Timberwolf TW 280HB Bedienungsanleitung

C190-0500 - Rev 1.0 EN

TW 280HB (Hybrid) Wood Chipper

INSTRUCTION MANUAL

(Original Instructions)

Published on: 01/09/2022

Document ID: C190-0500 - Revision 1.0

Contact address

Timberwolf Ltd

Entec House

Tomo Industrial Estate

Stowmarket

Suffolk

IP14 5AY

United Kingdom

Website

English timberwolf-uk.com

French timberwolf.fr

German timberwolf-hacksler.de

Dutch timberwolf-houtversnipperaar.nl

Australian timberwolfchippers.com.au

Contains information owned by Timberwolf and/or its affiliates. Do not copy, store, transmit or disclose to any

third party without prior written permission from Timberwolf.

Other product and company names may be trademarks or registered trademarks of other companies, and

are the property of their owners. They are used only for explanation, without intent to infringe.

C190-0500 - Rev 1.0 EN 1/72

Contents

1 Introduction 5

1.1 Thank you for choosing Timberwolf 5

1.2 Important Health and Safety Information 5

1.3 Warning or Caution Symbols 6

1.4 Hazardous Materials 6

1.5 Purpose 6

2 Product Details 7

2.1 Specification 7

2.2 Location of Parts 8

2.2.1 Parts Locator 1 8

2.2.2 Parts Locator 2 9

2.2.3 Parts Locator 3 10

2.2.4 Parts Locator 4 11

2.2.5 Parts Locator 5 12

2.3 Tool Box 12

2.4 Safety Decals 13

2.5 Instruction Decals 14

2.6 Model Decals 16

2.7 Identification Plate 17

2.8 Guards 17

3 Safety Notes and Warnings 19

3.1 Safety Notices 19

3.2 Operator's Personal Protective Equipment (PPE) 19

3.3 Basic Woodchipping Safety 20

3.4 Operating Safely - You MUST 21

3.5 Operating Safely - You MUSTNOT 22

3.6 Noise Emissions 23

4 Towing and Handling 25

4.1 Safe Transportation 25

TW 280HB (Hybrid)

4.2 Hitching to the Towing Vehicle 25

4.3 Unhitching from the Towing Vehicle 26

4.4 Stabilising the Chipper 27

5 Operating Instructions 29

5.1 Manual Controls 29

5.2 No Stress Control 30

5.3 Emergency Stopping 30

5.4 Discharge Controls 31

5.5 Engine Controls 32

5.6 Checks Before Starting 32

5.7 Starting the Engine 33

5.8 Controlling the Engine Speed 33

5.9 In-feed and Safety Tests 34

5.10 Chipping 35

5.11 Working in Dusty Conditions 36

5.12 Stopping the Engine 36

5.13 Blockages 36

5.14 Blade Wear 37

5.15 Check Hydraulic Oil Level 37

5.16 Check Fuel Level and Refuel 38

5.17 Troubleshooting 39

5.18 Fault Codes 40

5.18.1 Engine Fault Codes 40

5.18.2 Wood Chipper Fault Codes 40

5.18.3 Hybrid Fault Codes 43

6 Maintenance Instructions 45

6.1 Safe Maintenance 45

6.2 Hybrid Safety 46

6.2.1 Super Capacitors 46

6.3 Routine Servicing 47

6.3.1 Daily Servicing 47

6.4 Spares 47

2/72 C190-0500 - Rev 1.0 EN

TW 280HB (Hybrid)

C190-0500 - Rev 1.0 EN 3/72

6.5 Engine Servicing 48

6.6 Safe Lifting of the Chipper 48

6.7 Battery Safety Information 49

6.8 Check and Replace Fasteners 51

6.9 Change Blades 52

6.10 Adjust Rotor Drive Belt Tension 54

6.11 Adjust Hydraulic Pump Drive Belt Tension 54

6.12 V-Belt Tensioning Procedure 55

6.13 Change Hydraulic Oil and Filter 57

6.14 Check Hoses 57

6.15 Grease the Discharge Tube Mounting Flanges 58

6.16 Grease the Roller Box Slides 58

6.17 Grease the Roller Splines and Rotor Bearings 59

7 Electrical System 61

7.1 Fuses and Relays - 12v 61

7.2 Fuses and Relays - 48v 62

8 Hydraulic System 63

9 Storage 65

9.1 Preparing for Storage 65

9.2 Storage Conditions 65

9.3 3-Monthly Storage Checks 65

9.4 6-Monthly Storage Checks 65

9.5 12-Monthly Storage Checks 66

9.6 Recommissioning after Storage 66

10 Dismantling and Disposal 67

11 Declaration of Conformity 69

12 Notes 71

TW 280HB (Hybrid)

4/72 C190-0500 - Rev 1.0 EN

TW 280HB (Hybrid)

THIS PAGE INTENTIONALLY LEFT BLANK

C190-0500 - Rev 1.0 EN 5/72

1 Introduction

1.1 Thank you for choosing Timberwolf

Timberwolf wood chippers are designed to give safe and dependable service if operated

in accordance with the instructions.

This manual should be considered an important part of the machine and should

remain with it if the machine is resold.

This manual covers the operation and maintenance of the Timberwolf TW 280HB

(Hybrid). All information in this manual is based on the latest product information

available at the time of purchase.

All the information you need to operate the machine safely and effectively is contained

within this manual.

Ensure that all operators are properly trained for operating the TW 280HB (Hybrid),

especially in safe working practices.

Timberwolf's policy of regularly reviewing and improving our products may involve major

or minor changes to this TW 280HB (Hybrid) or its accessories. Timberwolf reserves the

right to make changes at any time without notice and without incurring any obligation.

Due to improvements in design and performance during production, there may be, in

some cases, minor discrepancies between the actual TW 280HB (Hybrid) and the text in

this manual.

All TW 280HB (Hybrid) chippers have a full pre-delivery inspection before leaving the

factory and are ready to use.

1.2 Important Health and Safety Information

Before using your new chipper, please take time to read this manual. Failure to do so

could result in:

• personal injury.

• equipment damage.

• damage to property.

• 3rd party injuries.

TW 280HB (Hybrid)

1.3 Warning or Caution Symbols

Be aware of these symbols and where shown, carefully follow the instructions.

These symbols indicate important safety messages in this manual. When you see these

symbols, be alert to the possibility of injury to yourself or others and carefully read the

message that follows.

Always follow safe operating and maintenance practices.

1.4 Hazardous Materials

The following hazardous materials are present within the TW 280HB (Hybrid):

• Engine oil • Battery acid • Diesel

• Grease • Hydraulic oil • Copper Ease

• Loctite • Coolant • Magnets

(Environmental

impact only)

• High density electronic components

MATERIAL SAFETY DATA SHEETS FOR THESE HAZARDOUS MATERIALS ARE

AVAILABLE ON REQUEST. REFER TO THESE FOR FIRST AID AND FIRE

PROTECTION MEASURES.

Always follow recommended procedures for safe handling, removal and disposal of

hazardous materials. Safety precautions should be taken when handling hazardous

materials. The use of oil-resistant gloves and safety glasses is recommended. Avoid

direct contact with the substance. Store in a cool, well ventilated area. Avoid sources of

ignition, strong oxidising agents and strong acids. Ensure hazardous spillages do not

flow into the ground or drainage system. Ensure potential environmental damage is

controlled safely, according to local laws.

1.5 Purpose

The TW 280HB (Hybrid) is designed to chip solid wood material up to 210 mm (8 inches)

in diameter and is capable of chipping over 7 tonnes of brushwood per hour.

6/72 C190-0500 - Rev 1.0 EN

TW 280HB (Hybrid) 1 Introduction

C190-0500 - Rev 1.0 EN 7/72

2 Product Details

This chapter contains the specifications of the TW 280HB (Hybrid).

It shows the locations of the main components of the chipper, lists all the decals used on

the machine, and describes the purpose of the various guarding assemblies.

2.1 Specification

The specifications of the TW 280HB (Hybrid) are shown in Table 1.

Overall Height 2304 mm

Height with Discharge Tube Removed 1612 mm

Overall Length 3862 mm

Length with Feed Tray Folded 3332 mm

Width 1653 mm

Overall Weight 1270 Kg

Engine Type Kubota 3-cylinder turbo-diesel

Maximum Power 46 kW (62 hp)

Cooling Method Water cooled

Starting Method Electric

Roller feed Twin series hydraulic motors

Maximum Material Diameter 210 mm (8 inches)

Fuel Capacity 36 litres

Hydraulic Oil Capacity 15 litres

Fuel Type Diesel

Table 1 - Specifications

TW 280HB (Hybrid)

2.2 Location of Parts

2.2.1 Parts Locator 1

1 Discharge bucket 12 Light board

2 Roller box guard 13 Reflector (both sides)

3 Lifting eye 14 Control box (both sides)

4 Air intake 15 Feed tray

5 Jockey wheel height adjuster 16 Safety bar

6 Tow head 17 In-feed funnel

7 Engine bay side panels (both sides) 18 Manual canister

8 Rotor housing 19 Protective Devices

9 Reflectors (both sides) 20 Discharge tube clamp

10 Rotor housing blade access hatch 21 Super Capacitors cover

11 Hydraulic motor guard 22 Engine Stop Switch

8/72 C190-0500 - Rev 1.0 EN

TW 280HB (Hybrid) 2 Product Details

Inhaltsverzeichnis

Andere Timberwolf Häcksler Handbücher

Timberwolf

Timberwolf TW150DHB Originalbetriebsanleitung

Timberwolf

Timberwolf PTO/300H Bedienungsanleitung

Timberwolf

Timberwolf PTO/300H Bedienungsanleitung

Timberwolf

Timberwolf TW 13/75G Bedienungsanleitung

Timberwolf

Timberwolf PTO 100G Bedienungsanleitung

Timberwolf

Timberwolf TW 13/75G Bedienungsanleitung

Timberwolf

Timberwolf TW PTO/100G Bedienungsanleitung

Timberwolf

Timberwolf TW 230HB (Diesel) Bedienungsanleitung

Timberwolf

Timberwolf TW 230DHB Bedienungsanleitung

Timberwolf

Timberwolf TW 280TVGTR Bedienungsanleitung

Timberwolf

Timberwolf TW 18/100G Bedienungsanleitung

Timberwolf

Timberwolf TW 18/100G Bedienungsanleitung

Timberwolf

Timberwolf TW 230DHB Bedienungsanleitung

Timberwolf

Timberwolf TW190TDHB Bedienungsanleitung

Timberwolf

Timberwolf TW 13/75G Bedienungsanleitung

Timberwolf

Timberwolf TW 230VTR Bedienungsanleitung

Timberwolf

Timberwolf 125PH Bedienungsanleitung

Timberwolf

Timberwolf TW150DHB Bedienungsanleitung

Timberwolf

Timberwolf TW 150VTR Bedienungsanleitung

Timberwolf

Timberwolf TW 280PHB (Petrol) Bedienungsanleitung

Timberwolf

Timberwolf TW 125PH Bedienungsanleitung

Timberwolf

Timberwolf TW 150DH Bedienungsanleitung

Timberwolf

Timberwolf TW 190TFTR Bedienungsanleitung

Timberwolf

Timberwolf tw pto 150h Bedienungsanleitung

Beliebte Häcksler Handbücher anderer Marken

Craftsman

Craftsman 79964 Bedienungsanleitung

Frontier

Frontier WC1208 Bedienungsanleitung

Viking

Viking GE 150 Bedienungsanleitung

Victory

Victory WC-8H Bedienungsanleitung

GTM Professional

GTM Professional GTS 1300 Bedienungsanleitung

Yardbeast

Yardbeast YB3514 Bedienungsanleitung

Patriot

Patriot Electric Motors Bedienungsanleitung

Echo

Echo CH5540 Bedienungsanleitung

DOSKO

DOSKO 13-21T-13H Bedienungsanleitung

Craftsman

Craftsman 486.24516 Bedienungsanleitung

Garland

Garland 1480 TQG Bedienungsanleitung

Vermeer

Vermeer BC160XL Kurzanleitung

Value Leader

Value Leader z9400 Leitfaden

Salsco

Salsco 600PTO Produkthandbuch

Cub Cadet

Cub Cadet 24A-424M710 Bedienungsanleitung

Champion

Champion 91050 Handbuch

Kellfri

Kellfri 13-WC17H2 Bedienungsanleitung

Salsco

Salsco 813XT Produkthandbuch