ACME ENERGY HYBRID X-400 BSW Bedienungsanleitung

User Manual

Please read the instruc on carefully before use

XA-400 BSW

CONTENTS

1. Safety Instructions..........................................................................................2

2. Technical Specifications..................................................................................4

3. Description.....................................................................................................5

3.1 Control Panel ..........................................................................................5

4. Gobo and Lamp..............................................................................................6

4.1 Gobos .....................................................................................................6

5. How To Set The Unit.......................................................................................6

5.1 Main Function.........................................................................................6

5.2 Home Position Adjustment ...................................................................13

5.3 Error Information..................................................................................15

6. Control By Universal DMX Controller ...........................................................16

6.1 Connection ...........................................................................................16

6.2 Address Setting.....................................................................................17

6.3 DMX 512 Configuration ........................................................................17

7. Troubleshooting ...........................................................................................23

8. Cleaning .......................................................................................................24

1. Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer

will not accept liability for any resulting defects or problems.

Unpack and check carefully that there is no transportation damage before using the unit.

The unit is for indoor use only. Use only in a dry location.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.

Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Maximum ambient temperature TA: 40℃. DO NOT operate it when the temperature is higher.

DO NOT connect the device to any dimmer pack.

During initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective, and it will decrease gradually within 15 minutes.

Make sure there are no flammable materials close to the unit while operating to avoid fire hazard.

Examine the power wires carefully; replace them immediately if there is any damage.

Unit’s surface temperature may reach up to 85℃. DO NOT touch the housing bare-handed during

its operation, and allow about 15 minutes for cooling the unit down before replacing bulb or

maintenance as it could be very hot.

Avoid any inflammable liquids, water or metal objects entering the unit. Once it happens, cut off

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

the mains power immediately.

DO NOT operate in dirty or dusty environment, do clean fixtures regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires together twist other cables.

The minimum distance between light output and the illuminated surface must be more than 12

meters.

Disconnect mains power before fuse/lamp replacement or servicing.

Replace fuse/lamp only with the same type.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage

or malfunction. Please contact the nearest authorized technical assistance center if needed.

Disconnect the mains power if the fixture is has not been used for a long time.

DO use the original packing materials before transporting it again.

Cautions:

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

Hot lamp explosion hazard. DO NOT open the unit within 15 minutes after switching off.

DO replace the bulb once it is damaged, deformed or life-expired.

DO NOT look directly at the light while the bulb is on.

Never touch bulb with bare fingers, as it is very hot after using.

DO NOT start on the unit without bulb enclosure or when housing is damaged.

Installation:

The unit is fully operational in three different mounting positions, hanging upside-down from a ceiling

or set on a flat level surface. To avoid internal damage to the unit, never mount the unit on its side as

illustrated above. Be sure this fixture is kept at least 0.5m away from any flammable materials

(decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent

accidental damage and/or injury in the event the clamp fails.

2. Technical Specifications

Power supply

AC 100~240V 50/60Hz

Power Consumption

305W

Light Source

1 X 300W LED

Movement

Pan: 540°

Tilt: 270°

Pan/Tilt moving speed adjustable.

Automatic Pan/Tilt correction.

Easy calibration and maintenance by magnetic home positioning.

Dimmer/Shutter

Blackout, 0~100% smooth dimming, independent shutter and various strobe effect.

Integrated three features: beam, spot and wash

Color wheel

7 fixed colors plus white

Rainbow effect in both directions.

Gobo wheel

1 Static gobo wheel with 6 gobos plus four open

1 Rotating gobo wheel with 7 gobos plus open

Prism

Prism : 6 facet prism rotating in both directions

Frost

Independent frost effect

Focus

Motorized focus

Zoom

Motorized linear zoom system

Protocols

DMX 512

Date input/output: 3/5 Pin XLR socket

Dimension/Weight:

435x344x560mm, 21 Kgs

17.1"x13.5"x22.0"in, 46.2lbs

3. Description

3.1 Control Panel

Front view Rear view

1234567

1.LED:

MASTER On Master mode

SLAVE On Slave mode

SOUND On Sound activation

DMX On DMX input present

2.Display: To show the various menus and the selected function.

3.Button:

MENU To enter into move backward or leave the menu

UP To go backward to move up in the menu

DOWN To go to move down in the menu

ENTER To perform the desired functions

4.DMX input/output: For DMX 512 operation, use 3/5-pin XLR plug cable to link the units together

5.Fuse (T 10A): Protect the unit from damage of over current.

6.Power Cable: To connect to the mains supply

7.Power Switch: Turns On/Off the power.

393

560

435 344

4. Gobo and Lamp

4.1 Gobos

CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be

opened!

5. How To Set The Unit

5.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until the

required function is shown on the monitor. Select the function by the ENTER button. Use the

UP/DOWN button to choose the submenu, press the ENTER button to store and automatically return

to the last menu. Press the MENU button or let the unit idle one minute to exit menu mode.

In the event of disconnecting with mains power, press the UP button for one minute to enter into

menu mode. Press MENU button or let the unit idle one minute to exit.

The main functions are shown below（the grayed boxes are preset settings）:

DANGER!

Install the gobos with the device switched off only.

Unplug from mains before changing gobos!

Yes

Fixture Information

Fixture Test

Reset Functions

Yes

Special Functions

DMX Settings

To select DMX Settings press the ENTER button to confirm, use the UP/DOWN button to select DMX

Address, DMX Channel Mode or DMX State.

DMX Address —DMX512 address setting

To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust

the address from 001 to 512, press the ENTER button to store. Press the MENU button back to the

last menu or let the unit idle one minute to exit menu mode.

DMX Channel Mode — channel mode

To select DMX Channel Mode, press the ENTER button to confirm. Use the UP/DOWN button to

select Mode1 (16) or Mode2 (19) channels mode, press the ENTER button to store. Press the

MENU button back to the last menu or let the unit idle one minute to exit menu mode.

DMX State —fixture state while DMX single stops

To select DMX State, press the ENTER button to confirm. Use the UP/DOWN button to select

Master Slave(fixture enters to master slave mode),Blackout (fixture blacks out if DMX signal stops)

or Hold (fixture continues to obey the last command it received Via DMX if DMX signal stops),

press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle

one minute to exit menu mode.

Fixture Settings

To select Fixture Settings, press the ENTER button to confirm, use the UP/DOWN button to select Pan

Inverse, Tile Inverse, P/T Feedback, Dimmer Speed, Dimmer Curve or Auto Focus.

Pan Inverse

To select Pan Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select No

(normal) or Yes (pan inverse), press the ENTER button to store. Press the MENU button back to

the last menu or let the unit idle one minute to exit menu mode.

Tilt Inverse

To select Tilt Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select No

(normal) or Yes (tilt inverse), press the ENTER button to store. Press the MENU button back to the

last menu or let the unit idle one minute to exit menu mode.

P/T Feedback

To select P/T Feedback, press the ENTER button to confirm. Use the UP/DOWN button to select

No (Pan or tilt’s position will not feedback while out of step) or Yes (Feedback while pan/tilt out of

step), press the ENTER button to store. Press the MENU button back to the last menu or let the

unit idle one minute to exit menu mode.

Dimmer Speed

To select Dimmer Speed, press the ENTER button to confirm. Use the UP/DOWN button to select

fast or smooth, press the ENTER button to store. Press the MENU button back to the last menu or

let the unit idle one minute to exit menu mode.

Dimmer Curve

To select Dimmer Curve, press the ENTER button to show the DIMMER CURVE on the display. Use

the DOWN/UP button to select the Mode1 or Mode 2 or Mode 3 or Mode 4. Once the mode has

been selected, press the ENTER button to setup, to go back to the functions without any change

press the MENU button again. Press and hold the MENU button about one second or wait for one

minute to exit the menu mode.

Mode 1(Optically Linear):

The increase in light intensity appears to be linear as DMX value is increased.

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME FLANDINA 22 IP Bedienungsanleitung

ACME

ACME LED-275 D Bedienungsanleitung

ACME

ACME Inferno Bedienungsanleitung

ACME

ACME DAZZLED COLORLED-430 Bedienungsanleitung

ACME

ACME Thunderroar Bedienungsanleitung

ACME

ACME STAGE PAR 100 COLOUR IP Bedienungsanleitung

ACME

ACME TV LIGHT PANEL 2000 Bedienungsanleitung

ACME

ACME Uploader II Bedienungsanleitung

ACME

ACME Dynamic 25 Roller LED-SC25B Bedienungsanleitung

ACME

ACME STAGE PAR 400 ZOOM IP Bedienungsanleitung

ACME

ACME Solaris Bedienungsanleitung

ACME

ACME Splendor 220 II Bedienungsanleitung

ACME

ACME TV LIGHT PANEL 2000 Bedienungsanleitung

ACME

ACME Xperior 700SZ Spot Bedienungsanleitung

ACME

ACME LS-1005 Bedienungsanleitung

ACME

ACME IL-2420 II Bedienungsanleitung

ACME

ACME Diabolo Bedienungsanleitung

ACME

ACME FESTIVAL Bedienungsanleitung

ACME

ACME Stage Par 220MP-220 Bedienungsanleitung

ACME

ACME LED-3082 RGB Bedienungsanleitung

ACME

ACME Glamour 350Z Bedienungsanleitung

ACME

ACME IP Cabin AR-01 Bedienungsanleitung

ACME

ACME ENERGY SPOT XA-400 SPOT Bedienungsanleitung

ACME

ACME PIXEL LINE IP Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung