Tennsco BK6-121812-1 Bedienungsanleitung

PK-1110319

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

Three Wide Unassembled Five or Six High

Box Locker Units With or Without Legs

RETAIN INSTRUCTIONS FOR FUTURE REFERENCERETAIN INSTRUCTIONS FOR FUTURE REFERENCE

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

GENERAL SAFETY INFORMATIONGENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance on units.

LIMITED WARRANTYLIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in

the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

ASSEMBLY OF THREE WIDE BOX LOCKERS

Tools Needed: A provided 11/32” nut driver (11/32” socket may be substituted).

Two people are recommended for assembly. Approximate assembly time: 40-50 minutes.

5. Next bolt the right side (Ref. No. 6) to the back so that the

side ange ts around the back. Also attach to the top,

bottom and shelves. Use twenty three bolts and nuts (for a

unit without legs) to complete this step.

2. Unpack all the parts then locate the left and right hand sides

and separate them. The top of the sides and back can be

determined by the three holes closest to the end of the part.

1. The reference numbers used throughout this sheet refer to the

illustration on the back cover. This is to help you to identify the

various parts as they are mentioned.

3. Place back (Ref. No. 1) on a protected at surface so that the

anges face upward. Keep all parts level and square during

assembly. Make sure all the parts are aligned properly before

tightening the bolts and nuts (Ref. No. 13). Bolt the left side

(Ref. No. 2) to the back so that the side ange ts around the

back using seven nuts and bolts (nuts to the inside); use nine

bolts and nuts if the locker does not have legs.

6. If the locker has legs, insert the leg into the corner between

the bottom and the side. Bolt the leg to the side using two

bolts and nuts per leg.

If leg version, do not

bolt through bottom

two holes yet.

Top portion

⁭⁭

4. Bolt the shelves (Ref. No. 4), top and bottom (Ref. No. 5) to the

back and left side panel using four nuts and bolts each. Next

bolt an intermediate side and back panel to the ange on the

back of the rst locker in seven places (nine if no legs). Next

attach a top, bottom, and shelves to the rst intermediate side

and back. These will share bolts with the parts on either side of

them as shown in detail view. Next attach remaining

intermediate side and back to the ange of the second back.

Attach the remaining top, bottom, and shelves to the

intermediate side.

⁭⁭

Intermediate Side

Left Side

Top

Bottom

Shelf

Right Side

⁭⁭

9. Stand the unit upright and place in the desired location.

Remove temporary bolts in frames and bolt to adjacent units

together through frames.

10. Anchor units to wall or oor. The units are not intended to

stand free and may topple if not secured. Units standing

back to back should be bolted back to back.

8. If joining a three wide unit beside another unit, temporarily

install only one bolt and nut into the third and sixth holes down

from the top of the outer frame(s) that will be joined to the

adjacent locker frame(s). The center locker frame can be bolted

complete. If the locker is just a stand alone three wide unit,

nish attaching the rames using thirty eight bolts and nuts.

Check and tighten all permanent bolts.

NOTE: If the temporary bolts are not removed

before the frames are joined side by side, the

frames will have a 1/8“ gap between them.

7. Place the frame and door assembly (Ref. Nos. 7 & 8) over the

locker body. Make certain that the body sides are inside the

frames not between the frames. Attach the top to the frame

header and the bottom to the frame sill using one bolt each.

11. If units are not pre-numbered, optional number plates and

plastic covers (Ref. No. 9) may be attached using push plugs

(Ref. No. 10). Tennsco name plate (Ref. No. 18) is installed at

the factory. As an alternative, custom number or name plates

may be ordered from the factory. Your locker is complete.

NOTE: Care must be taken to assure that lockers

are set plumb and level before anchoring.

12. If additional accessories were purchased such as End Bases/

Front Bases (for lockers with legs), Closed Bases (for lockers

without legs), Slopping Tops, and/or Combination Locks or

Grooved Key Locks, please see the instructions that came

along with those parts.

Header Bolt Hole

Frame Header

Frame

Sill

⁭⁭

Door & Frame Assembly

REPLACEMENT PARTSREPLACEMENT PARTS

⁭⁭

Tennsco Nut DriverTennsco Nut Driver

(Ref No. 12)(Ref No. 12)

BackBack

(Ref No. 1)(Ref No. 1)

Left SideLeft Side

(Ref No. 2)(Ref No. 2)

QTY. 6 TIERQTY. 6 TIER

DESCRIPTIONDESCRIPTION

*These items are included in the hardware pack enclosed (Part No.: HWBK5-3 for 5 tier/ HWBK6-3 for 6 tier).

QTY. 5 TIERQTY. 5 TIER

Door Frame assemblies require a further sufx (x) of either 1 or A. “1” indicates frame with legs; “A” indicates frame without legs. For example: A door frame assembly Door Frame assemblies require a further sufx (x) of either 1 or A. “1” indicates frame with legs; “A” indicates frame without legs. For example: A door frame assembly

for locker BK6-121812-1 (with legs) would be Part No. LBFA-1272-1. The door assembly alone without the frame for the same locker would be Part No. LBD-1212.for locker BK6-121812-1 (with legs) would be Part No. LBFA-1272-1. The door assembly alone without the frame for the same locker would be Part No. LBD-1212.

REF. NO.REF. NO.

Rear LegsRear Legs

(Ref No. 3)(Ref No. 3)

Right SideRight Side

(Ref No. 6)(Ref No. 6)

ShelfShelf

(Ref No. 4)(Ref No. 4)

Door Frame AssemblyDoor Frame Assembly

(Ref No. 7)(Ref No. 7)

Locker DoorLocker Door

(Ref No. 8)(Ref No. 8)

Part No. is composed of prex shown plus combination of opening or unit. Width = ww and Depth = dd.Part No. is composed of prex shown plus combination of opening or unit. Width = ww and Depth = dd.

Finger PullFinger Pull

(Ref No. 11)(Ref No. 11)

TopTop

(Ref No. 5)(Ref No. 5)

Number Plate andNumber Plate and

Clear CoverClear Cover

(Ref No. 9)(Ref No. 9)

Push PlugsPush Plugs

(Ref No. 10)(Ref No. 10)

⁭⁭

NOTE: Additional hardware may be included for replacement purposes.NOTE: Additional hardware may be included for replacement purposes.

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.

However, should your unit contain missing or damaged parts, please contact your purchase location.However, should your unit contain missing or damaged parts, please contact your purchase location.

49B11149B111

PART NO.PART NO.

Back

Left Side

Rear Leg (leg version unit only)

Shelf

Top/Bottom

Right Side

Door Frame Assembly

Locker Door

Paper Number Plate and Clear Cover*

Push Plug*

Finger Pull

Tennsco Nut Driver*

Bolts and Nuts #8-32 x ½”(not shown)*

136

144

LSTB-wwhh

LBSL-ddhh

LRL-1

ESL-wwdd

LTB-wwdd

LBSR-ddhh

LBFA-wwhh-x

LB-wwhh

LNP-1

LPP-1

LFP-1

TOOL-2

**Available Locally

BottomBottom

(Ref No. 5)(Ref No. 5)

⁭⁭

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco 1-Wide Welded Base for Lockers without Legs Bedienungsanleitung

Tennsco

Tennsco MB-1-2542-MGY Bedienungsanleitung

Tennsco

Tennsco DWR-6618 Bedienungsanleitung

Tennsco

Tennsco Sliding Door Jumbo Storage Cabinet JSD2478SU Bedienungsanleitung

Tennsco

Tennsco 1870 Bedienungsanleitung

Tennsco

Tennsco 7218 Bedienungsanleitung

Tennsco

Tennsco CINCO NIVELES Bedienungsanleitung

Tennsco

Tennsco 1442 Bedienungsanleitung

Tennsco

Tennsco Enclosed Foreman’s Desk Bedienungsanleitung

Tennsco

Tennsco JUMBO Gebrauchsanweisung

Tennsco

Tennsco ZA7-4824S-4D Bedienungsanleitung

Tennsco

Tennsco ESPC-1236 Bedienungsanleitung

Tennsco

Tennsco Z-Line Steel Shelf Unit Bedienungsanleitung

Tennsco

Tennsco 1436 Bedienungsanleitung

Tennsco

Tennsco MB-2-2542 Bedienungsanleitung

Tennsco

Tennsco WBHC-1516-MGY Bedienungsanleitung

Tennsco

Tennsco J1842A-N Bedienungsanleitung

Tennsco

Tennsco J1878A-N-W Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet CVD7214 Bedienungsanleitung

Tennsco

Tennsco ZL7 Series Bedienungsanleitung

Tennsco

Tennsco L&T Hinged Door Kit Bedienungsanleitung

Tennsco

Tennsco 1470 Bedienungsanleitung

Tennsco

Tennsco 7224 Bedienungsanleitung

Tennsco

Tennsco BCD18-72 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung