Rockwell Automation Allen-Bradley 1512A Bedienungsanleitung

Medium Voltage Controllers Bulletin 1512A 800A

One-High Cabinet Standard and Arc Resistant Enclosure

Catalog Numbers 1512A, 1512AT, 1512DM, 1512M

User Manual

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to

familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,

and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required

to be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the

use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or

liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,

Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks ArcShield™, IntelliVAC™ Control, IntelliVAC™, IntelliVAC™ Plus not belonging to Rockwell Automation are property of their respective companies.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT

Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 1512A-UM102C-EN-P - November 2015 3

Summary of Changes

This manual contains new and updated information.

New and Updated

Information

This table contains the changes that are made to this revision.

Topic Page

Changed description for 1512DM and 1512M Bulletin Numbers 9

Modified figure Typical Structure Nameplate. 10

Modified figure Typical Unit Nameplate. 10

Modified figure Access to Power Bus from Side and Rear Cabinet Typical. 16

Modified information in Figure 14 for current transformer. 20

Modified figure Access to Low Voltage Compartments, Arc Resistant. 23

Added steps to Opening the Medium Voltage Door. 24

Added All MV doors must be securely bolted closed before the ArcShield latch

handles are rotated.

Added Important table. 26

Added Important table. 27

Added figures Low Voltage Panel, Access to Power Bus with Low Voltage Panel

Rotated, Removal Of Access Panel with Low Voltage panel Rotated, Removal of

Low Voltage Barriers, and Power Bus with Bottom Access Barrier Removed.

30 … 32

Modified Access Power Bus Front Access - Top Entry procedure. 30

Added Typical Ground Bus Splicing Configuration (Front View) illustration. 37

Modified Important table. 43

Added Attention table. 44

Modified figures Door Interlock Lever, Inspecting Isolation Switch in Open

position, Contactor Voltage Checkpoints, Isolation Switch Voltage, Removing the

Contactor Front View), Closing Contactor Manually (some parts not shown),

Isolation Switch Lubrication Points, Isolation Switch Grounding Adjustment,

Location of ISa and ISb Auxiliary Contacts, Adjusting Auxilary Contacts (ISa

Auxiliary Contacts shown).

44 … 57

Added part numbers 80178-750-51, 80158-147-52, PN-272006. 61

Increased the unit quantity of PN-272006 61

Added 50 kA to ArcShield™ Unit Information. 63

Added Attention and Warning Tables. 73

Added Attention and Warning Tables. 82

4Rockwell Automation Publication 1512A-UM102C-EN-P - November 2015

Summary of Changes

Notes:

Rockwell Automation Publication 1512A-UM102C-EN-P - November 2015 5

Table of Contents

Chapter 1

General Information

Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Starter Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Recommended Torque Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 2

Installation-StandardEnclosure(Not

Arc Resistant)

Door Opening Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Opening the Low Voltage Doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Opening the Medium Voltage Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Anchoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Joining the Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Access to the Power Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Rear Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Side Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Front Access – Top Incoming Load Cables . . . . . . . . . . . . . . . . . . . . . 17

Front Access – Bottom Incoming Line Cables . . . . . . . . . . . . . . . . . . 19

Load Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 3

Installation – Arc Resistant Enclosure

(ArcShield™)

Door Opening Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Opening the Low Voltage Doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Opening the Medium Voltage Doors. . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Anchoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Access Power Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Rear Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Side Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Front Access – Top Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Chapter 4

Common Installation

Bus Splicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Power Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Insulated Power Bus Splicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Ground Bus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Incoming Line Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Hi-Pot and Megger Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Start-up Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Vacuum Contactor Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Preliminary Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Testing the Contactor Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Chapter 5

Maintenance

Tool Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Door Interlock Circumvention. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Power Lockout Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

6Rockwell Automation Publication 1512A-UM102C-EN-P - November 2015

Table of Contents

Fuse Removal and Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Bolt-on Fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Bolt-on Fuse Removal and Installation . . . . . . . . . . . . . . . . . . . . . . . . . 49

Contactor Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Removing the Contactor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Contactor Interlock Rod Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Reduce the Gap Distance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Increase the Gap Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Isolation Switch Mechanism Inspection and Lubrication . . . . . . . . . . . . 53

Isolation Switch Mechanism Grounding Adjustment. . . . . . . . . . . . . . . . 54

Auxiliary Contacts Inspection and Replacement . . . . . . . . . . . . . . . . . . . . 55

Isolation Switch Auxiliary Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Adjusting the Normally Open (ISa) Contacts . . . . . . . . . . . . . . . . . . 57

Adjusting the Normally Closed (ISb) Contacts. . . . . . . . . . . . . . . . . . 58

Adjusting the Change of State Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Emergency Circumvention Procedure for Power Cell Entry . . . . . . 59

Chapter 6

Spare Parts

Spare Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Appendix A

ArcShield™ Unit Information

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

ArcShield Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Exhaust Systems: Chimney or Plenum Option . . . . . . . . . . . . . . . . . . . . . . 64

Plenum Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Plenum Exhaust Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Additional Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Chimney Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Chimney Exhaust Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Appendix B

ArcShield™ Plenum Installation

Instructions

Recommended Torque Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Plenum Bracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

General Plenum Layout for ArcShield Line-up. . . . . . . . . . . . . . . . . . . . . . 71

STEP 1 – Mounting a Single Plenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Cabinet Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Plenum Placement on Structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

STEP 2 – Alignment of “Side-by-Side” Plenums . . . . . . . . . . . . . . . . . . . . 74

STEP 3 – Sequence of Final Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

STEP 4 – Closing the Front of the Plenum Sections. . . . . . . . . . . . . . . . . 76

STEP 5 – Extension and Elbow Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 76

STEP 6 – Mounting Extension/Elbow to Plenum “Line-up” . . . . . . . . . 77

STEP 7 – Additional Mounting Support . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Rockwell Automation Publication 1512A-UM102C-EN-P - November 2015 7

Table of Contents

Appendix C

ArcShield™ Chimney Installation

Instructions

Recommended Torque Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

General Plenum Layout for ArcShield Line-up . . . . . . . . . . . . . . . . . . . . . 81

Cabinet Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Chimney Placement on Structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

8Rockwell Automation Publication 1512A-UM102C-EN-P - November 2015

Table of Contents

Notes:

Rockwell Automation Publication 1512A-UM102C-EN-P - November 2015 9

Chapter 1

General Information

Scope This document pertains to the Rockwell Automation® Bulletin 1512A medium

voltage (MV) controller. The Bulletin 1512A structure provides one complete

MV controller unit.

The product Bulletin numbers that are covered by this document are:

•1512A 800A FVNR controller

•1512AT 800A Transformer Feeder

This document can also be used as a reference guide for these Bulletin numbers:

•1512DM 800A (FVIO) Input Contactor with Output Isolator

•1512M 800A (FVOP) Output Bypass Controller

Starter Identification A nameplate is attached to the right-side flange of the structure (Figure 1). See

the nameplate for information such as series number, section number, NEMA

(National Electrical Manufacturers Association) enclosure type, unit ratings, and

bus ratings.

IMPORTANT

This document is used for all Bulletin 800 amp1512A unit types, including arc

resistant (ArcShield™) units. Important information specifically for ArcShield

units can be found in Appendix A, B, and C.

ATTENTION: See the information in Appendix A, B, and C to install and

maintain ArcShield arc resistant units. Failure to do so can negate the arc

resistant benefits that are provided by ArcShield, which exposes personnel to

risk of serious injury or death.

10 Rockwell Automation Publication 1512A-UM102C-EN-P - November 2015

Chapter 1 General Information

Figure 1 - Typical Structure Nameplate

A nameplate is also found in the low voltage compartment (see Figure 2) with

unit motor application information.

Figure 2 - Typical Unit Nameplate

Refer to these nameplates whenever you contact Rockwell Automation for

assistance. Be prepared to provide such information as series number, structure

series, unit series, diagram schematic, and catalog number.

Recommended Torque

Values

When you are installing components, or when assembling the cabinet, tighten

these bolt sizes to the specified torque values.

Table 1 - Torque Values

1/4 in. Hardware 6 lb•ft (8 N•m)

5/16 in. Hardware 12 lb•ft (15 N•m)

3/8 in. Hardware 20 lb•ft (27 N•m)

1/2 in. Hardware 48 lb•ft (65 N•m)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Controller Handbücher

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation CompactLogix series Bedienungsanleitung

Rockwell Automation

Rockwell Automation MPMA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Betriebsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley CompactLogix 1769-L32E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Logix 5000 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC Dialog Plus Bedienungsanleitung

Rockwell Automation

Rockwell Automation powerflex 4 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1756-L72EROMS Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix 1400 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation ArmorStart Bulletin 280G Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley CompactLogix 5370 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Dialog Plus 1503D Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1763-L16AWA Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix 1400 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley AADvance T9110 Handbuch

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 23PFC Betriebsanleitung

Rockwell Automation

Rockwell Automation Micro810 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation SmartGuard 600 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-50 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SMC-3 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch