Rockwell Automation Allen-Bradley 1756-ENBT Bedienungsanleitung

EtherNet/IP Modules

Catalog Numbers 1756-ENBT, 1756-EN2F, 1756-EN2T, 1756-EN2TP, 1756-EN2TPXT, 1756-EN2TR, 1756-EN2TXT,

1756-EN2TRXT, 1756-EN2TSC, 1756-EN3TR, 1756-EWEB, 1768-ENBT, 1768-EWEB, 1769-AENTR

Installation Instructions

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required

to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the

use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT

Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication ENET-IN002H-EN-P - August 2017 3

Table of Contents

Summary of Changes New and Updated Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Preface Download the Add-on Profiles and Firmware. . . . . . . . . . . . . . . . . . . . . 7

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 1

Install a 1756 EtherNet/IP

Communication Module

Installation Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Grounding Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Set the Network IP Address on a Module . . . . . . . . . . . . . . . . . . . . . . . 14

Determine Module Slot Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Install the Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connect the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Use the following information to wire the module. . . . . . . . . . . . 17

Connect the Module to an EtherNet/IP Network Via an RJ45

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connect the Module to an EtherNet/IP Network Via a Fiber

Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connect to the Module Via the USB Port . . . . . . . . . . . . . . . . . . . . . . . 19

Apply Chassis Power and Check Status Indicators . . . . . . . . . . . . . . . 19

Install or Remove the Module Under Power (RIUP) . . . . . . . . . . . . . 21

Chapter 2

Install a 1768 EtherNet/IP

Communication Module

Installation Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Grounding Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Set the Network IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Install the Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Mount the Module with Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Mount on a DIN Rail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Wire the Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Connect the Module to an EtherNet/IP Network via an RJ45

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Apply Chassis Power and Check Status Indicators . . . . . . . . . . . . . . . 30

Remove the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Chapter 3

Install a 1769 EtherNet/IP

Adapter

System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Example Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Installation Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Grounding Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Set the Network IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Install the Adapter in a 1769 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Adapter Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

System Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Mount the Adapter and I/O Modules . . . . . . . . . . . . . . . . . . . . . . . 41

4Rockwell Automation Publication ENET-IN002H-EN-P - August 2017

Table of Contents

Wire the Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Remove or Replace the Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Chapter 4

Set the Network IP Address Set the Network IP Address with the Rotary Switches . . . . . . . . 46

Set the Network IP Address with the BOOTP/DHCP Server . . . . 47

Use DHCP Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Set the Network IP Address with RSLinx Software or the Studio 5000™

Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Reset the Module IP Address to a Factory Default Value . . . . . . 54

Chapter 5

Configure a Workstation to

Operate on an EtherNet/IP

Network

Select the Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Configure the Ethernet Communication Driver . . . . . . . . . . . . . . . . . 56

Chapter 6

USB Communication Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Configure a Module Via the USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Set Up a USB Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Load Firmware Through a USB Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Appendix A

1756 EtherNet/IP Status

Indicators

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Appendix B

1768 EtherNet/IP Module Status

Indicators

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Appendix C

1769 EtherNet/IP Adapter Status

Indicators

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Appendix D

Fiber Cable and LC Connector Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Rockwell Automation Publication ENET-IN002H-EN-P - August 2017 5

Summary of Changes

This manual contains new and updated information.

New and Updated

Information

This table contains the changes made in this revision.

Topic Page

Added graphic of the 1756-EN2TP Parallel Redundancy Protocol Ethernet Communication Module. 19

Added content about the 1756-EN2TP module status indicators. 63

6Rockwell Automation Publication ENET-IN002H-EN-P - August 2017

Summary of Changes

Notes:

Rockwell Automation Publication ENET-IN002H-EN-P - August 2017 7

Preface

This manual describes how to install and start up EtherNet/IP module systems

with Logix5000™controllers.

Use this manual if you program applications that use an EtherNet/IP network

with one of these Logix5000 controllers:

•CompactLogix™

•ControlLogix®

Understand the following:

•Networking concepts

•How to the use Studio 5000™environment

•How to use RSLinx®Classic programming software

Download the Add-on

Profiles and Firmware

If a communication module has a later firmware revision than recognized in the

current version of the Logix Designer™ application, you must download the latest

firmware. When you download the Add-on Profile (AOP) for the module, it can

be recognized in the Controller Organizer.

Download the Add-on Profile and the latest module firmware from the Product

Compatibility and Download website at http://www.ab.com.

If the procedure is performed while the web pages are already enabled, they

continue to be enabled and the password is reset to the serial number of the

adapter.

Additional Resources For more information on the products that are described in this publication, use

these resources.

Resource Description

EtherNet/IP Modules Installation Instructions,

publication ENET-IN002

Provides information about how to complete these tasks with EtherNet/IP communication modules in

a Logix5000 control system:

•Install the module

•Configure initial application setup

•Troubleshoot application anomalies related to EtherNet/IP communication module use

EtherNet/IP Secure Communication User Manual,

publication ENET-UM003

Provides information on how to configure authentication, encryption, and firewalls, typical

architectures, and diagnostics for modules equipped with secure communication function.

Ethernet Design Considerations Reference Manual, publication ENET-RM002 Provides details about how to use EtherNet/IP communication modules with Logix5000 controllers

and communicate with other devices on the EtherNet/IP network.

EtherNet/IP Socket Interface Application Technique, publication ENET-AT002 Describes the socket interface that you can use to program MSG instructions. These instructions

communicate between a Logix5000 controller via an EtherNet/IP module and Ethernet devices that do

not support the EtherNet/IP application protocol. These include bar code scanners, RFID readers, or

other standard Ethernet devices.

EtherNet/IP Embedded Switch Technology Application Guide, publication

ENET-AP005

Provides details about how to install, configure, and maintain linear and Device Level Ring (DLR)

networks by using Rockwell Automation EtherNet/IP devices equipped with embedded switch

technology.

Troubleshoot EtherNet/IP Networks Application Technique, publication

ENET-AT003

Provides details about how to assign IP addresses to and how to troubleshoot EtherNet/IP networks

and devices.

8Rockwell Automation Publication ENET-IN002H-EN-P - August 2017

Preface

You can view or download publications at

http:/www.rockwellautomation.com/literature/. To order paper copies of

technical documentation, contact your local Allen-Bradley distributor or

Rockwell Automation sales representative.

EtherNet/IP Parallel Redundancy Protocol (PRP) Application Technique,

publication ENET-AT006

Provides details about how to install, and configure a Parallel Redundancy Protocol (PRP) networks by

using Rockwell Automation EtherNet/IP devices equipped with embedded switch technology.

EtherNet/IP Network Configuration User Manual, publication ENET-UM001 Describes how you can use EtherNet/IP communication modules with

your Logix5000 controller and communicate with various devices on the Ethernet network.

EtherNet/IP Media Planning and Installation Manual

This manual is available from the Open DeviceNet Vendor Association

(ODVA) at: http://www.odva.org.

Provides details about how to install, configure, and maintain linear and Device Level Ring (DLR)

networks by using Rockwell Automation® EtherNet/IP devices equipped with embedded switch

technology.

Resource Description

Rockwell Automation Publication ENET-IN002H-EN-P - August 2017 9

Preface

Notes:

10 Rockwell Automation Publication ENET-IN002H-EN-P - August 2017

Preface

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Steuereinheit Handbücher

Rockwell Automation

Rockwell Automation ControlLogix 1756 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Kinetix 6000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted TMR Expander Interface Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1734-IR2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation DeviceNet ArmorBlock A Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1734-232ASC Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guard I/O DeviceNet 1732DS-IB8 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 794-IRT8 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Micro800 Series Handbuch

Rockwell Automation

Rockwell Automation Trusted TMR 120 Bedienungsanleitung

Rockwell Automation

Rockwell Automation ControlLogix 1756-HYD02 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 2711P-RPA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Kinetix 5700 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 800G-XLS Z-EX Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted TMR Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance electric GV3000/SE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1718 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation 193-EGF Series Benutzerhandbuch

Rockwell Automation

Rockwell Automation 1797-IE8 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1734-OE4C Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MSR42 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley B Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster MSR41 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guard master 440F-C4000D Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung