Federal Signal Corporation Global Series Bedienungsanleitung

25500186

Rev. B5 0918

Printed in U.S.A.

Installation and

Maintenance Instructions

Global Series

Model G-LED LED Beacon

For Use in Hazardous Locations

Ex d Surface Mount Ex de Surface Mount

Limited Warranty

This product is subject to and covered by a limited warranty,

a copy of which can be found at www.fedsig.com/SSG-Warranty.

A copy of this limited warranty can also be obtained by written

request to Federal Signal Corporation, 2645 Federal Signal Drive,

University Park, IL 60484, email to [email protected] or

call +1 708-534-3400.

This limited warranty is in lieu of all other warranties, express or

implied, contractual or statutory, including, but not limited to the

warranty of merchantability, warranty of tness for a particular

purpose and any warranty against failure of its essential purpose.

2645 Federal Signal Drive

University Park, IL 60484-3167

www.fedsig.com

Customer Support:1 800-344-4634 • 1 708-534-4756

Technical Support:1 800-755-7621 • 1 708-587-3587

Model G-LED Global Series LED Beacon

Contents

Safety Messages to Installers and Users.......................................................... 5

Certication.......................................................................................................... 6

Unpacking the Beacon ....................................................................................... 7

Creating Combination Fixtures in the Field...................................................... 8

Mounting the G-LED Beacon.............................................................................. 9

Mounting the Surface-Mount Ex d Beacon................................................... 9

Mounting the Ex de Surface-Mount Beacon............................................... 10

Safety Messages for Wiring.............................................................................. 13

Preparing to Wire the Ex d Flameproof Models.............................................. 14

Wiring the Ex d Models .............................................................................. 15

24 Vdc Models ............................................................................................ 15

120-240 Vac Models.................................................................................... 15

Preparing to Wire the Ex de Increased Safety Models................................... 16

Wiring the Ex de Models............................................................................. 17

24 Vdc Models ............................................................................................ 18

120-240 Vac Models.................................................................................... 18

Changing the Flash Pattern.............................................................................. 19

Safety Messages to Maintenance Personnel.................................................. 22

Maintaining the Beacon .................................................................................... 23

Cleaning the Enclosure................................................................................ 23

Replacing the LED Array............................................................................ 23

Lubricating the Threaded Joints.................................................................. 25

Ordering Replacement Parts and Accessories .............................................. 26

Getting Repair Service or Technical Assistance ............................................ 27

Returning the Product for Credit ..................................................................... 27

Model G-LED Global Series LED Beacon

Contents

Tables

Table 1 Replacement parts .................................................................................26

Table 2 Accessories ............................................................................................27

Table 3 Choosing cable-entry devices for Equipment in

Potentially Explosive Atmospheres......................................................................29

Figures

Figure 1 Beacon and sounder combination xture ...............................................8

Figure 2 Front view of Ex d beacon......................................................................9

Figure 3 Side view of Ex d beacon .....................................................................10

Figure 4 Front view of Ex de surface mount....................................................... 11

Figure 5 Side view of Ex de surface mount ........................................................12

Figure 6 IN/OUT PCB connections for Ex d 24 Vdc ...........................................15

Figure 7 IN/OUT PCB connections for Ex d 120-240 Vac ..................................16

Figure 8 Connections for DC or AC Ex de beacons ..........................................18

Figure 9 Location of DIP switch for ash patterns ..............................................21

Figure 10 Switch settings for ash patterns........................................................21

Figure 11 LED array and connector....................................................................24

Installation and Maintenance Instructions

Model G-LED Global Series LED Beacon

Safety Messages to Installers and Users

It is important to follow all instructions shipped with this product. This

beacon is to be installed by a trained electrician who is thoroughly familiar

with and will follow all applicable national and local codes in the country of

use.

This beacon should be considered a part of the warning system and not the

entire warning system.

The selection of the mounting location for the beacon, its controls and the

routing of the wiring are to be accomplished under the direction of the

facilities engineer and the safety engineer. In addition, listed below are some

other important safety instructions and precautions you should follow:

• Read and understand all instructions before installing or operating this

equipment.

• To avoid electrical shock hazards, do not connect wires when power is

applied. Failure to observe this warning may lead to serious injury or

death.

• Never alter the unit in any manner. Safety in hazardous locations may be

endangered if additional openings or other alterations are made in units

specically designed for use in these locations.

• Do not connect this beacon to the system when power is on.

• After installation, ensure that all threaded joints are properly tightened.

• Keep the unit tightly closed when in operation.

• After installation, test the beacon system to ensure that it is operating

properly.

• After testing is complete, provide a copy of this instruction sheet to all

personnel.

• Brass inserts have the potential to store charge when they are not

plugged. Consideration should be taken to prevent these from becoming

a sparking hazard.

Installation and Maintenance Instructions

Model G-LED Global Series LED Beacon

• The lens guard has the potential to store charge. Consideration should be

taken to prevent this from becoming a sparking hazard.

• Establish a procedure to routinely check the beacon system for proper

activation and operation.

• Maximum ash frequency is 90 FPM.

• This equipment is suitable for use in Class I, Division 2, Groups A, B,

C, D; Class II, Division 2, Groups F and G; Class III or non-hazardous

locations only.

• WARNING: EXPLOSION HAZARD — Do not disconnect the

equipment unless power has been switched off or unless the area is

known to be non-hazardous.

• WARNING: EXPLOSION HAZARD — Do not remove or replace the

fuse when energized.

Failure to follow all safety precautions and instructions may result in

property damage, serious injury, or death.

With respect to the potential electrostatic charging hazard as mentioned in the

certicate “Specic Conditions of Use”, under normal conditions of use, these

devices are for xed installations and not generally in contact with people.

The risk of ignition is low. In addition, maintenance, cleaning, and extreme

environmental factors (ex. high velocity dust laden atmospheres or high pressure

steam) should be taken into account by the end user, using local Explosive

Atmosphere (Ex) Electrical installations design, selection, inspection, and

maintenance Codes and Standards. Cleaning of the devices should only be done

with a damp cloth.

Certication

Certicate Nos.: ATEX Cert No.: Baseefa15ATEX0153X

IECEx Cert No.: IECEx BAS 15.0102X

ATEX coding: II 2 G D

Protection: II 2 GD Ex db op is IIC T6 Gb or II 2 GD Ex db e op is IIC T6 Gb

Ex op is tb IIIC T85°C Db IP66 (Tamb= -50°C to + 58°C)

II 2 GD Ex db op is IIC T5 Gb or II 2 GD Ex db e op is IIC T5 Gb

Ex op is tb IIIC T100°C Db IP66 (Tamb= -50°C to + 70°C)

Standards:

N60079-0: 2012 + A11:2013,

EN60079-1:2014

N60079-7: 2007,

EN60079-28: 2007,

EN60079-31:2014, IEC60079-0: 6th Ed.,

IEC 60079-1 7th Ed.,

IEC 60079-7: 4th Ed., IEC60079-31: 2st Ed,

IEC 60079-28:2006

Installation and Maintenance Instructions

Model G-LED Global Series LED Beacon

Specic Conditions of Use:

1. The Modular Visual LED has external non-metallic surfaces which may

provided a potential electrostatic charging hazard.

See the manufacturer’s instructions for further information.

2. The Modular Visual LED has metallic components in the non-metallic

walls of the enclosure which can store electrical charge and therefore

may provide a potential electrostatic charging hazard. The metallic

brass inserts have a capacitance of 14 pF. The metallic guard has a

capacitance of 18 pF. See the manufacturer’s instructions for further

information.

cULus Zone Certications:

Models that contain the Ex e increased safety (E-box) are not cULus Zone

certied and not suitable for use in Class, Zone locations. Only the following

models are certied: G-LED-DC-D-x, G-LED-DC-T-x, G-LED-AC-D-x,

and G-LED-AC-T-x. Please disregard any references to the E-box when

using these instructions for Class, Zone locations.

These models use protections:

Class I, Zone 1, AEx db IIC T3

Zone 21, AEx tb IIIC T3/200°C IP66 (Tamb= -55°C to +70°C)

Ex db IIC T3

Ex tb IIIC T3/200°C IP66 (Tamb= -55°C to +70°C)

Unpacking the Beacon

EXPLOSION HAZARD: A damaged lens can lead to explosions, causing

serious injury or death. If a lens is damaged, it must be replaced.

After unpacking the beacon, examine it for damage that may have occurred

in transit. If it has been damaged, do not attempt to install or operate it.

File a claim immediately with the carrier, stating the extent of the damage.

Carefully check all envelopes, shipping labels, and tags before removing

or discarding them. Disposal of all shipping materials must be carried out

in accordance with national and local codes and standards. If any parts are

missing, please call Federal Signal Customer Support at +1 708-534-4756 or

+1 877-289-3246.

Installation and Maintenance Instructions

Model G-LED Global Series LED Beacon

Creating Combination Fixtures in the Field

The Federal Signal Global Series Ex de products can be connected together

in the eld using interchangeable E-box end caps and a proprietary coupling

system. The proprietary coupling system allows for simple and cost

effective, wiring from product to product, often eliminating the need for

expensive Ex wiring practices and Ex rated glands.

Figure 1 Beacon and sounder combination xture

The E-box is available only when factory installed on an Ex d unit or when

used as a E-box spacer adjoining an existing E-box. Refer to the accessories

listed on page 26 for available options. When creating certain xture

combinations, it is necessary to replace the E-box end caps before mounting

the product. If you are creating combination xtures, refer to instruction

manual 25500259 for specic instructions and details.

A note about combination xtures: If the product is Ex db marked, it is for

use in gas atmospheres. If the product is Ex db e marked, it uses increased-

safety terminal enclosures and is for use in gas atmospheres. The product is

Ex tb marked for use in dust atmospheres.

Installation and Maintenance Instructions

Model G-LED Global Series LED Beacon

Mounting the G-LED Beacon

ATTACH THE BEACON SECURELY: To prevent injury, this apparatus

must be securely attached to the mounting surface in accordance with

the installation instructions. Use installer-supplied fasteners suitable for

the mounting surface.

The mounting method and the installer-supplied mounting hardware depend

on which of the two G-LED models you are installing:

Mounting the Surface-Mount Ex d Beacon

Mount the beacon to a at surface using the four 8.5 mm mounting

holes. Use installer-supplied fasteners suitable for the surface to which

the device will be mounted.

Figure 2 Front view of Ex d beacon

105.9 mm

(4.17 in)

105.9 mm (4.17 in)

Ø105.9 mm (5.27 in)

4X COUNTER-BORED

HOLES TO FIT M8

SOCKET-HEAD

CAP SCREWS

Installation and Maintenance Instructions

Model G-LED Global Series LED Beacon

Figure 3 Side view of Ex d beacon

132.6 mm

(5.22 in)

34.9 mm

(1.38 in)

2X M20 GLAND ENTRIES

190.6 mm (7.50 in)

Mounting the Ex de Surface-Mount Beacon

Mount the beacon to a at surface using the six 8.5 mm mounting holes.

Use installer-supplied fasteners suitable for the surface to which the

device will be mounted.

Andere Handbücher für Global Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Federal Signal Corporation Beleuchtungsausrüstung Handbücher

Federal Signal Corporation

Federal Signal Corporation AD Series Handbuch

Federal Signal Corporation

Federal Signal Corporation STREAMLINE LP3M Kurzanleitung

Federal Signal Corporation

Federal Signal Corporation Cuda TriOptic 352022F Series Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Reliant Handbuch

Federal Signal Corporation

Federal Signal Corporation ILSFFVHL-CH08 Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Split Vision VSLR3 Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation G-STR-024-D-C Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation VIEWPOINT SOLARIS Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation IPX6 IMPAXX Handbuch

Federal Signal Corporation

Federal Signal Corporation VIEWPOINT FVPK Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Cuda TriOptic 351016F Series Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation VITALITE 121 Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Electraray 225 Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation CN SignalMaster FSJoin Handbuch

Federal Signal Corporation

Federal Signal Corporation LED SIGNALMASTER Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation 371DST Handbuch

Federal Signal Corporation

Federal Signal Corporation FB2PST Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation NightSpire Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation SIGNALMASTER SML6-2SML1F Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation SIGNALMASTER SML6-2SML1F Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Vision SLR Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation SignalMaster SMLED-PLS-6 Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Vitalite 121SLED Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation MB-IDENT03 Handbuch

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung