ParaBody 874 Bedienungsanleitung

874 MULTI-ANGLE BENCH SYSTEM

CLASSH

PART#7710601

REV. B Revision:03/15/04

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

Version: 874109

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................5

Assembly Instructions.....5-9

General Maintenance.......10

Warranty Statement..........11

Product Services..............12

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 874 Multi-Angle Bench System. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHE HEAD OFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

1 Square = 1’ X 1’

1’ 2’ 3’ 4’ 5’

1’

7’

6’

5’

4’

3’

2’

PARTS LIST

PART #

6650609

6650109

6649309

6624210

6624310

6259109

7710409

6654521

6654421

6406401

6412001

6236701

6692601

6405201

7234801

6145801

KEY

QTY

PART #

3235204

3235212

3114403

3114702

3235315

3235322

3235432

3235501

3221705

6417801

6650201

6416601

7339801

7656301

3235207

DESCRIPTION

3/8X 1”BOLT

3/8X 3”BOLT

3/8”WASHER

3/8”LOCKNUT

1/2X3-3/4”BOLT

1/2X5-1/2”BOLT

1/2X 8”BOLT

1/2”LOWHEIGHTLOCKNUT

1/2” E-RING

1/2 X 1” SPRING

1/2” FLANGE SPACER

1-1/2 X 3/4” GLIDE (8 PER)

1/2”DIAU-PIN

WHEEL

3/8X1-3/4”BOLT

QTY

DESCRIPTION

BENCHFRAME

ADJUSTABLESLIDE

ADJUSTABLESLEEVE

LEFTBACKPADANGLE

RIGHTBACKPADANGLE

FRONTBASE

REARBASE

SEATPAD

BACKPAD

HINGETAB

SPRINGPINASSEMBLY

1-3/4”SQ.END CAP

3X 2”END CAP

2”SQ.ENDCAP

2”SQ.COVERCAP

THUMBSCREW

KEY

FIGURE 1

STEP 1:

• Assemble the 1/2” DIA. U-PIN (29) to the BENCH FRAME (1) using one 1/2 X 1” SPRING (26), and one 1/2” E-RING (25) as

shown in FIGURE 1.

• Thread one THUMBSCREW (16) into the BENCH FRAME (1) as shown in FIGURE 1. The THUMBSCREW (16) will be used to

tighten down attachments.

FIGURE 2

STEP2:

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• SECURELYassemble the FRONTBASE (6) to theBENCHFRAME (1) using two 3/8 X3”BOLTS(18), four 3/8”WASHERS (19),

andtwo 3/8”LOCK NUTS(20).See FIGURE2.

• Slidefour 2” SQ. COVER CAPS (15) over the endsof the FRONT & REAR BASE (6 & 7) as shown in FIGURE 2.

18 3/8 X 3”

• SECURELYassemblethe REAR BASE (7) to the BENCH FRAME(1)using two 3/8 X 3” BOLTS(18), four 3/8”WASHERS(19), and

two3/8”LOCK NUTS(20). SeeFIGURE 2.

• SECURELYassemble twoWHEELS (30) to the REAR BASE (7) using two 3/8 X 1-3/4” BOLTS(31) and two 3/8” LOCK NUTS (20) as

shownin FIGURE 2.

31 3/8X 1-3/4”

STEP 3:

FIGURE 3

• Insert one 1-3/4” END CAP(12) into the end of theADJUSTABLE SLIDE (2) as shown in FIGURE 3.

• Attach eight 3/4 X 1-1/2” GLIDES (28) to the inside of the ADJUSTABLE SLEEVE (3) as shown in FIGURE 3 using the

following steps:

• Thoroughly clean all surfaces where the 3/4 X 1-1/2” GLIDES (28) are to be attached.

• Remove the 3/4 X 1-1/2” GLIDES (28) from the paper backing and firmly apply them to all shown surfaces.

• SECURELYassemble one SPRING PINASSEMBLY(11)tothe spring pin barrelon theADJUSTABLESLEEVE (3). SeeFIGURE3.

• Pullback on theSPRINGPIN (11)and CAREFULLYinsert theADJUSTABLESLIDE(2) into theADJUSTABLESLEEVE (3) asshown

inFIGURE3.

• AssembletheADUSTABLESLEEVE (3)totheBENCHFRAME(1)using one1/2 X3-3/4” BOLT(21),two 1/2”FLANGE SPACERS (27),

andone 1/2” LOW HEIGHTLOCK NUT (24) asshownin FIGURE 3.

1/2X 3-3/4” 21

24 1/2”LOWHEIGHT

STEP 4:

FIGURE 4

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Assemble the LEFTand RIGHTBACKPADANGLE(4 & 5) and two HINGE TABS (10) to the BENCH FRAME (1) using one 1/2 X 8”

BOLT(23) andone 1/2” LOWHEIGHTLOCKNUT(24)as shown inFIGURE4.

1/2 X 8” 23

24 1/2”LOWHEIGHT

22 1/2X 5-1/2”

• Assemble the LEFTand RIGHTBACK PADANGLE(4 & 5) to theADJUSTABLESLIDE (2) using one 1/2 X 5-1/2” BOLT(22)and

one1/2” LOWHEIGHTLOCK NUT (24)as shown inFIGURE 4.

STEP5:

FIGURE 5

• SECURELYassemble the SEATPAD (8)tothe HINGETABS(10) using two3/8 X 1”BOLTS(17)and two 3/8”WASHERS(19)as shown

inFIGURE5.

3/8 X 1” 17

• SECURELYassemblethe BACK PAD(9)to the LEFTBACK PADANGLE(4) and theRIGHTBACKPADANGLE(5) using four 3/8

X1” BOLTS (17) andfour3/8”WASHERS (19) asshowninFIGURE 5.

ThankyouforpurchasingtheParabody874101MULTI-ANGLE BENCH. If unsureof properuse of equip-

ment,callyourlocalParabodydistributororcalltheParabodycustomerservicedepartmentat (800)328-9714.

• Slideone 2” SQ. ENDCAP (14) into the topof the BENCH FRAME (1)as shown in FIGURE 5.

• Slideone 3 X 2” END CAP (13) into the frontof the BENCH FRAME (1)as shown in FIGURE 5.

MAINTENANCE

MODEL #________________________

SERIAL #_________________________

DATE OF PURCHASE: _____________

DEALERS NAME: _________________

DEALERS PHONE #_______________

* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy

water. Touch-up paint can be purchased from your ParaBody customer service representative

at (800) 328-9714.

* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.

Failure to do so may result in serious injury

Thank you forpurchasing the ParaBody 874 Multi-Angle Bencb System.

Please note:

* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT

YOU MAY NEED SERVICE YOU WILLBEASKED FOR THIS INFORMATION.

REMEMBER TO FILL OUTYOUR WARRANTY REGISTRATION CARD AND

MAIL BACK.

SERIALNUMBER

LOCATION

Andere Handbücher für 874

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

ParaBody

ParaBody 802101 Montageanleitung

ParaBody

ParaBody 872101 Montageanleitung

ParaBody

ParaBody 700 Montageanleitung

ParaBody

ParaBody Serious Steel 805106 Bedienungsanleitung

ParaBody

ParaBody 832102 Bedienungsanleitung

ParaBody

ParaBody Leg Press 100 Bedienungsanleitung

ParaBody

ParaBody 848 Bedienungsanleitung

ParaBody

ParaBody 777101 Bedienungsanleitung

ParaBody

ParaBody 854 Montageanleitung

ParaBody

ParaBody 866101 Montageanleitung

ParaBody

ParaBody PBF005C Bedienungsanleitung

ParaBody

ParaBody 874106 Bedienungsanleitung

ParaBody

ParaBody 832101 Bedienungsanleitung

ParaBody

ParaBody 838101 Bedienungsanleitung

ParaBody

ParaBody 861 Montageanleitung

ParaBody

ParaBody 821 Bedienungsanleitung

ParaBody

ParaBody 813102 Bedienungsanleitung

ParaBody

ParaBody Free Weight Smith System Bedienungsanleitung

ParaBody

ParaBody 705101 Montageanleitung

ParaBody

ParaBody 877101 Montageanleitung

ParaBody

ParaBody 821104 Bedienungsanleitung

ParaBody

ParaBody 661101 Bedienungsanleitung

ParaBody

ParaBody Serious Steel Pro System Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung