Moxa Technologies NPort Z2150 Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802021504010

NPort Z2150

Quick Installation Guide

First Edition, November 2011

Overview

The NPort Z2150 is a reliable wireless serial I/O with support for

serial to ZigBee communications. The NPort Z2150 can act as a

ZigBee Coordinator, ZigBee Router or ZigBee End Device. Any

serial device can be connected by the NPort Z2150 and exchange

data via Personal Area Network (PAN).

Package Checklist

Before installing the NPort Z2150, verify that the package contains

the following items:

Standard Accessories

•NPort Z2150

•Documentation & Software CD

•Power adaptor (not included with wide temperature models)

•Warranty statement

•Quick Installation Guide

•2.4 GHz, omni-directional antenna

Optional Accessories

•DK-35A: DIN-rail mounting kit (35 mm)

NOTE: Please notify your sales representative if any of the above

items are missing or damaged.

Hardware Introduction

LED Indicators

LED

Color

Descriptions

Ready/Fault

Green

On: System power is on

Blinking: Pull down the reset button

Red

Blinking:

1) Node ID conflict

2) Destination node ID disappeared

ZigBee Link

Green

Coordinator:

ON: ZigBee PAN initialized successfully

Blinking: ZigBee Tx/Rx

Off: ZigBee PAN initialization failure

Router:

On: Joined ZigBee PAN successfully

Blinking: ZigBee Tx/Rx

Off: Failure to join ZigBee PAN

End Device:

On: Joined ZigBee PAN successfully

Blinking: ZigBee Tx/Rx

Off: Failure to join ZigBee PAN/ parent

node removed

Serial Tx/Rx

Green

Serial data output to serial port

Orange

Serial data input from serial port

The NPort Z2150 models have one serial port. All models support

RS-232/422/485 with DB9 connectors.

Reset Button

The reset button is used to load factory defaults. Use a pointed

object such as a straightened paper clip to hold the reset button

down for five seconds. Release the reset button when the Ready

LED stops blinking.

DIP Switch

Serial Connection

Console Mode

Operation Mode

OFF

Note: 2 reserved for future use

Pull High/Low Resistors for RS-422/485

You may need to set the pull high/low resistors when termination

resistors are used for certain RS-422 or RS-485 environments.

Pull High

Pull Low

Terminator

Reserved

1KΩ

120KΩ

Default

OFF

150KΩ

NOTE

Do not use the 1K Ω se tt in g while in RS

232 mode. Doing so

will degrade the RS

-232 signals and reduce the effective

communication distance.

First-time Hardware Installation

STEP 1: After removing the NPort Z2150 from the box, set

the DIP-switch to console mode and use a cross-over serial cable

to connect the NPort’s DB9 serial port directly to your computer’s

serial port to configure.

STEP 2: Attach the power adaptor to the NPort and then plug

the adaptor into an electrical outlet.

STEP 3: Configure the NPort Z2150 through the serial port.

See the next section for software installation information.

Software Installation Information

Insert the Documentation & Software CD. A window should open

with several options displayed:

•Click Documents and select “NPort Z2150 Series User’s

Manual” to view the user’s manual.

•Click Install Utility and follow the on-screen instructions to

install the ZigBee Configuration Utility. This utility can be used

to search for NPort Z2150 units via serial ports.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Pin Assignments and Cable Wiring

RS-232

RS-422,

4w RS-485

2w RS-485

DCD

TxD-(A)

---

RXD

TxD+(B)

---

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

---

RTS

---

CTS

---

Specifications

Power Requirements

Input Voltage: 12 to 48 VDC

Power Consumption: 45 mA @ 12 V

Connector: Power Jack

Physical Characteristics

Weight: 340g

Dimension:

Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)

With ears: 75 x 80 x 22 mm (2.95 x 3.15 x 0.87 in)

Regulatory Approvals

EMC: CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B

Class A

Safety: UL (UL60950-1), LVD (EN60950-1)

WARNING

1. This equipment is intended to be used in a Restricted

Access Location.

2. This product is intended to be supplied by an UL 60950

and IEC 60950

-1 certified power supply marked “

LPS” and

rated output rating: 12

to 48 VDC, 45 mA @ 12 V

minimum,

75°C.

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies IMC-P101 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-M-ST Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Media Converter Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 451 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 464 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-S-ST-RM Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-RM Series Handbuch

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-90 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1280I Series Handbuch

Moxa Technologies

Moxa Technologies ME60A Handbuch

Moxa Technologies

Moxa Technologies UPORT 1400 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101G Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1200 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CSM-200-1213 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME51 Bedienungsanleitung

Moxa Technologies

Moxa Technologies N Port Express Installations- und Benutzerhandbuch

Moxa Technologies

Moxa Technologies VPort 251 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 461A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 2000 Series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung