Pfeiffer Vacuum DualGauge TPG 262 Bedienungsanleitung

Operating Instructions

Incl. Declaration of Conformity

BG 805 196 BE / B (2004-08) 1

DualGauge™

Dual-Channel Measurement and

Control Unit for Compact Gauges

TPG 262

VACUUM

2BG 805 196 BE / B (2004-08) TPG262.oi

In all communications with Pfeiffer Vacuum, please

specify the information on the product nameplate. For

convenient reference copy that information into the

space provided below.

Typ:

No:

F-No:

V Hz VA

Pfeiffer Vacuum, D-35614 Asslar

This document applies to products with part number

PTG28280.

The part number (No.) can be taken from the product

nameplate.

This manual is based on firmware version 302-510-A.

If your unit does not work as described in this document,

please check that it is equipped with the above firmware

version (→60).

We reserve the right to make technical changes without

prior notice.

All dimensions are indicated in mm.

Product Identification

Validity

BG 805 196 BE / B (2004-08) TPG262.oi 3

The TPG 262 is used together with Pfeiffer Vacuum

Compact Gauges (in this document referred to as

gauges) for total pressure measurement. All products

must be operated in accordance with their respective

Operating Instructions.

The scope of delivery consists of following parts:

1 TPG 262 Dual-Channel Measurement and Control

Unit

1 Power cord

1 Connector for control connection

4 Collar screws and plastic sleeves

2 Rubber feet

1 Rubber bar

1 Operating Instructions (this document)

1 Betriebsanleitung

DualGauge™ INFICON AG

FullRange™ INFICON GmbH

Intended Use

Scope of Delivery

Trademarks

4BG 805 196 BE / B (2004-08) TPG262.oi

Contents

Product Identification 2

Validity 2

Intended Use 3

Scope of Delivery 3

Trademarks 3

1 Safety 6

1.1 Symbols Used 6

1.2 Personnel Qualifications 7

1.3 General Safety Instructions 7

1.4 Liability and Warranty 8

2 Technical Data 9

3 Installation 14

3.1 Personnel 14

3.2 Installation, Setup 14

3.2.1 Rack Installation 14

3.2.2 Installation in a Control Panel 17

3.2.3 Use as Desk-Top Unit 18

3.3 Mains Power Connector 19

3.4 Gauge Connectors sensor 1, sensor 2 20

3.5 control Connector 21

3.6 relay Connector 22

3.7 Interface Connector RS232 23

4 Operation 24

4.1 Front Panel 24

4.2 Turning the TPG 262 On and Off 25

4.3 Operating Modes 26

4.4 Measurement mode 27

4.5 Parameter Mode 31

4.5.1 Switching Function Parameters 33

4.5.2 Gauge Parameters 38

4.5.3 Gauge Control 47

4.5.4 General Parameters 54

4.5.5 Test Parameters 58

BG 805 196 BE / B (2004-08) TPG262.oi 5

5 Communication (Serial Interface) 68

5.1 RS232C Interface 68

5.1.1 Data Transmission 68

5.1.2 Communication Protocol 70

5.2 Mnemonics 72

5.2.1 Measurement Mode 73

5.2.2 Parameter Mode 79

5.2.2.1 Switching Function Parameters 79

5.2.2.2 Gauge Parameters 80

5.2.2.3 Gauge Control 84

5.2.2.4 General Parameters 85

5.2.2.5 Test Parameters 86

5.2.3 Example 92

6 Maintenance 93

7 Troubleshooting 94

8 Repair 95

9 Storage 96

10 Disposal 96

Appendix 97

A: Conversion Tables 97

B: Default Parameter Settings 98

C: Firmware Update 99

D: Literature 102

E: Index 104

Declaration of Conformity 106

For cross-references within this document, the symbol

(→XY) is used, for cross-references to further docu-

ments, listed under "Literature", the symbol (→[Z]).

6BG 805 196 BE / B (2004-08) TPG262.oi

1 Safety

DANGER

Information on preventing any kind of physical injury.

WARNING

Information on preventing extensive equipment and

environmental damage.

Caution

Information on correct handling or use. Disregard can

lead to malfunctions or minor equipment damage.

The lamp/display is lit.

The lamp/display flashes.

The lamp/display is dark.

Press the key (example: PARA key).

Do not press any key.

1.1 Symbols Used

Symbols for residual

risks

Further symbols

BG 805 196 BE / B (2004-08) TPG262.oi 7

Skilled personnel

All work described in this document may only be car-

ried out by persons who have suitable technical train-

ing and the necessary experience or who have been

instructed by the end-user of the product.

Adhere to the applicable regulations and take the nec-

essary precautions for all work you are going to do and

consider the safety instructions in this document.

DANGER

Caution: mains voltage

Contact with live parts is extremely hazardous

when any objects are introduced or any liq-

uids penetrate into the unit.

Make sure no objects enter through the lou-

vers and no liquids penetrate into the equip-

ment.

Communicate the safety instructions to all other users.

1.2 Personnel

Qualifications

1.3 General Safety

Instructions

8BG 805 196 BE / B (2004-08) TPG262.oi

Pfeiffer Vacuum assumes no liability and the warranty

becomes null and void if the end-user or third parties

• disregard the information in this document

• use the product in a non-conforming manner

• make any kind of interventions (modifications, altera-

tions etc.) on the product

• use the product with accessories not listed in the cor-

responding product documentation.

1.4 Liability and

Warranty

BG 805 196 BE / B (2004-08) TPG262.oi 9

2 Technical Data

Voltage 90 … 250 VAC

Frequency 50 … 60 Hz

Power consumption ≤45 W

Overvoltage category II

Protection class 1

Connection European appliance connec-

tor IEC 320 C14

Temperature

storage

operation –20 … +65 °C

+ 5 … +50 °C

Relative humidity ≤80% up to +31 °C,

decreasing to 50% at +40 °C

Use indoors only

max. altitude 2000 m NN

Pollution degree II

Protection type IP30

Number 2

Compatible

Compact Gauges

Pirani

Pirani Capacitance

Cold Cathode

FullRange™ CC

Process Ion

FullRange™ BA

Capacitance

Piezo

TPR 261, TPR 265, TPR 280,

TPR 281

PCR 260

IKR 251, IKR 261, IKR 270

PKR 251, PKR 261

IMR 265

PBR 260

CMR 261 … CMR 275

APR 250 … APR 267

Number 2 (1 per channel)

sensor connector Amphenol C91B appliance

connector, female, 6-pole

(pin assignment →20)

Mains specifications

Ambiance

Compatible gauges

Gauge connections

10 BG 805 196 BE / B (2004-08) TPG262.oi

Voltage +24 VDC ±5%

Current 750 mA

Power 18 W

Fuse protection 900 mA with PTC element,

self-resetting after turning the

TPG 262 off or disconnecting

the gauge. The supply con-

forms to the requirements of a

grounded protective extra low

voltage (SELV-E according to

EN 61010).

Front panel

Remote control via 4 keys

via RS232C interface

Measurement ranges depending on gauges

(→[1] … [14])

Measurement error

gain error

offset error ≤0.01% F.S.

≤0.01% F.S.

Measurement rate 50 / s

Display rate 10 / s

Filter time constant

slow

normal (nor)

fast

1.2 s (fg= 0.13 Hz)

400 ms (fg= 0.4 Hz)

20 ms (fg= 8 Hz)

Measurement units mbar, Pa, Torr

Offset correction for linear gauges

–5 … 110% F.S.

Calibration factor for logarithmic gauges

0.10 … 9.99

for linear gauges

0.500 … 2.000

A/D converter resolution 0.001% F.S.

Gauge supply

Operation

Measurement values

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pfeiffer Vacuum Steuereinheit Handbücher

Pfeiffer Vacuum

Pfeiffer Vacuum EVB 16 P A Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum TVV 001 Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum HIPACE NEO Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum HISCROLL Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum DVB Series Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum EVB 160 PA Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum EVB Series Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum TPG 256 A Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum EVR 116 Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum EVB 016 PA Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum OmniControl Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum CENTERONE-TWO Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum UVH 040 CU Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum EVA 016 H Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum N Series Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum TPG 500 Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum RME 005 A Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum UDV 046 Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum BVML Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum AVA 016 Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum TCP 350 Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum UDV 146 Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum DCU 002 Bedienungsanleitung

Pfeiffer Vacuum

Pfeiffer Vacuum EVB Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung