Timberwolf Tw pto 150h Bedienungsanleitung

CONTENTS

Section Page No.

INTRODUCTION 1

PURPOSE OF MACHINE 2

MACHINE SPECIFICATIONS 2

PARTS LOCATION DIAGRAMS 3 & 4

SAFE WORKING 5

Operator’s Personal Protective Equipment Required 5

Basic Woodchipping Safety 5

General Safety Matters - Do’s and Don’ts 6

Noise Test 7

OPERATING INSTRUCTIONS 8

Delivery 8

Operator’s Personal Protective Equipment Required 8

Hydraulic Oil Thermometer / Oil Lever Indicator 8

Connecting to Tractor 8

PTO Shaft 8

Moving the Chipper 9

Daily Checks before Starting Tractor 9

Before Using Chipper 9

Manual Controls 10

Auto Controls 10

Emergency Stopping 11

Starting the Chipper 11

Chipping 11

Stopping the Chipper 12

Blockages 12

SERVICE INSTRUCTIONS 13

Service Schedule 14

Safe Lifting of the Chipper 14

Spares 14

Check Hoses 14

Safe Maintenance 15

Copper Ease Safety Information 15

Check Fittings 15

Change Blades 16

PTO Drive Shaft Maintenance 17

Grease the Roller Spline and Bearing 17

Grease the Roller Box Slides 17

Tension Belts 18

Change Hydraulic Oil and Filter 18

WARRANTY STATEMENT 19

EC DECLARATION OF INCORPORATION CERTIFICATE 20

DECALS 21 & 22

ELECTRICAL DETAIL 23

WIRING DIAGRAM 24

HYDRAULIC LAYOUT 25

PARTS LISTS 26 - 36

20th Nov 09

TIMBERWOLF PTO/150H

Thank you for choosing this Timberwolf brushwood chipper. Timberwolf chippers are

designed to give safe and dependable service if operated according to the instructions.

Before using your new chipper, please take time to

read this manual which contains

IMPORTANT HEALTH AND SAFETY INFORMATION

and explains the chipper controls. Failure to do so could result in:

- personal injury

- equipment damage

- damage to property

- a member of the general public becoming injured

This manual covers the operation and maintenance of the Timberwolf PTO/150H. All

information in this manual is based on the latest product information available at the

time.

NOTE: Also supplied with this manual - 1 x Prop shaft instruction sheet.

All the information you need to operate the machine safely and effectively is contained

within pages 3 to 12. Ensure that all operators are adequately trained for operating

this machine, especially with regard to safe working practices.

Timberwolf's policy of constantly improving their products may involve major or minor

changes to the chippers or their accessories. Timberwolf reserves the right to make

changes at any time without notice and without incurring any obligation.

Due to improvements in design and performance during production, there may be

minor discrepancies, in some cases, between the actual chipper and the text in this

manual.

The manual should be considered a permanent part of the

machine and should remain with it if the machine is resold.

CAUTION or WARNING

Be aware of this symbol and where shown,

carefully follow the instructions

This caution symbol indicates important safety messages in this manual. When

you see this symbol, be alert to the possibility of injury to yourself or others, and

carefully read the message that follows.

Always follow safe operating and maintenance practices

INTRODUCTION

TIMBERWOLF PTO/150H

The Timberwolf PTO/150H brushwood chipper is designed to chip solid wood material up to 150 mm

in diameter, depending on tractor horsepower. It is capable of chipping over three tonnes of

brushwood per hour.

1440 mm

DIMENSIONS

2165 mm

2880 mm (1775 mm with feed tray folded)

1110 mm

PURPOSE OF MACHINE

Power source: Tractor PTO Drive

Overall weight: 400kg

Type of feed: Hydraulic

Maximum diameter material: 150 mm (6”)

Material processing capacity: 3 tonnes/hr

Required engine power: 25 - 60hp

PTO speed: 540rpm

TIMBERWOLF PTO/150H SPECIFICATION

PARTS LOCATOR 3

DISCHARGE

BUCKET

DISCHARGE

HANDLE

SAFETY BAR

CONTROL BOX

FEED TRAY

FUNNEL

ROTOR

HOUSING

ROLLER BOX

COVER

DISCHARGE

CLAMPS

POWER CABLE

SOCKET

DISCHARGE

TUBE

OIL TANK

PARTS LOCATOR 4

HYDRAULIC

PUMP

OIL LEVEL GAUGE

TANK TOP FILTER

FAN SECTION

(X2)

ROTOR

ROTOR DRIVE

PULLEY

MACHINE NO. PLATE

NO STRESS SENSOR

DIRECTIONAL

CONTROL

VALVE (DCV)

GEARBOX

PTO

CONNECTION

BREATHER PIPE

SAFE WORKING 5

BASIC WOODCHIPPING SAFETY

The operator should be aware of the following points:

MAINTAIN A SAFETY EXCLUSION ZONE around the chipper of at least 10 metres for the

general public or employees without adequate protection. Use hazard tape to identify this

working area and keep it clear from debris build up. Chips should be ejected away from any

area the general public have access to.

HAZARDOUS MATERIAL - Some species of trees and bushes are poisonous. The chipping

action can produce vapour, spray and dust that can irritate the skin. This may lead to

respiratory problems or even cause serious poisoning. Check the material to be chipped before

you start. Avoid confined spaces and use a facemask if necessary.

BE AWARE when the chipper is processing material that is an awkward shape. The material

can move from side to side in the funnel with great force. If the material extends beyond the

funnel, the brash may push you to one side causing danger. Badly twisted brash should be

trimmed before being chipped to avoid thrashing in the feed funnel.

BE AWARE that the chipper can eject chips out of the feed funnel with considerable force.

Always wear full head and face protection.

ALWAYS work on the side of the machine furthest from any local danger, e.g. not road side.

WARNING

The chipper will feed material through on its own. To do this, it relies

on sharp blades on both on the infeed rollers and on the chipper rotor.

To keep the blades sharp, only feed the machine with clean brushwood.

DO NOT put muddy/dirty wood, roots, potted plants, bricks, stones or

metal into the chipper.

OPERATOR'S PERSONAL PROTECTIVE EQUIPMENT REQUIRED

Chainsaw safety helmet

fitted with mesh visor and

recommended ear defenders

to the appropriate

specifications.

Work gloves with

elasticated wrist.

Close fitting heavy-duty

non-snag clothing.

Face mask if

appropriate.

DO NOT

wear rings, bracelets,

watches, jewellery or any

other items that could be

caught in the material and

draw you into the chipper.

Steel toe cap safety boots.

SAFE WORKING 6

GENERAL SAFETY MATTERS

DO NOT use chipper unless available light is

sufficient to see clearly.

DO NOT attempt to engage PTO without the

feed funnel, belt guard, guards and discharge unit

securely in place.

DO NOT operate the chipper unless properly

guarded.

DO NOT stand directly in front of the feed funnel

when using the chipper. Stand to one side.

DO NOT allow -

DO NOT smoke when

refuelling.

DO NOT let anyone who has not received

instruction operate the machine.

DO NOT climb on the machine at any time.

DO NOT handle material that is partially engaged

in the machine.

DO NOT touch any exposed wiring while

machine is running.

DO NOT use the chipper inside buildings.

- to enter the machine, as damage is likely.

ALWAYS stop the tractor engine and disconnect

the PTO shaft before making any adjustments,

refuelling or cleaning.

ALWAYS check machine has stopped rotating

and remove tractor ignition key before

maintenance of any kind, or whenever the

machine is to be left unattended.

ALWAYS check machine is well supported and

cannot move.

ALWAYS run tractor engine at required speed to

acheive correct PTO speed.

ALWAYS check (visually) for fluid leaks.

ALWAYS take regular breaks. Wearing personal

protective equipment for long periods can be

tiring and hot.

ALWAYS keep hands, feet and clothing out of

feed opening, discharge and moving parts.

ALWAYS use the next piece of material or a push

stick to push in short pieces. Under no

circumstances should you reach into the funnel.

ALWAYS keep the operating area clear of people,

animals and children.

ALWAYS keep the operating area clear from

debris build up.

ALWAYS keep clear of the chip discharge tube.

Foreign objects may be ejected with great force.

ALWAYS ensure protective guarding is in place

before commencing work. Failure to do so may

result in personal injury or loss of life.

ALWAYS use chipper in a well ventilated area -

exhaust fumes are dangerous.

BRICKS STRING CLOTH PLASTIC STONES

METAL GLASS RUBBER ROOTS BEDDING

PLANTS

DO’S AND DON’TS



SAFE WORKING 7

113.3 dB

105.8 dB

1 METRE

101.8 dB 98.2 dB

90.4 dB

R= 4 metres

Noise levels between 80 and 114dBA will be experienced at the working position. Wear ear

defenders at all times to prevent possible damage to hearing. All persons within a 4 metre

radius must also wear ear defenders.

NOISE TEST

MACHINE:

NOTES:

TIMBERWOLF PTO/150H ATTACHED TO A 40HP

TRACTOR

TESTED CHIPPING 4 INCH ROUND POLES

ALL READINGS REPRESENT TRACTOR WITH

CHIPPER CHIPPING

OPERATING INSTRUCTIONS

DELIVERY

All Timberwolf PTO/150H machines have a full pre delivery inspection before leaving the factory and

are ready to use. Read and understand this instruction manual before attempting to operate the

chipper. In particular, read pages 5-8 which contains important health and safety information and

advice.

OPERATOR’S PERSONAL PROTECTIVE EQUIPMENT REQUIRED

CHAINSAW safety helmet fitted with visor and recommended ear defenders to an

appropriate specification

HEAVY-DUTY gloves with elasticated wrist area.

CLOSE - FITTING heavy-duty non-snag clothing.

SAFETY footwear.

FACE MASK (if appropriate).

See page 5 for more detailed information.

CHECK the angle of the prop shaft when connected to the tractor, which should not exceed 16o.

CHECK that when the machine is lifted for transport the prop shaft does not reach an angle that

causes damage.

IF the prop shaft is supplied with a torque limiter or clutch, this must be fitted to the chipper end of

the drive shaft.

PTO SHAFT

This is situated on the side of the hydraulic oil tank. When the chipper is

running the oil temperature should not exceed 65oC. If it does, stop the

machine immediately. Failure to do so may result in damage. Overheating

can result from the chipper being worked extremely hard in hot conditions, as

the oil is not getting a chance to cool down. Stop the chipper and allow oil to

cool before continuing. If the temperature goes above 65oC and the machine

is not being worked hard or the air temperature is not particularly high this

indicates low oil, a jammed hydraulic motor or valve. Stop immediately and investigate.

When the chipper is on level ground the oil level should sit between the red

line at the bottom of the gauge and the blue line at the top. If this level drops

significantly it indicates an oil leak. Stop immediately and investigate.

HYDRAULIC OIL THERMOMETER / OIL LEVEL INDICATOR

CONNECTING TO TRACTOR

Ensure the tractor is turned off and the ignition key removed before connecting the PTO. Rotating

machinery can be very dangerous!

OPERATING INSTRUCTIONS 9

DAILY CHECKS BEFORE STARTING TRACTOR

ENSURE drive shaft ends are securely fitted to PTO shaft and chipper input shaft.

CHECK for properly guarded PTO shaft, chipper input shaft and drive shaft.

CHECK that guard chains are securely attached to stationary frame to prevent rotation of guard.

CONNECT power cable from tractor to chipper.

LOCATE the machine on firm level ground.

CHECK the discharge unit is in place and tightened securely.

CHECK discharge tube is pointing in a safe direction.

CHECK the feed funnel to ensure no objects are inside.

CHECK feed tray is in up position to prevent people reaching rollers.

CHECK controls as described below.

For parts location see diagrams on pages 3 & 4

IT IS ESSENTIAL TO CARRY OUT THE FOLLOWING TESTS to check safety equipment - this

sequence of tests will only take a few seconds to carry out. We recommend that these tests are

carried out daily. Observing the function as described will confirm that the safety circuits are working

correctly. This is also a good opportunity to remind all operators of the control and emergency stop

systems.

BEFORE USING THE CHIPPER

679

PRESS THE

GREEN BUTTON

THE ROLLERS

SHOULD TURN

FORWARDS

PRESS THE RED

SAFETY BAR

THE ROLLERS

SHOULD STOP

PRESS THE BLUE BUTTON

THE ROLLERS SHOULD TURN

BACKWARDS ONLY WHILE

THE BUTTON IS PRESSED

PRESS THE EMERGENCY

RED BUTTON

THE ROLLERS

SHOULD STOP

PRESS THE BLUE

BUTTON

THE ROLLERS

SHOULD NOT TURN

WITH THE ROTOR RUNNING AT 540 RPM

PRESS THE GREEN

BUTTON

THE ROLLERS SHOULD

TURN FORWARDS

PULL THE RED

SAFETY BAR

THE ROLLERS

SHOULD STOP

PULL TO RESET THE RED BUTTON

WHILE PUSHING THE SAFETY BAR,

PRESS THE BLUE BUTTON.

ROLLERS SHOULD TURN BACKWARDS

ONLY WHILE BLUE BUTTON IS PRESSED

PRESS THE GREEN

BUTTON AGAIN

THE ROLLERS SHOULD

TURN FORWARDS

DO NOT move the chipper with the rotor running.

ALWAYS ensure the retaining nuts and clamp are tight when transporting with a discharge tube in place.

NEVER pull the machine by the red safety bar as linkages will be damaged.

MOVING THE CHIPPER

Andere Handbücher für tw pto 150h

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Timberwolf Häcksler Handbücher

Timberwolf

Timberwolf TW150FTR Bedienungsanleitung

Timberwolf

Timberwolf TW 160PH Bedienungsanleitung

Timberwolf

Timberwolf TW 280FTR (Petrol) Bedienungsanleitung

Timberwolf

Timberwolf TW 230VTR Bedienungsanleitung

Timberwolf

Timberwolf TW 13/75G Bedienungsanleitung

Timberwolf

Timberwolf PTO/300H Bedienungsanleitung

Timberwolf

Timberwolf TW 18/100G Bedienungsanleitung

Timberwolf

Timberwolf TW 230DHB Bedienungsanleitung

Timberwolf

Timberwolf TW190TR Bedienungsanleitung

Timberwolf

Timberwolf TW150DHB Originalbetriebsanleitung

Timberwolf

Timberwolf TW 230HB (Diesel) Bedienungsanleitung

Timberwolf

Timberwolf TW 18/100G Bedienungsanleitung

Timberwolf

Timberwolf Entec 230DH Bedienungsanleitung

Timberwolf

Timberwolf TW150DHB Bedienungsanleitung

Timberwolf

Timberwolf TW PTO/100G Bedienungsanleitung

Timberwolf

Timberwolf TW 230DHB Bedienungsanleitung

Timberwolf

Timberwolf TW 125PH Bedienungsanleitung

Timberwolf

Timberwolf TW 280TFTR Bedienungsanleitung

Timberwolf

Timberwolf TW 280HB Bedienungsanleitung

Timberwolf

Timberwolf PTO 100G Bedienungsanleitung

Timberwolf

Timberwolf PTO/300H Bedienungsanleitung

Timberwolf

Timberwolf TW190TDHB Bedienungsanleitung

Timberwolf

Timberwolf TW 190TFTR Bedienungsanleitung

Timberwolf

Timberwolf TW 280TVGTR Bedienungsanleitung

Beliebte Häcksler Handbücher anderer Marken

Craftsman

Craftsman 79964 Bedienungsanleitung

Frontier

Frontier WC1208 Bedienungsanleitung

Viking

Viking GE 150 Bedienungsanleitung

Victory

Victory WC-8H Bedienungsanleitung

GTM Professional

GTM Professional GTS 1300 Bedienungsanleitung

Yardbeast

Yardbeast YB3514 Bedienungsanleitung

Patriot

Patriot Electric Motors Bedienungsanleitung

Echo

Echo CH5540 Bedienungsanleitung

DOSKO

DOSKO 13-21T-13H Bedienungsanleitung

Craftsman

Craftsman 486.24516 Bedienungsanleitung

Garland

Garland 1480 TQG Bedienungsanleitung

Vermeer

Vermeer BC160XL Kurzanleitung

Value Leader

Value Leader z9400 Leitfaden

Salsco

Salsco 600PTO Produkthandbuch

Cub Cadet

Cub Cadet 24A-424M710 Bedienungsanleitung

Champion

Champion 91050 Handbuch

Kellfri

Kellfri 13-WC17H2 Bedienungsanleitung

Salsco

Salsco 813XT Produkthandbuch

Timberwolf tw pto 150h Bedienungsanleitung

Beliebte Häcksler Handbücher anderer Marken