Rockwell Automation Allen-Bradley MicroLogix 1400 Bedienungsanleitung

MicroLogix 1400

Programmable

Controllers

Bulletin1766Controllersand1762

Expansion I/O

User Manual

Important User Information

Solid state equipment has operational characteristics differing from those of

electromechanical equipment. Safety Guidelines for the Application,

Installation and Maintenance of Solid State Controls (publication SGI-1.1

available from your local Rockwell Automation sales office or online at

http://literature.rockwellautomation.com) describes some important

differences between solid state equipment and hard-wired electromechanical

devices. Because of this difference, and also because of the wide variety of

uses for solid state equipment, all persons responsible for applying this

equipment must satisfy themselves that each intended application of this

equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for

indirect or consequential damages resulting from the use or application of

this equipment.

The examples and diagrams in this manual are included solely for illustrative

purposes. Because of the many variables and requirements associated with

any particular installation, Rockwell Automation, Inc. cannot assume

responsibility or liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to

use of information, circuits, equipment, or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without

written permission of Rockwell Automation, Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware

of safety considerations.

Rockwell Automation, Allen-Bradley, SLC 5/02, SLC 5/03, PLC-5, MicroLogix, SLC 500, RSLogix, RSLinx, RSLogix 500, RSLogix

Micro, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

WARNING Identifies information about practices or circumstances that can cause

an explosion in a hazardous environment, which may lead to personal

injury or death, property damage, or economic loss.

IMPORTANT Identifies information that is critical for successful application and

understanding of the product.

ATTENTION Identifies information about practices or circumstances that can lead

to: personal injury or death, property damage, or economic loss.

Attentions help you identify a hazard, avoid a hazard, and recognize

the consequence.

SHOCK HAZARD Labels may be on or inside the equipment, such as a drive or motor, to

alert people that dangerous voltage may be present.

BURN HAZARD Labels may be on or inside the equipment, such as a drive or motor, to

alert people that surfaces may reach dangerous temperatures.

3Publication 1766-UM001A-EN-P - October 2008

Table of Contents

Preface

Who Should Use this Manual. . . . . . . . . . . . . . . . . . . . . . . . 11

Purpose of this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 12

Common Techniques Used in this Manual . . . . . . . . . . . . . . 12

Chapter 1

Hardware Overview

Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Component Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

MicroLogix 1400 Memory Module and Built-in Real-Time

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1762 Expansion I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Communication Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Communication Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 2

Installing Your Controller

Agency Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Compliance to European Union Directives . . . . . . . . . . . . . . 19

EMC Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Low Voltage Directive . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Installation Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . 20

Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Hazardous Location Considerations . . . . . . . . . . . . . . . . 22

Disconnecting Main Power. . . . . . . . . . . . . . . . . . . . . . . 23

Safety Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Power Distribution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Periodic Tests of Master Control Relay Circuit . . . . . . . . . 24

Power Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Isolation Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Power Supply Inrush . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Loss of Power Source. . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Input States on Power Down . . . . . . . . . . . . . . . . . . . . . 25

Other Types of Line Conditions . . . . . . . . . . . . . . . . . . . 25

Preventing Excessive Heat. . . . . . . . . . . . . . . . . . . . . . . . . . 26

Master Control Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Using Emergency-Stop Switches . . . . . . . . . . . . . . . . . . . 28

Schematic (Using IEC Symbols) . . . . . . . . . . . . . . . . . . . 29

Schematic (Using ANSI/CSA Symbols). . . . . . . . . . . . . . . 30

Installing a Memory Module . . . . . . . . . . . . . . . . . . . . . . . . 31

Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Connecting the Battery Wire Connector . . . . . . . . . . . . . 33

Controller Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . 34

Controller and Expansion I/O Spacing . . . . . . . . . . . . . . . . . 34

Mounting the Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

DIN Rail Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Publication 1766-UM001A-EN-P - October 2008

4Table of Contents

Panel Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

1762 Expansion I/O Dimensions . . . . . . . . . . . . . . . . . . . . . 38

Mounting 1762 Expansion I/O . . . . . . . . . . . . . . . . . . . . . . . 38

DIN Rail Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Panel Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Connecting Expansion I/O . . . . . . . . . . . . . . . . . . . . . . . . . 40

Chapter 3

Wiring Your Controller

Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Wiring Recommendation . . . . . . . . . . . . . . . . . . . . . . . . 41

Wire without Spade Lugs . . . . . . . . . . . . . . . . . . . . . . . . 42

Wire with Spade Lugs . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Using Surge Suppressors . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Recommended Surge Suppressors . . . . . . . . . . . . . . . . . 45

Grounding the Controller . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Terminal Block Layouts . . . . . . . . . . . . . . . . . . . . . . . . . 47

Sinking and Sourcing Wiring Diagrams . . . . . . . . . . . . . . . . 48

1766-L32BWA, 1766-L32AWA, 1766-L32BXB, 1766-L32BWAA,

1766-L32AWAA, 1766-L32BXBA Wiring Diagrams . . . . . . 49

Controller I/O Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Minimizing Electrical Noise. . . . . . . . . . . . . . . . . . . . . . . 51

Wiring Your Analog Channels . . . . . . . . . . . . . . . . . . . . . . . 51

Analog Channel Wiring Guidelines . . . . . . . . . . . . . . . . . 52

Minimizing Electrical Noise on Analog Channels . . . . . . . 53

Grounding Your Analog Cable . . . . . . . . . . . . . . . . . . . . 53

Expansion I/O Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Digital Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . 55

Analog Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Chapter 4

Communication Connections

Supported Communication Protocols . . . . . . . . . . . . . . . . . . 67

Default Communication Configuration . . . . . . . . . . . . . . . . . 68

Using the Communications Toggle Functionality . . . . . . . . . 68

Changing Communication Configuration. . . . . . . . . . . . . 69

Connecting to the RS-232 Port . . . . . . . . . . . . . . . . . . . . . . . 72

Making a DF1 Point-to-Point Connection . . . . . . . . . . . . 72

Using a Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Connecting to a DF1 Half-Duplex Network. . . . . . . . . . . 76

Connecting to a RS-485 Network . . . . . . . . . . . . . . . . . . . . . 79

DH-485 Configuration Parameters. . . . . . . . . . . . . . . . . . 79

Recommended Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

DH-485 Communication Cable . . . . . . . . . . . . . . . . . . . . 81

Publication 1766-UM001A-EN-P - October 2008

Table of Contents 5

Connecting the Communication Cable to the DH-485

Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Grounding and Terminating the DH-485 Network . . . . . . 83

Connecting the AIC+. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Cable Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Recommended User-Supplied Components. . . . . . . . . . . 88

Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Install and Attach the AIC+. . . . . . . . . . . . . . . . . . . . . . . 90

Powering the AIC+. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Connecting to DeviceNet. . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Cable Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Connecting to Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Ethernet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Chapter 5

Using the LCD

Operating Principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Startup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Main Menu and Default Screen. . . . . . . . . . . . . . . . . . . 100

Operating Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Using Menus to Choose Values. . . . . . . . . . . . . . . . . . . 102

Selecting Between Menu Items . . . . . . . . . . . . . . . . . . . 103

Cursor Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Setting Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

I/O Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Viewing I/O Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Monitor User Defined Target Files . . . . . . . . . . . . . . . . . . . 107

Target User Defined File Number (TUF) . . . . . . . . . . . . 107

Monitoring a Bit File . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Monitoring Integer Files . . . . . . . . . . . . . . . . . . . . . . . . 112

Monitoring Double Integer files . . . . . . . . . . . . . . . . . . 119

Monitor Floating point Files . . . . . . . . . . . . . . . . . . . . . 124

Monitor System Status Files . . . . . . . . . . . . . . . . . . . . . 125

Using the Mode Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Controller Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Changing Mode Switch Position . . . . . . . . . . . . . . . . . . 127

Using a User Defined LCD Screen . . . . . . . . . . . . . . . . . . . 128

User Defined LCD Screen. . . . . . . . . . . . . . . . . . . . . . . 129

Configuring Advanced Settings . . . . . . . . . . . . . . . . . . . . . 131

Changing Key In Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Key In Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Changing Key In Mode . . . . . . . . . . . . . . . . . . . . . . . . 132

Using Communications Toggle Functionality . . . . . . . . . . . 133

Ethernet Network Configuration . . . . . . . . . . . . . . . . . . . . 134

Viewing Ethernet Status . . . . . . . . . . . . . . . . . . . . . . . . 134

Configuring the IP Address. . . . . . . . . . . . . . . . . . . . . . 135

Publication 1766-UM001A-EN-P - October 2008

6Table of Contents

Configuring the Ethernet Port . . . . . . . . . . . . . . . . . . . . 139

Configuring Ethernet Protocol Setup . . . . . . . . . . . . . . . 142

Using Trim Pots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Trim Pot Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Changing Data Value of a Trim Pot. . . . . . . . . . . . . . . . 145

Trim Pot Configuration in LCD Function File. . . . . . . . . 147

Error Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Viewing System Information . . . . . . . . . . . . . . . . . . . . . . . 148

Viewing Fault Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Saving/Loading Communication EEPROM . . . . . . . . . . . . . 151

Saving communication EEPROM. . . . . . . . . . . . . . . . . . 151

Loading communication EEPROM. . . . . . . . . . . . . . . . . 152

LCD setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Configuring contrast value . . . . . . . . . . . . . . . . . . . . . . 154

Configuring the backlight . . . . . . . . . . . . . . . . . . . . . . . 155

Chapter 6

Using Real-Time Clock and

Memory Modules

Real-Time Clock Operation . . . . . . . . . . . . . . . . . . . . . . . . 159

Operation at Power-up and Entering a Run or Test Mode . .

159

Writing Data to the Real-Time Clock. . . . . . . . . . . . . . . 160

RTC Battery Operation . . . . . . . . . . . . . . . . . . . . . . . . . 160

Memory Module Operation . . . . . . . . . . . . . . . . . . . . . . . . 161

User Program , User Data, Datalog and Recipe Back-up 161

Program Compare . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

Data File Download Protection. . . . . . . . . . . . . . . . . . . 162

Memory Module Write Protection . . . . . . . . . . . . . . . . . 162

Removal/Insertion Under Power. . . . . . . . . . . . . . . . . . 162

Memory Module Information File . . . . . . . . . . . . . . . . . 162

Program /Data Download . . . . . . . . . . . . . . . . . . . . . . 163

Program /Data Upload . . . . . . . . . . . . . . . . . . . . . . . . . 163

Chapter 7

Online Editing

Directions and Cautions for MicroLogix 1400 Online

Editing User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

A Download is Required Before Starting Online Editing. 165

Types of Online Editing . . . . . . . . . . . . . . . . . . . . . . . . . . 166

Edit Functions in Runtime Online Editing . . . . . . . . . . . 167

Edit Functions in Program Online Editing . . . . . . . . . . . 167

Appendix A

Specifications

Specifications for Inputs . . . . . . . . . . . . . . . . . . . . . . 169

Specifications for Outputs in Hazardous Locations

(Class 1, Division 2, Groups A, B, C, D) . . . . . . . . . . . . 171

Publication 1766-UM001A-EN-P - October 2008

Table of Contents 7

SpecificationsforOutputsin(Non-Hazardous)Locationsonly

172

Working Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Expansion I/O Specifications . . . . . . . . . . . . . . . . . . . . . . . 177

Digital I/O Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . 177

Analog Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

-Appendix B

Replacement Parts

MicroLogix 1400 Replacement Kits. . . . . . . . . . . . . . . . . . . 193

Lithium Battery (1747-BA) . . . . . . . . . . . . . . . . . . . . . . . . 194

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

Battery Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

1762 Expansion I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

Expansion I/O Replacement Doors. . . . . . . . . . . . . . . . 198

Expansion I/O Replacement DIN Latches . . . . . . . . . . . 198

Expansion I/O Replacement Door Labels . . . . . . . . . . . 198

Appendix C

Troubleshooting Your System

Understanding the Controller Status Indicators . . . . . . . . . . 199

Controller Status LED Indicators . . . . . . . . . . . . . . . . . . 199

Status Indicators on the LCD . . . . . . . . . . . . . . . . . . . . 200

I/O Status Indicators on the LCD . . . . . . . . . . . . . . . . . 201

Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

Error Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202

Controller Error Recovery Model . . . . . . . . . . . . . . . . . . . . 203

Analog Expansion I/O Diagnostics and Troubleshooting. . . 204

Module Operation and Channel Operation . . . . . . . . . . 204

Power-up Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . 204

Critical and Non-Critical Errors . . . . . . . . . . . . . . . . . . . 205

Module Error Definition Table . . . . . . . . . . . . . . . . . . . 205

Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Calling Rockwell Automation for Assistance . . . . . . . . . . . . 208

Appendix D

Using ControlFlash to Upgrade

Your Operating System

Preparing for Firmware Upgrade . . . . . . . . . . . . . . . . . . . . 209

Install ControlFlash Software . . . . . . . . . . . . . . . . . . . . 209

Prepare the Controller for Firmware Upgrade . . . . . . . . 210

Using ControlFlash for Firmware Upgrade . . . . . . . . . . . . . 211

ControlFlash Error Messages . . . . . . . . . . . . . . . . . . . . . . . 221

Missing or Corrupt OS state . . . . . . . . . . . . . . . . . . . . . . . . 223

Recovering from Missing or Corrupt OS State . . . . . . . . 224

Publication 1766-UM001A-EN-P - October 2008

8Table of Contents

Appendix E

Connecting to Networks via

RS-232/RS-485 Interface

RS-232 Communication Interface . . . . . . . . . . . . . . . . . . . . 225

RS-485 Communication Interface . . . . . . . . . . . . . . . . . . . . 225

DF1 Full-Duplex Protocol . . . . . . . . . . . . . . . . . . . . . . . . . 225

DF1 Half-Duplex Protocol . . . . . . . . . . . . . . . . . . . . . . . . . 226

DF1 Half-Duplex Operation . . . . . . . . . . . . . . . . . . . . . 227

Considerations When Communicating as a DF1 Slave

on a Multi-drop Link . . . . . . . . . . . . . . . . . . . . . . . . . . 228

Using Modems with MicroLogix Programmable Controllers .

229

DH-485 Communication Protocol. . . . . . . . . . . . . . . . . . . . 231

DH-485 Configuration Parameters. . . . . . . . . . . . . . . . . 231

Devices that use the DH-485 Network . . . . . . . . . . . . . 232

Important DH-485 Network Planning Considerations. . . 232

Example DH-485 Connections . . . . . . . . . . . . . . . . . . . 237

Modbus Communication Protocol . . . . . . . . . . . . . . . . . . . 239

ASCII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Distributed Network Protocol (DNP3) . . . . . . . . . . . . . . . . 239

Appendix F

Micrologix 1400 Distributed

Network Protocol (DNP3)

Channel Configuration for DNP3 Slave. . . . . . . . . . . . . . . . 241

Channel 0 and Channel 2 Link Layer Configuration

Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245

DNP3 Slave Application Layer Configuration Parameters 248

DNP3 Slave Application Layer . . . . . . . . . . . . . . . . . . . . . . 254

Function Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254

Internal Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . 258

DNP3 Objects and MicroLogix 1400 Data Files . . . . . . . . . . 259

DNP3 Binary Input Object . . . . . . . . . . . . . . . . . . . . . . 264

DNP3 Binary Output Object . . . . . . . . . . . . . . . . . . . . . 266

DNP3 Double Bit Binary Input Object . . . . . . . . . . . . . 270

DNP3 Counter Object. . . . . . . . . . . . . . . . . . . . . . . . . . 272

DNP3 Frozen Counter Object . . . . . . . . . . . . . . . . . . . . 275

DNP3 Analog Input Object. . . . . . . . . . . . . . . . . . . . . . 278

DNP3 Analog Output Object . . . . . . . . . . . . . . . . . . . . 282

DNP3 BCD Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284

Object Quality Flags. . . . . . . . . . . . . . . . . . . . . . . . . . . 286

DNP3 Device Attribute Object . . . . . . . . . . . . . . . . . . . . . . 288

Event Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296

Generating Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296

Control Generating Event . . . . . . . . . . . . . . . . . . . . . . . 300

Reporting Event By Polled Response . . . . . . . . . . . . . . 302

Reporting Event By Unsolicited Response . . . . . . . . . . . 303

Collision Avoidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

Time Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306

Publication 1766-UM001A-EN-P - October 2008

Table of Contents 9

Download a User Program via DNP3 Network . . . . . . . . . . 307

Default Directories and Files. . . . . . . . . . . . . . . . . . . . . 308

Generating *.IMG file using RSLogix 500/RSLogix Micro. 308

Rules for File Authentication. . . . . . . . . . . . . . . . . . . . . 310

Rules for Downloading a User Program . . . . . . . . . . . . 311

Rules for Uploading a User Program. . . . . . . . . . . . . . . 312

Rules for Initializing a User Program. . . . . . . . . . . . . . . 313

Rules for uploading Communication Status Files . . . . . . 313

Starting and Stopping User Programs (Mode Change) via

DNP3 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313

Initialize User Program. . . . . . . . . . . . . . . . . . . . . . . . . 314

Start User Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315

Stop User Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . 315

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315

Function Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320

Implementation Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322

Appendix G

Connecting to Networks via

Ethernet Interface

MicroLogix 1400 Controllers and Ethernet Communication . 331

MicroLogix 1400 Performance Considerations. . . . . . . . . . . 332

MicroLogix 1400 and PC Connections to the

Ethernet Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333

Ethernet Network Topology . . . . . . . . . . . . . . . . . . . . . 333

Connecting an Ethernet switch on the Ethernet Network 333

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334

Ethernet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336

Duplicate IP address Detection. . . . . . . . . . . . . . . . . . . . . 337

Configuring the Ethernet Channel on the MicroLogix 1400 . 338

Configuration Using RSLogix 500/RSLogix Micro Programming

Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340

Configuration Via BOOTP . . . . . . . . . . . . . . . . . . . . . . . . . 340

Using the Rockwell BOOTP/DHCP Utility. . . . . . . . . . . 341

Using a DHCP Server To Configure Your Processor . . . . . . 343

Using Subnet Masks and Gateways . . . . . . . . . . . . . . . . . . 344

Manually Configuring Channel 1 for Controllers on

Subnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345

MicroLogix 1400 Embedded Web Server Capability . . . . . . 346

Appendix H

System Loading and Heat

Dissipation

System Loading Calculations. . . . . . . . . . . . . . . . . . . . . . . 347

System Loading Example Calculations . . . . . . . . . . . . . 348

System Loading Worksheet . . . . . . . . . . . . . . . . . . . . . . . . 350

Current Loading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350

Calculating Heat Dissipation . . . . . . . . . . . . . . . . . . . . . . . 352

Publication 1766-UM001A-EN-P - October 2008

10 Table of Contents

Glossary

Index

Andere Handbücher für Allen-Bradley MicroLogix 1400

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Controller Handbücher

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ARMORSTART Bedienungsanleitung

Rockwell Automation

Rockwell Automation ics triplex AADvance Handbuch

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1763-L16AWA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Micro800 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley CompactLogix 1769-L32E Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L23E-QB1B Bedienungsanleitung

Rockwell Automation

Rockwell Automation MicroLogix 1500 Bedienungsanleitung

Rockwell Automation

Rockwell Automation CompactLogix series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1756-L72EROMS Bedienungsanleitung

Rockwell Automation

Rockwell Automation SLC 500 Thermocouple Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1766-L32AWA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 2080-LC20 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1769 CompactLogix Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1756-L1 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 150-E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix 1400 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation powerflex 4 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Micro810 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley AADvance T9110 Handbuch

Rockwell Automation

Rockwell Automation Allen-Bradley GuardLogix 5580 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 7000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch