Moxa Technologies ICF-1150 series Bedienungsanleitung

ICF-1150 Series

Quick Installation Guide

First Edition, November 2008

Reproduction without permission is prohibited.

Fl.4, No.135, Lane 235, Pao-Chiao Rd. Shing Tien City, Taipei, Taiwan,

R.O.C.

TEL: +886-2-8919-1230

P/N: 1802011500010

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

- 2 -

Overview

Introduction

The ICF-1150 series fiber converters are equipped with a multiple interface

circuit that can handle RS-232 and RS-422/485 serial interfaces, as well as

multi-mode or single-mode fiber. The ICF-1150 series converters are used to

extend serial transmission distance up to 5 km (ICF-1150-M, with multi-mode

fiber) or up to 40 km (ICF-1150-S, with single-mode fiber).

Why Convert Serial to Fiber?

Fiber communication not only extends the communication distance, but also

provides many advantageous features. IMMUNITY FROM ELECTRICAL

INTERFERENCE: Fiber is not affected by electromagnetic interference or

radio frequency interference. It provides a clean communication path and is

immune to cross-talk. INSULATION: Optical fiber is an insulator; the glass

fiber eliminates the need for using electric currents as the communication

medium. SECURITY: Fiber cannot be tapped by conventional electric means

and is very difficult to tap into optically. Furthermore, radio and satellite

communication signals can be captured easily for decoding. RELIABILITY &

MAINTENANCE: Fiber is immune to adverse temperature and moisture

conditions, does not corrode or lose its signal, and is not affected by short

circuits, power surges, or static electricity.

Reverse Power Protection

The Reverse Power Protection feature provides extra protection against

accidentally connecting the power cables to the wrong terminal. The converter

is designed to detect automatically which power wire is positive and which is

negative, and then adjust the power supply accordingly.

3-Way Communication

The ICF-1150 series supports 2 serial ports. The D-sub connector is for RS-232

communication and the removable terminal block is for RS-422 or RS-485

communication. The 3 ports (2 serial ports and one fiber port) are completely

independent. When the ICF-1150 series converters receive data from any port,

it will send data out through the other 2 ports. For example, when the ICF-1150

series converters receive a command from the remote Master via the fiber port,

it will convert the command and transmit it via the RS-232 port and

RS-422/485 port at the same time. So if the user is trying to monitor a system

running on the RS-485 network, there is no need to use an additional RS-232 to

RS-485 converter to connect the laptop computer’s serial port to the RS-485

bus.

ATTENTION

ICF-1150 is designed to receive data from one port and send

data to the other ports.

If ICF-1150 receive data from 2 ports at the same time, that

may cause the data error on all the RX ports.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

- 3 -

Rotary Switch for Pull High/Low Resistor Setting

Since the RS-485 port can support multi-drop connection or daisy-chain

connection, system engineers can connect meters, RTUs, readers, or many

other devices together on the same bus. The impedance of the data line will rise

according to the number of serial devices on the same bus. To get the system

working, the ICF-1150 has a setting for tuning the pull high/low resistor. Just

turn the dial to find the best resistor value for the system without removing the

ICF-1150 from the DIN-rail. (The default settings are 1K for both switches.)

Pull High/Low Resistor

Position 0 1 2 3 4 5 6 7 8 9

Ohm 150K 10K 4.7K 3.3K 1K 909 822 770 500 485

DIP Switch for Selectable Terminator

The termination resistor for many products of this type is set by a jumper

located inside the product’s casing. To disable or change the resistor’s strength,

the user must open the casing to reset the jumper. Moxa offers a more

user-friendly solution that allows users to set the termination resistor with a

DIP switch located outside the ICF-1150 converter’s casing.

No Configuration Required for Baudrate Settings

The ICF-1150 works under any baudrate from 50 bps to 921.6 Kbps. The

ICF-1150 simply converts the signal back and forth between serial (RS-232,

RS-422, or RS-485) and fiber. Since the ICF-1150 does not need to interpret

the signal, it does not need to know the baudrate of the transmitting device. For

this reason, the ICF-1150 does not have any DIP switches or jumpers for

setting the baudrate.

Ring Mode

To allow one half-duplex serial device to communicate with multiple

half-duplex devices connected to a fiber ring, you should configure the

ICF-1150 for “ring mode” by setting DIP switch “SW3” to the “On” position.

The Tx port of a particular ICF-1150 unit connects to the neighboring

converter’s Rx port to form the ring. Note that when one node transmits a

signal, the signal travels around the ring until it returns back to the transmitting

unit, which then blocks the signal. Users should ensure that the total fiber ring

length is less than 100 km when using either single-mode models or

multi-mode models.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

- 4 -

Features

y“Ring” or “Point to Point” transmission

yExtend RS-232/422/485 transmission distance:

¾up to 40 km with single-mode—ICF-1150-S series

¾up to 5 km with multi-mode—ICF-1150-M series

ySupport baudrate up to 921.6 Kbps

yProvide 3-way galvanic isolation (for –I models)

yWide operating temperature from -40 to 85°C (for “T” models)

Package Checklist

Before installing the ICF-1150, verify that the package contains the following

items:

yICF-1150 Fiber Converter

yQuick Installation Guide

yWarranty Card

NOTE: Please notify your sales representative if any of the above items are

missing or damaged.

Mounting Dimensions (Unit : mm)

ICF-1150-SC

23.8 70 8.8

8.8

48.39 33.41

115 30.3

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

- 5 -

ICF-1150-ST

13.66 70 8.8

8.8

48.39 33.41

115 30.3

Top View

Front View

LED

Fiber Port

OP Mode Switch

Rotary Switch for Pull High/Low Resistor

RS-422/485

ATTENTION

Electrostatic Discharge Warning!

To protect the product from damage due to electrostatic

discharge, we recommend wearing a grounding device when

handling your ICF-1150 series.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

- 6 -

Mounting

The aluminum DIN-Rail attachment plate should be fixed to the back panel of

the ICF-1150 when you take it out of the box. If you need to reattach the

DIN-Rail attachment plate to the ICF-1150, make sure the stiff metal spring is

situated towards the top, as shown in the figures below.

STEP 1:

Insert the top of the DIN-Rail into the slot just below the stiff metal spring.

STEP 2:

The DIN-Rail attachment unit will snap into place as shown below.

metel spring

DIN-Rail

metel spring

DIN-Rail

To remove the ICF-1150 series from the DIN-Rail, simply reverse Steps 1 and

2 above.

Pin Assignment

Pin RS-232

1 Null

2 TxD

3 RxD

4 Null

5 GND

6 Null

7 Null

8 Null

9 ---

12345

RS-422 4-wire RS-485 2-wire RS-485

1 GND GND GND

2 Rx- Rx- Data -

3 Rx + Rx + Data +

4 Tx - Tx -

5 Tx + Tx +

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

- 7 -

Fiber Cable

SC-Port Pinouts SC-Port to SC-Port Cable Wiring

Cable Wiring

A A

B B

ST-Port Pinouts ST-Port to ST-Port Cable Wiring

Cable Wiring

A A

B B

ATTENTION

This is a Class 1 laser/LED product. Do not stare into the

laser beam.

Switch Settings

There are 4-DIP switches on the front panel of the ICF-1150.

Setting Switch 1 Switch 2

RS-422 ON OFF

2-wire RS-485 OFF ON

4-wire RS-485 OFF (default) OFF (default)

Fiber Mode Switch 3

Ring Mode ON

Point to Point mode OFF (default)

120ΩTerminator Switch 4

Enable ON

Disable OFF (default)

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

- 8 -

ATTENTION

For Fiber Ring Users:

If the Rx LEDs of the converter glow continuously, remove

the fiber cable and connect again, then the system will not

have the same condition.

NOTE: “Ring Mode” can only be used for half-duplex

applications.

LED Indicators

There are 3 LEDs on the front panel of the ICF-1150.

LED Color Function

PWR Green Steady ON: Power is ON

Fiber Tx Green When sending serial data from the fiber port

Fiber Rx Yellow When receiving data from the fiber port

Specifications

Serial Communication

Signals for RS-232 TxD, RxD, SGND

Signals for RS-422 TxD+, TxD-, RxD+, RxD-, SGND

Signals for 4-wire RS-485 TxD+, TxD-, RxD+, RxD-, SGND

Signals for 2-wire RS-485 Data+, Data-, SGND

Baudrate 50 bps to 921.6 Kbps

ESD protection 15 KV ESD

Fiber Communication

Connector type ST or SC

Distance Single-mode fiber for 40 km

Multi-mode fiber for 5 km

Support Cable : 8.3/125, 8.7/125, 9/125 or 10/125 μm

(single mode)

50/125, 62.5/125, or 100/140 μm

(multimode)

Wavelength ICF-1150-S: 1310 nm

ICF-1150-M: 850 nm

TX Output ICF-1150-S: > -5 dBm

ICF-1150-M: > -5 dBm

RX Sensitivity ICF-1150-S: -25 dBm

ICF-1150-M: -20 dBm

Point-to-Point Transmission Half or Full duplex

Multi-drop Transmission Half duplex, fiber ring

Environmental

Operating Temperature

0 to 60°C (32 to 142°F), 5 to 95 % RH

-40 to 85°C (-40 to 167°F) for –T Model

Storage Temperature -40 to 85°C (-4 to 185°F), 5 to 95 % RH

Power

Input Power Voltage 12 to 48 VDC

Power Line Protection 4 KV Burst (EFT), EN61000-4-4

2 KV Surge, EN61000-4-5

Reverse Power Protection Protects against V+/V- reversal

Over Current Protection Protects against 2 signals shorted together:

1.1A

Power Consumption ICF-1150-S/M-SC/ST: 127 mA@ 12V

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

- 9 -

ICF-1150I- S/M-SC/ST: 163 mA @ 12V

Mechanical

Dimensions (W × D × H) 30.3 × 70 × 115 mm

Material Aluminum (1 mm)

Gross Weight 135g

Regulatory Approvals

CE Class B

FCC Part 15 sub Class B

TÜV EN 60950-1

EMI EN55022 1998, Class B

EMS EN61000-4-2 (ESD), Criteria B, Level 4

EN61000-4-3 (RS), Criteria A, Level 3

EN61000-4-4 (EFT), Criteria B, Level 4

EN61000-4-5 (Surge), Criteria A, Level 3

EN61000-4-6 (CS), Criteria A, Level 3

En61000-4-8 (PFMF), Criteria A, Level 5

Free fall IEC 60068-2-32

MTBF 792085 hrs

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel: +1-714-528-6777

Fax: +1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel: +86-21-5258-9955

Fax: +86-10-6872-3958

Moxa Europe:

Tel: +49-89-3 70 03 99-0

Fax: +49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-9308-Moxa-ICF-1150-M-ST.aspx

Andere Handbücher für ICF-1150 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies UPort 2210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-21GA-T Handbuch

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies N Port Express Installations- und Benutzerhandbuch

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-21A IMC-21A Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME61 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1180I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio TCC-82 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 451 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-S Bedienungsanleitung

Moxa Technologies

Moxa Technologies A50 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 364 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5118 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 354 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1170I-M-ST Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME51 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-141-S Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101G Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-M-SC-RM Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung