Endress+Hauser Liquistation CSF48 Bedienungsanleitung

Products Solutions Services

Brief Operating Instructions

Liquistation CSF48

Automatic sampler for liquid media

These Instructions are Brief Operating Instructions; they are

not a substitute for the Operating Instructions pertaining to

the device.

Detailed information on the device can be found in the

Operating Instructions and in the other documentation

available at:

• www.endress.com/device-viewer

• Smart phone/tablet: Endress+Hauser Operations App

KA01165C/07/EN/03.16

71314894

Valid as of version

01.06.00

Liquistation CSF48

2 Endress+Hauser

TAG No.: XXX000

Ser. No.: X000X000000

Order code 00X00-XXXX0XX0XXX

www.endress.com/deviceviewer Endress+Hauser Operations App

Serial number

A0023555

Liquistation CSF48 Table of contents

Endress+Hauser 3

Table of contents

1 Document information ........................................................... 4

1.1 Warnings ........................................................................... 4

1.2 Symbols ............................................................................ 4

1.3 Symbols at the device ................................................................... 4

1.4 Documentation ....................................................................... 5

2 Basic safety instructions ......................................................... 6

2.1 Requirements for the personnel ........................................................... 6

2.2 Designated use ....................................................................... 6

2.3 Occupational safety .................................................................... 6

2.4 Operational safety ..................................................................... 7

2.5 Product safety ........................................................................ 7

3 Incoming acceptance and product identification .................................. 8

3.1 Incoming acceptance ................................................................... 8

3.2 Product identification .................................................................. 8

3.3 Scope of delivery ...................................................................... 9

3.4 Certificates and approvals ............................................................... 9

4 Installation ..................................................................... 10

4.1 Installation conditions ................................................................. 10

4.2 Installation ......................................................................... 17

4.3 Sampling with a flow assembly .......................................................... 21

4.4 Post-installation check ................................................................. 22

5 Electrical connection ............................................................ 23

5.1 Connecting the sampler ................................................................ 23

5.2 Connecting modules and sensors ......................................................... 30

5.3 Terminal assignment for input/output signals ............................................... 41

5.4 Connecting additional inputs, outputs or relays ............................................... 42

5.5 Connecting digital communication ........................................................ 45

5.6 Hardware settings .................................................................... 48

5.7 Ensuring the degree of protection ........................................................ 49

5.8 Post-connection check ................................................................. 50

6 Operation options .............................................................. 51

6.1 Overview ........................................................................... 51

6.2 Access to the operating menu via the local display ............................................ 52

6.3 Configuration options ................................................................. 53

7 Commissioning ................................................................. 57

7.1 Function check ...................................................................... 57

7.2 Switching on ........................................................................ 57

7.3 Basic setup ......................................................................... 58

7.4 Sampling programs ................................................................... 59

Document information Liquistation CSF48

4 Endress+Hauser

1 Document information

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

Consequences of non-compliance (if

applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

1.3 Symbols at the device

Symbol Meaning

Reference to device documentation

Liquistation CSF48 Document information

Endress+Hauser 5

1.4 Documentation

The following manuals which are available on the product pages on the internet complement

these Operating Instructions:

• Operating Instructions for Liquistation CSF48, BA00443C

– Device description

– Commissioning

– Operation

– Software description (excluding sensor menus; these are described in a separate manual -

see below)

– Device-specific diagnostics and troubleshooting

– Maintenance

– Repair and spare parts

– Accessories

– Technical data

• Operating Instructions for Memosens, BA01245C

– Software description for Memosens inputs

– Calibration of Memosens sensors

– Sensor-specific diagnostics and troubleshooting

• Operating Instructions for HART communication, BA00486C

– Onsite settings and installation instructions for HART

– Description of HART driver

• Guidelines for communication via fieldbus and web server

– HART, SD01187C

– PROFIBUS, SD01188C

– Modbus, SD01189C

– Web server, SD01190C

– Web server (optional), SD01190C

– EtherNet/IP, SD01293C

• Special Documentation: Sampler application manual SD01068C

• Documentation on other devices in the Liquiline platform:

– Liquiline CM44xR (DIN rail device)

– Liquiline System CA80 (analyzer)

– Liquiline System CAT8x0 (sample preparation)

– Liquistation CSFxx (sampler)

– Liquiport CSP44 (sampler)

Basic safety instructions Liquistation CSF48

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance of the measuring system may be

carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Measuring point faults may be repaired only by authorized and specially trained personnel.

Repairs not described in the Operating Instructions provided may only be carried out

directly by the manufacturer or by the service organization.

2.2 Designated use

Liquistation CSF48 is a stationary sampler for liquid media. The samples are taken

discontinuously using a vacuum pump or peristaltic pump or sampling assembly and are then

distributed into sampling containers and refrigerated.

The sampler is designed for use in the following applications:

• Communal and industrial wastewater treatment plants

• Laboratories and water management offices

• Monitoring of liquid media in industrial processes

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted. The manufacturer

is not liable for damage caused by improper or non-designated use.

2.3 Occupational safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable European standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

Liquistation CSF48 Basic safety instructions

Endress+Hauser 7

2.4 Operational safety

1. Before commissioning the entire measuring point, verify that all connections are

correct. Ensure that electrical cables and hose connections are undamaged.

2. Do not operate damaged products, and safeguard them to ensure that they are not

operated inadvertently. Label the damaged product as defective.

3. If faults cannot be rectified:

Take the products out of operation and safeguard them to ensure that they are not

operated inadvertently.

LCAUTION

Cleaning not switched off during calibration or maintenance activities

Risk of injury due to medium or cleaning agent

‣If a cleaning system is connected, switch if off before removing a sensor from the medium.

‣If you wish to check the cleaning function and have therefore not switched off the cleaning

system, please wear protective clothing, goggles and gloves or take other appropriate

measures.

2.5 Product safety

2.5.1 State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

Devices connected to the sampler must comply with the applicable safety standards.

2.5.2 IT security

We only provide a warranty if the device is installed and used as described in the Operating

Instructions. The device is equipped with security mechanisms to protect it against any

inadvertent changes to the device settings.

IT security measures in line with operators' security standards and designed to provide

additional protection for the device and device data transfer must be implemented by the

operators themselves.

Incoming acceptance and product identification Liquistation CSF48

8 Endress+Hauser

3 Incoming acceptance and product identification

3.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify your supplier of any damage to the packaging.

Keep the damaged packaging until the matter has been settled.

2. Verify that the contents are undamaged.

 Notify your supplier of any damage to the delivery contents.

Keep the damaged products until the matter has been settled.

3. Check the delivery for completeness.

 Check it against the delivery papers and your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

The permitted ambient conditions must be observed (see "Technical data").

If you have any questions, please contact your supplier or your local sales center.

NOTICE

Damage to the sampler

If transported incorrectly, the roof may become damaged or tear off.

‣Transport the sampler using a forklift truck. Never lift the sampler by the top. Lift it in the

middle between the upper and lower sections.

3.2 Product identification

Nameplates can be found:

• On the inside of the door

• On the packaging (adhesive label, portrait format)

3.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Firmware version

• Ambient and process conditions

• Input and output values

• Activation codes

• Safety information and warnings

‣Compare the data on the nameplate with your order.

Liquistation CSF48 Incoming acceptance and product identification

Endress+Hauser 9

3.3 Scope of delivery

The scope of delivery comprises:

• 1 Liquistation CSF48 with:

– The ordered bottle configuration

– Optional hardware

• Accessories kit

– For peristaltic or vacuum pump:

Connection nipple for suction line with various angles (straight, 90°), Allen key (for

version with vacuum pump only)

– For sampling assembly:

2 or 3 compressed air lines 5 m each, 1 sample line EPDM 13 mm ID 5 m

• 1 print version of Brief Operating Instructions in the language ordered

• Optional accessories

If you have any questions, please contact your supplier or your local sales center.

3.4 Certificates and approvals

3.4.1  mark

Declaration of Conformity

The product meets the requirements of the harmonized European standards. As such, it

complies with the legal specifications of the EC directives. The manufacturer confirms

successful testing of the product by affixing to it the  mark.

MCERTS

The device has been assessed by Sira Certification Service and complies with "MCERTS

Performance Standards for Water Monitoring Equipment Part 1, Version 2.1 dated November

2009"; certificate no.: Sira MC100176/02.

cCSAus General purpose

The product meets the requirements in accordance with "Class 8721 05, laboratory

equipment, electrical; Class 8721 85, laboratory equipment, electrical, certified to US

standards" for indoor use. Certificate no.: 2318018

Installation Liquistation CSF48

10 Endress+Hauser

4 Installation

4.1 Installation conditions

4.1.1 Dimensions

355 (14.0)

125 (4.9)

903 (35.6)

1258 (49.5)

625 (24.6)

471 (18.5)

816 (32.1)

753 (29.7)

355 (14.0)

125 (4.9)

530 (20.9)

1403 (55.2)

1758 (69.2)

625 (24.6)

471 (18.5)

816 (32.1)

753 (29.7)

A0025857

 1 Dimensions of Liquistation CSF48 plastic version, without/with stand, dimensions in mm (in)

A Suction line connection

Andere Handbücher für Liquistation CSF48

Inhaltsverzeichnis

Andere Endress+Hauser Laborausrüstung Handbücher

Endress+Hauser

Endress+Hauser Liquistation CSF33 Technische Daten

Endress+Hauser

Endress+Hauser Liquistation CSF48 Handbuch

Endress+Hauser

Endress+Hauser analytikjena multi N/C 2100 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena qTOWER3 84 auto Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena multi N/C Bedienungsanleitung

Endress+Hauser

Endress+Hauser ASP Station 2000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena CyBio SELMA Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser ISEmax CAM40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP51 Montageanleitung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TAdvanced Bedienungsanleitung

Endress+Hauser

Endress+Hauser OXY5500 QF Firmware-Update

Endress+Hauser

Endress+Hauser Liquistation CSF33 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline Control CDC90 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TRobot II 96 G Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena UVP Transilluminator Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena APUsim Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena APU 28 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 Technische Daten

Endress+Hauser

Endress+Hauser CPY7 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TSC ThermoShaker Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant MS Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena CyBio QuadPrint HQ-M Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena Biometra TAdvanced Anleitung zur Verwendung

Endress+Hauser

Endress+Hauser Analytik Jena CyBio SELMA Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung