ParaBody 777101 Bedienungsanleitung

777101 GYM SYSTEM

1CLASSH

PART # 7017401

REV. F

Version: 777101

Revision: 06/11/01

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................5

Assembly Instructions.....6-25

General Maintenance.......26

Warranty Statement..........27

Product Services..............28

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 777 Gym System. Please read these instructions

thoroughly and keep them for future reference.

* Rubber mallet or hammer

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* 5/32”Allen wrench

*Adjustable wrench

* Tape measure

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDEOFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* Do not securely tighten any frame connections until the entire frame have been assembled

unless otherwise specified.

Minimum Required Usable Space

Length = 90 inches (229 cm) 7’ 6”

Width = 103 inches (262 cm) 8’ 7”

Height = 84 inches (213.5 cm) 7”

1 Square = 1’ X 1’

Length = 90 inches (229 cm) 7’ 6”

Width = 130 inches (330 cm) 10’ 10”

9’1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’

1’

6’

5’

4’

3’

2’

Dimensions Including Leg Press (optional)

7’

8’

9’

PARTS LIST

PAR T #

70077

70076

70058

70014

70015

70017

70019

70056

70067

69408

69885

69954

69957

70082

70083

69947

6194601

6816501

7016902

7016901

6939202

6382301

69537

3221702

6978101

7095701

6972201

3108002

6987801

6987901

6988001

6988101

7012102

KEY

QTY

PART #

3102503

6409101

3103302

3116201

3116101

6993701

6412001

3103801

6416601

6145801

3105401

3108901

6866801

6866601

6480301

6480302

6122702

6122701

6549301

3102924

3102807

3102922

3221902

3102905

3102917

6075906

3102906

3102930

3102804

3102802

3102501

6020601

70718

3102904

DESCRIPTION

3/4” FLATWASHER

ANKLESTRAP

SHAFTCOLLAR

3-1/2” PULLEY

4-1/2” PULLEY

4-1/2” V-GROOVE PULLEY

SPRING PINASSEMBLY

SNAP LINK

PARAGLIDE (QTY8)

3 PRONG KNOB

STARLOCK

PLASTICWASHER

1/2” RH WASHER

RH CAP

3/8” X 9/16” FLANGE SPACER

3/8 X 1-1/16” FLANGE SPACER

3/8 X 1/2” SPACER

3/8” X 1” SPACER

3/4 X 17” TUBE

3/8 X 1-3/4” BOLT

3/8 LOW HEIGHT LOCK NUT

3/8 X 2-3/4” BOLT

2” NYLON SPACER

3/8 X 3-3/4” BOLT

1/2 X 4” BOLT

12 LINK CHAIN

3/8 X 4” BOLT

3/8 X 7” BOLT

1/2” LOW HEIGHT LOCK NUT

3/8” LOCK NUT

3/8” FLATWASHER

1/2” FLANGE BEARING

FOOTPLATE

3/8 X 3” BOLT

QTY

DESCRIPTION

BASE

UPRIGHT

SEATADJUST

RIGHTARM SUPPORT

LEFTARM SUPPORT

RIGHTARM

LEFTARM

LEG PEDESTAL

PULLEYBRACKET

PULLEYPLATE

BASEPLATE

V-PULLEYPLATE

BOOM PULLEYPLATE

RIGHT BOOM PLATE

LEFT BOOM PLATE

PAD

ROLLER PAD

76” GUIDE ROD

14-1/2” SEWN HANDLE

7-1/2” SEWN HANDLE

WEIGHTPLATE

WEIGHT PLATE BUSHING 10 CT

HEADPLATE

E-RING

WEIGHTSTACK LABEL

WEIGHTPLATESHAFT

WEIGHT STACK PIN

WEIGHT STACK CUSHION

WEIGHTSTACKCABLE

LEG CABLE

ARM CABLE

BOOM CABLE

WEIGHT STACK SPACER

KEY

0123456

1/2 1/2 1/2 1/2 1/2 1/2

PART #

7051908

7052008

7114908

7115008

KEY

QTY

PART #

3202401

3228501

3102903

3102802

DESCRIPTION

3/8 X 1” BUTTON HEAD BOLT

3/8” BLACK SAE WASHER

3/8 X 2-1/2” BOLT

3/8” LOCK NUT

QTY

DESCRIPTION

LEFT SHROUD

RIGHT SHROUD

TOPSHROUDBRACKET

BOTTOMSHROUD BRACKET

KEY

The following parts are included with the 220 SHROUD OPTION

FIGURE 1

STEP 1:

• LOOSELY assemble two BASE PLATES (11) to the BASE (1) and the UPRIGHT(2) using four 3/8 X 3-3/4” BOLTS (57) and four

3/8” LOCK NUTS (63). See FIGURE 1.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

57 3/8 X 3-3/4”

3/8 X 3” 67

• Insert two two 3/8 X 9/16” FLANGE SPACERS (48) into the upper hole of the FRAME (2) as shown.

• LOOSELY assemble the FOOTPLATE (66) to the FRAME (2) using one 3/8 X 3” BOLT (67) and one 3/8” LOCK NUT (63) as

shown in FIGURE 1.

FIGURE 3

STEP 3:

FIGURE 2

• Insert two WEIGHT PLATE BUSHINGS (22) into each of the fifteen WEIGHT PLATES (21) as shown in FIGURE 2.

STEP 2:

• Slide the WEIGHT PLATE SHAFT (26) thru the hole in the HEAD PLATE(23), and lock in place using one E-RING (24) as shown

in FIGURE 3.

FIGURE 4

STEP 4:

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Insert two GUIDE RODS (18) into the BASE (1) as shown on FIGURE 4. (NOTE: If the 777 SHROUD OPTION was pur-

chased, place the GUIDE RODS (18) through the BOTTOM SHROUD BRACKET (71) and into the BASE (1) as shown

in FIGURE 4.

• Slide two WEIGHT STACK SPACERS (33), two 3/4” FLAT WASHERS (34), and two WEIGHT STACK CUSHIONS (28) down

over the GUIDE RODS (18).

• Using EXTREME CARE slide all fifteen WEIGHT PLATES (21) down over the GUIDE RODS (18) on to the WEIGHT STACK

CUSHIONS (28). Make sure that the WEIGHT PLATES (21) are all facing as shown.

• Slide the head plate assembly down over the GUIDE RODS (18) onto the weight stack.

• Slide two SHAFT COLLARS (36) over the GUIDE RODS (18) as shown in FIGURE 4.

• (NOTE: Lubricate GUIDE RODS (18) with silicon or teflon spray available at most hardware stores.)

71 777 SHROUD

OPTIONONLY!

STEP 5:

• Swing the GUIDE RODS (18) into the guide rod bushings in each of the RIGHT and LEFT UPRIGHT PLATES (14 & 15) as shown

in FIGURE 5.

• LOOSELY assemble the RIGHT and LEFT UPRIGHTPLATES (14 & 15) to the UPRIGHT (2) using three 3/8 X 3-3/4” BOLTS (57)

and three 3/8” LOCK NUTS (63). See FIGURE 5.

STEP 6:

• LOOSELY assemble the RIGHT and LEFTARM SUPPORTS (4 & 5) to the BASE (1) using four 3/8 X 3-3/4” BOLTS (56), four

3/8” FLAT WASHERS (64), and four 3/8” LOCK NUTS (63). See FIGURE 6.

3/8 X 3-3/4” 57

2 63

FIGURE 6

FIGURE 5

3/8 X 3-3/4” 57

• Slide the SHAFT COLLARS (36) to the top of the GUIDE RODS (18) and tighten set screws as shown in FIGURE 5.

TIGHTEN!

• Apply WEIGHT STACK LABELS (25) to the WEIGHT PLATES (21) as shown in FIGURE 6.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP 7:

STEP 8:

• SECURELY assemble one SEAT PAD (16) to the SEATADJUST (3) using two 3/8 X 2-3/4” BOLTS (55) and two 3/8” WASHERS

(64). See FIGURE 8.

FIGURE 8

FIGURE 7

• LOOSELY assemble the RIGHT and LEFTARMS (6 & 7) to the UPRIGHT (2) and the RIGHT and LEFTARM SUPPORTS (4

& 5) using two 3/8 X 4” BOLTS (60), four 3/8” FLAT WASHERS (64), and two 3/8” LOW HEIGHT LOCK NUTS (54). See

FIGURE 7.

3/8 X 4” 60

3/8 X 2-3/4” 55

Andere Handbücher für 777101

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 474 Bedienungsanleitung

ParaBody

ParaBody 877101 Montageanleitung

ParaBody

ParaBody 216 50 LB Bedienungsanleitung

ParaBody

ParaBody 855103 Bedienungsanleitung

ParaBody

ParaBody Parabody 805 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 827104 Bedienungsanleitung

ParaBody

ParaBody 883101 Bedienungsanleitung

ParaBody

ParaBody Hip Sled System Bedienungsanleitung

ParaBody

ParaBody 855 Bedienungsanleitung

ParaBody

ParaBody 880 Bedienungsanleitung

ParaBody

ParaBody 838 Bedienungsanleitung

ParaBody

ParaBody 778 Bedienungsanleitung

ParaBody

ParaBody 893102 Montageanleitung

ParaBody

ParaBody 867101 Montageanleitung

ParaBody

ParaBody 874104 Montageanleitung

ParaBody

ParaBody 827 LAT MACHINE Bedienungsanleitung

ParaBody

ParaBody GS2 Bedienungsanleitung

ParaBody

ParaBody 808106 Bedienungsanleitung

ParaBody

ParaBody 827102 Bedienungsanleitung

ParaBody

ParaBody 476 Montageanleitung

ParaBody

ParaBody 914101 Bedienungsanleitung

ParaBody

ParaBody 781 Bedienungsanleitung

ParaBody

ParaBody 8661O2 Bedienungsanleitung

ParaBody

ParaBody Free Weight Systems Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung