance - troubleshooting

Storage

Wall

VC732102 MUK Rev1.qxp_Instructi n B k 14/11/2016 09:28 Page 10

Inhaltsverzeichnis

Andere Morphy Richards Staubsauger Handbücher

Morphy Richards

Morphy Richards Orb vacuum cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards VORTICITY Bedienungsanleitung

Morphy Richards

Morphy Richards IB73301 Bedienungsanleitung

Morphy Richards

Morphy Richards IB70041 Bedienungsanleitung

Morphy Richards

Morphy Richards IB70191 Bedienungsanleitung

Morphy Richards

Morphy Richards Ultralight bagless vacuum cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards Allergy cylinder vacuum cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards IB70313 Bedienungsanleitung

Morphy Richards

Morphy Richards Bagless Vacuum Cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards ESSENTIALS CYLINDER VACUUM CLEANER - REV 3 Bedienungsanleitung

Morphy Richards

Morphy Richards 73333 Bedienungsanleitung

Morphy Richards

Morphy Richards Ecovac 70096 Rev 2 (Page 1) Bedienungsanleitung

Morphy Richards

Morphy Richards IB73350 Bedienungsanleitung

Morphy Richards

Morphy Richards Goblin 73276 Bedienungsanleitung

Morphy Richards

Morphy Richards Essentials 73179 Bedienungsanleitung

Morphy Richards

Morphy Richards 73332 Bedienungsanleitung

Morphy Richards

Morphy Richards PERFORMAIR CYCLONIC VACUUM CLEANER 71062 Bedienungsanleitung

Morphy Richards

Morphy Richards IB70240 Bedienungsanleitung

Morphy Richards

Morphy Richards IB73180 Bedienungsanleitung

Morphy Richards

Morphy Richards STORM LIGHT UPRIGHT VACUUM CLEANER - REV 3 Bedienungsanleitung

Morphy Richards

Morphy Richards 732000 Supervac Bedienungsanleitung

Morphy Richards

Morphy Richards Essentials Family and Pets+ Bedienungsanleitung

Morphy Richards

Morphy Richards PerformAir Upright Vacuum Bedienungsanleitung

Morphy Richards

Morphy Richards ESSENTIALS COMPACT BAGLESS VACUUM CLEANER Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch