Weslo Cadence Cr12 Treadmill Bedienungsanleitung

Model No. WLTL21130

Serial No.

Write the serial number in the

space above for future reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S

MANUAL

Serial Number

Decal

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

QUESTIONS?

If you have questions, or if there

are missing parts, we will guar-

antee complete satisfaction

through direct assistance from

our factory.

TO AVOID DELAYS, PLEASE

CALL DIRECT TO OUR TOLL-

FREE CUSTOMER HOT LINE.

The trained technicians on our

Customer Hot Line will provide

immediate assistance, free of

charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the

center of this manual.

WESLO is a registered trademark of ICON Health & Fitness, Inc.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at

least eight feet of clearance behind it and two

feet on each side. Do not place the treadmill

on any surface that blocks air openings. To

protect the floor or carpet from damage,

place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should not be used by persons

weighing more than 250 pounds.

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothing when

using the treadmill. Do not wear loose cloth-

ing that could become caught in the treadmill.

Athletic support clothes are recommended

for both men and women. Always wear athlet-

ic shoes. Never use the treadmill with bare

feet, wearing only stockings, or in sandals.

10. When connecting the power cord (see page

10), plug the power cord into a surge sup-

pressor (not included) and plug the surge

suppressor into a grounded circuit capable of

carrying 15 or more amps. No other appli-

ance should be on the same circuit. Do not

use an extension cord.

11. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 10. To purchase a surge suppressor, see

your local WESLO dealer or call 1-800-806-

3651 and order part number 146148.

12. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed or stop unexpectedly, which may result

in a fall and serious injury.

13. Keep the power cord and the surge suppres-

sor away from heated surfaces.

14. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See page 5

if the treadmill is not working properly.)

15. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

16. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

17. Never leave the treadmill unattended while it is

running. Always remove the key and unplug

the power cord when the treadmill is not in

use.

18. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO MOVE

THE TREADMILL on page 13.) You must be

able to safely lift 45 pounds (20 kg) in order

to raise, lower, or move the treadmill.

19. Do not change the incline of the treadmill by

placing objects under the treadmill.

20. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

21. Inspect and properly tighten all parts of the

treadmill regularly.

WARNING:To reduce the risk of burns, fire, electric shock, or injury to persons, read

the following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

22. Never drop or insert any object into any

opening.

23. DANGER:Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the

maintenance and adjustment procedures

described in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

24. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-

mercial, rental, or institutional setting.

WARNING:Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob-

lems. Read all instructions before using. ICON assumes no responsibility for personal injury or prop-

erty damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown have been placed on your treadmill. If a decal is missing, or if it

is not legible, please call our Customer Service Department, toll-free, to order a

free replacement decal (see ORDERING REPLACEMENT PARTS on the back cover

of this manual). Apply the decal in the location shown. Note: The decals are not

shown at actual size.

¥Hazardous Voltage

¥Risk of Electric Shock

¥Unplug Treadmill before Assemb

/Disassembly.

BEFORE YOU BEGIN

Handrails

Console

Latch Knob

Key/Clip

Circuit Breaker

Walking Belt

Foot Rails

Incline Leg

Incline Pin

Power Cord

FRONT

RIGHT SIDE

BACK

Rear Roller

Adjustment Bolts

Water Bottle Holder

(No bottle is included)

Upright

Thank you for selecting the WESLO CADENCE®

CR12 treadmill. The CADENCE CR12 treadmill com-

bines advanced technology with innovative design to

let you enjoy an excellent form of cardiovascular exer-

cise in the convenience and privacy of your home. And

when you’re not exercising, the unique CADENCE

CR12 treadmill can be folded up, requiring less than

half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please call our Customer Service

Department toll-free at 1-800-999-3756, Monday

through Friday, 6 a.m. until 6 p.m. Mountain Time

(excluding holidays). To help us assist you, please note

the product model number and serial number before

calling. The model number of the treadmill is

WLTL21130. The serial number can be found on a

decal attached to the treadmill (see the front cover of

this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is

coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the

top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-

mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,

non-abrasive cleaner.

Assembly requires the included allen wrenches and your own phillips screwdriver ,

wire cutters , adjustable wrench , and needlenose pliers .

For help identifying the assembly hardware, refer to the PART IDENTIFICATION CHART below. Note: The

assembly hardware and other small parts are packaged in separate part bags. Do not open the part bags

until instructed to do so.

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the tread-

mill onto its left side as shown. Partially fold the Frame

(84) so the treadmill is more stable. Do not fully fold

the treadmill until it is completely assembled.

Open part bag A. Attach four Base Pads (33) to the

Base (38) with two 1 1/4” Tek Screws (9) and two 3/4”

Tek Screws (28). Attach a Wheel (42) to the right side of

the Base with a Wheel Bolt (41) and a Wheel Nut (22).

84 42 41

38 28

U-Nut (10)–4

Wheel Nut (22)–2

3/4” Tek Screw (28)–2 3/4” Screw (5)–10

Wheel Bolt (41)–2

3” Bolt (1)–8

5/16” Star Washer

(61)–8

1 1/4” Tek Screw (9)–2

3. With the help of a second person, tip the treadmill so the

Base Pads (33) (see drawing 1) are lying flat on the floor.

Raise the Uprights (14, 15) to the vertical position.

Hold a Handrail Spacer (3) so the arrow between the two

large holes is pointing upward. Thread the Wire Harness

(53) through the upper large hole in the Handrail Spacer.

Next, insert the Wire Harness into a Handrail (4) and out of

the indicated hole in the side of the Handrail. If necessary,

use needlenose pliers to pull the Wire Harness out of the

hole.

Hold the Handrail Spacer (3) and the Handrail (4)

against the right Upright (15). Attach the Handrail and

the Handrail Spacer with two 3” Bolts (1) and two 5/16”

Star Washers (61) as shown. Make sure that the Wire

Harness (53) is not in the way of the Handrail Bolts.

Do not tighten the Handrail Bolts yet.

Attach the other Handrail (not shown) to the Left Upright

(14) as described above. Note: There is not a Wire

Harness in the Left Upright.

315

2. Open part bag B. See drawing 2a. Make sure that

there are U-nuts (10) in the bottom of each Upright

(14, 15). Clip two U-nuts (10) over the two round holes

in the top of each Upright (14, 15) as shown.

Identify the Right Upright (15), which has a large round

hole and a slot near the lower end. While a second per-

son holds the Right Upright near the Wire Harness (53),

insert the end of the Wire Harness into the round hole

and out of the upper end of the Right Upright.

Slide the slot in the Right Upright (15) onto the Upright

Lock Bracket (2) (see drawing 2b). Slide the Right Upright

down until it reaches the Base (38). Make sure that the

Wire Harness (53) is not pinched. Attach the Right

Upright to the Base with two 3” Bolts (1) and two 5/16”

Star Washers (61).

With the help of a second person, tip the treadmill onto

its other side. Attach the Left Upright (14) as described

above. (Note: There is not a wire harness on the left

side.) Attach the other Wheel (not shown) to the Base

(38) as described in step 1.

38 1

Round Hole

Slot

Side View

14, 15

2a 2b

6. Hold the Console (11) near the Console Base (87).

Touch the right Handrail (4) to discharge any static.

Locate the two wires in the Wire Harness (53) that have

L-shaped connectors on the ends. Press the connectors

onto the two tabs on the switch shown in inset drawing 6a.

Connect the other two wires in the Wire Harness (53) to

the back of the Console (87) in the locations shown by

the arrows in drawing 6. The connectors should slide

easily into the sockets and snap into place (see

drawings 6b and 6c). If the connectors do not slide easi-

ly and snap into place, turn the connectors and then

insert them. IF THE CONNECTORS ARE NOT INSERT-

ED PROPERLY, THE CONSOLE MAY BE DAMAGED

WHEN THE POWER IS TURNED ON.

Ties

6a Tabs

Connectors

Hinges

5. Insert the Battery Cover (12) up through the bottom of

the Console Base (87), with the hinges in the position

shown. The Battery Cover should pivot down, away from

the Console Base.

Remove the tape from the connectors.

Ties 5

4. Open part bag C. Set the Console Base (87) on the

Handrails (4). Thread four 3/4” Screws (5) into the

Handrails and the Console Base. After you have started

all four Screws, tighten the Screws until they are

snug; do not overtighten the Screws.

Insert the Wire Harness (53) through the two indicated

plastic ties on the Console Base (87) and then through

the hole in the bottom of the Console Base.

9. Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep

the included allen wrenches in a secure place for adjustment purposes (see page 16). To protect the floor or

carpet, place a mat under the treadmill.

8. Press the Latch Knob Sleeve (73) into the Left Upright

(14). Remove the Latch Knob (54) from the Latch Pin

(66). Make sure that the Latch Pin Collar (56) and the

Spring (55) are on the Latch Pin, and insert the Latch

Pin into the Latch Knob Sleeve from the side shown.

Tighten the Latch Knob back onto the Latch Pin.

Lift the treadmill frame (see HOW TO FOLD THE

TREADMILL FOR STORAGE on page 13). Make sure

that the frame is centered between the two Handrails

(4). Firmly tighten all of the bolts and screws used in

steps 2, 3, and 4. Then, lower the frame to the floor.

53 12

7. Set the Console (11) in the Console Base (87). Make

sure that no wires are pinched or obstructing the

area under the Battery Cover (12). Insert as much of

the Wire Harness (53) as possible down into the hole in

the right Handrail (4). Securely tighten the plastic tie

nearest to the right Handrail. Pull any excess Wire

Harness from between the plastic ties, and then tighten

the second plastic tie. Cut off the ends of both plastic

ties. Cover the Wire Harness with the Wire Cover (31),

and route the Wire Harness out of the hole in the side of

the Wire Cover. Attach the Wire Cover to the back of the

Console Base with two 3/4” Screws (5). Do not over-

tighten the Screws.

Make sure that no wires are pinched. Attach the

Console (11) to the Console Base (87) with the four

remaining 3/4” Screws (5). Do not overtighten the

Screws.

Ties

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other

substances to the walking belt or the walking plat-

form. Such substances will deteriorate the walking

belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated

electronic equipment, can be seriously damaged by

sudden voltage changes in your home’s power.

Voltage surges, spikes, and noise interference can

result from weather conditions or from other appli-

ances being turned on or off. To decrease the pos-

sibility of your treadmill being damaged, always

use a surge suppressor with your treadmill (see

drawing 1 at the right). To purchase a surge sup-

pressor, see your local WESLO dealer or call

1-800-806-3651 and order part number 146148.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have

a UL suppressed voltage rating of 400 volts or

less and a minimum surge dissipation of 450

joules. The surge suppressor must be electrically

rated for 120 volts AC and 15 amps. There must be

a monitoring light on the surge suppressor to indi-

cate whether it is functioning properly. Failure to

use a properly functioning surge suppressor

could result in damage to the control system of

the treadmill. If the control system is damaged, the

walking belt may change speed or stop unexpect-

edly, which may result in a fall and serious injury.

This product must be grounded. If it should mal-

function or break down, grounding provides a path of

least resistance for electric current to reduce the risk

of electric shock. This product is equipped with a cord

having an equipment-grounding conductor and a

grounding plug. Plug the power cord into a surge

suppressor, and plug the surge suppressor into an

appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances. Important: The treadmill is not com-

patible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus-

trated in drawing 1 below. A temporary adapter that

looks like the adapter illustrated in drawing 2 may be

used to connect the surge suppressor to a 2-pole

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed

by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet

box covers are not grounded. Contact a qualified

electrician to determine if the outlet box cover is

grounded before using an adapter.

DANGER:Improper connection

of the equipment-grounding conductor can

result in an increased risk of electric shock.

Check with a qualified electrician or service-

man if you are in doubt as to whether the

product is properly grounded. Do not modify

the plug provided with the product—if it will

not fit the outlet, have a proper outlet

installed by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weslo Tretmühle Handbücher

Weslo

Weslo 831.293020 Bedienungsanleitung

Weslo

Weslo Cadence C32 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 21.5 Treadmill Einrichtungshandbuch

Weslo

Weslo Magnetic Jog WITL11013.0 Bedienungsanleitung

Weslo

Weslo Cadence 920 Bedienungsanleitung

Weslo

Weslo Cadence 70 Treadmill Systemhandbuch

Weslo

Weslo Cadence 840 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 1000 Fm Systemhandbuch

Weslo

Weslo Cadence 830 Bedienungsanleitung

Weslo

Weslo Cadence S 8 Benutzerhandbuch

Weslo

Weslo Cadence S 8 Bedienungs- und Wartungshandbuch

Weslo

Weslo WLTL19011 Bedienungsanleitung

Weslo

Weslo Cadence 55 Bedienungsanleitung

Weslo

Weslo Cadence 150 Treadmill Bedienungsanleitung

Weslo

Weslo CADENCE DL3 Bedienungsanleitung

Weslo

Weslo Cadence 700 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 4450 Bedienungsanleitung

Weslo

Weslo Cadence C62 Bedienungsanleitung

Weslo

Weslo Cadence 16.0 Cwl Treadmill Kurzanleitung

Weslo

Weslo Cadence 45 Treadmill Bedienungsanleitung

Weslo

Weslo Lyne 3500 Treadmill Bedienungs- und Wartungshandbuch

Weslo

Weslo WCTL84090 Bedienungsanleitung

Weslo

Weslo Cadence 21.5 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 500 Treadmill Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung