Rosewill RC-400 Bedienungsanleitung

Gigabit PCI LAN Card RC400-LX

User Manual

Gigabit PCI Card RC400-LX User Manual

Features and Benefits

zIntegrated 10/100/1000 transceiver

zSupports PCI 2.2, 32 bit bus, 33/66MHz

zFully compliant with IEEE 802.3 (10Base-T Ethernet), IEEE 802.3u

(100Base-TX Fast Ethernet), IEEE 802.3z (1000Base-T Gigabit

Ethernet)

zSupports Ethernet 10Mbps (half-duplex), Ethernet 20Mbps

(full-duplex), Fast Ethernet 100Mbps (half-duplex), Fast Ethernet

200Mbps (full-duplex), Gigabit 1000Mbps (full-duplex) and Gigabit

2000Mbps (full-duplex)

zLEDs indicator for 1000Link/Activity(green) and

100Link/Activity(green)

zCrossover Detection & Auto-Correction

zSupport Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit

Package Contents

z1 x Gigabit Ethernet PCI Card

z1 x User Manual

z1 x Driver CD

System Requirements

zWindows® 2000, XP/2003 32/64 bit, Vista 32/64 bit

zPentium or equivalent PC with an available PCI slot

zCAT5/CAT5E/CAT6 UTP/STP cable

Gigabit PCI Card RC400-LX User Manual

Hardware Installation

Follow the instruction given below to install the Gigabit Ethernet PCI

Card.

1. Turn your computer off and remove the power plug from the plug

socket.

2. Remove the cover from the computer case.

3. Remove the metal cover plate on the rear of a free PCI slot.

4. Insert the card into one free PCI slot and screw it firmly on the bracket

side.

5. Place the cover back onto the computer.

6. Insert the plug into plug socket.

Driver Installation

For Windows® 2000/XP/Server 2003

Once the Windows® 2000, XP and Server 2003 startup. Gigabit Ethernet

PCI Card will be detected by system. Following is the procedures for

installing Gigabit Ethernet PCI Card driver under Windows® XP Service

Pack 2 operating system.

1. When Found New Hardware Wizard Window pop-up, please click

“Cancel” button to cancel the driver installation for the device at this

moment. The driver for this device will be installed in the next step.

2. Please insert the CD driver bound with Gigabit Ethernet PCI Card into

your CD-ROM Drive.

3. At the Windows desktop click Start, then Run.

4. Ty p e D:\ RC400-LX \Setup.exe, then click OK. (Change D: to match

your CD-ROM drive letter)

5. Follow the on-screen instructions to complete the installation.

6. Restart Windows to complete the installation.

Gigabit PCI Card RC400-LX User Manual

For Windows® Vista

In Windows® Vista, when the system is booted up it automatically

detects the Gigabit Ethernet PCI Card and install the Gigabit Ethernet

PCI Card with in-build drivers. Following is the procedures for upgrading

Gigabit Ethernet PCI Card driver under Windows® Vista operating

system.

1. Please insert the CD driver bound with Gigabit Ethernet PCI Card into

your CD-ROM Drive.

2. At the Windows desktop click Start, then Run.

3. Ty p e D:\ RC400-LX \setup.exe, then click OK. (Change D:\ to match

your CD-ROM drive letter)

4. Follow the on-screen instructions to complete the instructions to

complete the installation to complete the installation.

5. Restart Windows to complete the installation.

Verify Driver Installation

Click on the “Device Manager” tab in System Properties, which you

access from the Windows Control Panel. You should see a “Realtek

RTL8169/8110 Family Gigabit Ethernet NIC” (Windows®

2000/XP/Server 2003) or a “Realtek RTL8169/8110 Family PCI Gigabit

Ethernet NIC (NDIS 6.0)” (Windows® Vista) installed under “Network

adapters” item.

START > Control Panel > System > Device Manager

Gigabit PCI Card RC400-LX User Manual

Networking Settings

1. Click “Network Connection” in Control Panel to set your network

settings.

2. Right-click the Local Area Connection used by the Gigabit Ethernet

PCI Card, then select “Properties” from the pop-up menu.

3. Double-click the “Internet Protocol (TCP/IP)” item to set network

settings.

4. Right-click the Local Area Connection used by the Gigabit Ethernet

PCI Card, then select “Status” from the pop-up menu. You can affirm

network status.

Troubleshooting

The computer can not detect the Gigabit Ethernet PCI Card

1. Make sure that the Gigabit Ethernet PCI card is correctly plugged into

the PCI slot; if not, turn off the computer and plug it again.

2. If the Gigabit Ethernet PCI card is plugged in correctly, see if the

golden connectors on the card are clean; if not, clean the connector

surface.

3. If still not, please change another PCI slot on your motherboard.

4. Please upgrade your motherboard BIOS to the latest version. If it sill

not work, contact your motherboard vendor asking the advanced

supporting for BIOS updated.

5. The board itself might be defective. You can try another motherboard

testing Gigabit Ethernet PCI card working or not.

Computer failed to start after inserting Gigabit Ethernet PCI Card

Turn off the computer, remove the Gigabit Ethernet PCI card, and try to

restart the computer. If the computer starts successfully, it means that

Gigabit PCI Card RC400-LX User Manual

this card has not been inserted into the PCI slot correctly. Please insert

the card firmly into the PCI slot or try another slot.

How to deal with an exclamation point on Ethernet Host controller

1. Please shutdown your computer and move the card to another

available slot then re-install Gigabit Ethernet PCI Card driver again.

2. Please point on this device then right-check on the mouse.

3. This exclamation point usually means there is a resource conflict

between the Gigabit Ethernet PCI Card and another card in your

system. Please move the card to another available slot. Restart your

computer. Windows will then re-configure itself and re-assign

resources. Check your device manager again. If the exclamation point

is still there then repeat the process until it no longer appears.

I can not use Gigabit Ethernet transfer speed

1. Please affirm your Ethernet environment supporting Gigabit structure.

2. Please use CAT6 UTP/STP cable.

How to configure 10/100/1000Mbps Ethernet structure

Connect 10/100/1000Mbps Ethernet over unshielded twisted pair (UTP)

cable. Gigabit Ethernet PCI card has the ability of automatic sensing and

operating on either speed without manual reconfiguration.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future

support for your product.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rosewill PCI-Karte Handbücher

Rosewill

Rosewill RC-304 Bedienungsanleitung

Rosewill

Rosewill RC500 Bedienungsanleitung

Rosewill

Rosewill RC304 Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Rosewill

Rosewill RC-100 Bedienungsanleitung

Rosewill

Rosewill RC-223 Bedienungsanleitung

Rosewill

Rosewill RC-209 Bedienungsanleitung

Rosewill

Rosewill RC-510 Bedienungsanleitung

Rosewill

Rosewill RC304-E Bedienungsanleitung

Rosewill

Rosewill RC210 Bedienungsanleitung

Rosewill

Rosewill RSV-S4-6G Bedienungsanleitung

Rosewill

Rosewill RC205 Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Rosewill

Rosewill RC303 Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Rosewill

Rosewill RC-303 Bedienungsanleitung

Rosewill

Rosewill RC-209-EX Bedienungsanleitung

Rosewill

Rosewill RC503 Bedienungsanleitung

Rosewill

Rosewill RC-305E Bedienungsanleitung

Rosewill

Rosewill RNX-N300X Bedienungsanleitung

Rosewill

Rosewill RNWD-N9003 PCE Bedienungsanleitung

Rosewill

Rosewill RC-101 Bedienungsanleitung

Rosewill

Rosewill RC214 Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung