Fujitsu L ETERNUS AF Bedienungsanleitung

FUJITSU Storage

ETERNUS DX, ETERNUS AF

Configuration Guide -Server Connection-

(Fibre Channel) for Oracle Solaris

Driver Settings for Fujitsu Fibre Channel Cards

P3AM-3712-15ENZ0

This page is intentionally left blank.

Preface

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX/AF to a server running Solaris OS and using Fujitsu Fibre Channel cards via a Fibre Channel inter-

face.

This manual is used when performing the setup procedure described in "Installing Drivers and Setting Up the

Server" and "Recognizing the Logical Units" of the "Configuration Guide -Server Connection- (Fibre Channel)

for Oracle Solaris".

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX/AF, server, OS, Fibre Channel cards, and drivers.

Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as

product trademarks and product names. For storage systems that are supported by the OS, refer to the Server

Support Matrix of the ETERNUS DX/AF.

15th Edition

April 2017

The Contents and Structure of this Manual

This manual is composed of the following six chapters and an appendix.

•"Chapter 1 Workflow" (page 5)

This chapter describes the workflow required to establish a connection between a server with Fujitsu Fibre

Channel cards and an ETERNUS DX/AF.

•"Chapter 2 Installing the Fibre Channel Card Driver" (page 7)

This chapter describes how to install the Fibre Channel card driver.

•"Chapter 3 Installing the hddv Driver" (page 8)

This chapter describes how to install the hddv driver that is required when connecting the ETERNUS DX/AF

storage systems and a Fujitsu driver equipped server in a single-path configuration.

•"Chapter 4 Setting Up the Server" (page 9)

This chapter describes how to set up the server for different connection topologies.

•"Chapter 5 Setting Up the Server to Recognize the Logical Units" (page 18)

This chapter describes how to make the server recognize the LUNs of the ETERNUS DX/AF.

•"Chapter 6 Required Driver Parameters" (page 22)

This chapter describes how to set up the Fujitsu Fibre Channel card driver.

An appendix contains the various management tables that are used in "Chapter 4 Setting Up the Server".

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3712-15ENZ0

Table of Contents

Chapter 1 Workflow 5

Chapter 2 Installing the Fibre Channel Card Driver 7

Chapter 3 Installing the hddv Driver 8

Chapter 4 Setting Up the Server 9

4.1 Creating a WWN Instance Management Table for the Server.......................................................... 9

4.2 Creating a WWN Instance Management Table for Storage System ............................................... 12

4.3 Creating a Target Binding Table ................................................................................................... 13

4.4 Setting the Configuration File (fjpfca.conf) .................................................................................. 14

4.5 Re-checking the Settings.............................................................................................................. 14

Chapter 5 Setting Up the Server to Recognize the Logical Units 18

5.1 Recognizing Logical Units with the sd Driver................................................................................ 18

5.1.1 Logical Unit Recognition.....................................................................................................................................18

5.1.2 Getting the Server to Recognize the Logical Units...............................................................................................19

5.2 Recognizing Logical Units with the hddv Driver............................................................................ 21

Chapter 6 Required Driver Parameters 22

6.1 Setting Up the Parameters ........................................................................................................... 22

6.1.1 "fjpfca.conf" Parameter Values............................................................................................................................22

6.1.2 "/kernel/drv/fjpfca.conf" Example........................................................................................................................24

Appendix A Various Management Table Templates 25

A.1 WWN Instance Management Table for the Server ........................................................................ 25

A.2 WWN Instance Management Table for Storage System ................................................................ 25

A.3 Target Binding Table.................................................................................................................... 26

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3712-15ENZ0

Chapter 1

Workflow

This chapter describes the driver settings required to establish a connection between a server with Fujitsu

Fibre Channel cards and an ETERNUS DX/AF.

Workflow

Installing the Fibre Channel Card Driver

Install the driver. Download the proper driver from the Fujitsu web-site as required.

•"Chapter 2 Installing the Fibre Channel Card Driver" (page 7)

•Used for driver installation

-Documentation provided with the product

Creating Various Management Tables

Enter the necessary information in the "WWN Instance Management Table for the Server", "WWN In-

stance Management Table for Storage System", and "Target Binding Table".

•"Chapter 4 Setting Up the Server" (page 9)

•"Appendix A Various Management Table Templates" (page 25)

Editing the Configuration File

Set the driver parameters by editing the configuration file.

•"Chapter 4 Setting Up the Server" (page 9)

•"Chapter 6 Required Driver Parameters" (page 22)

•Check the settings using the "grmpdautoconf" command

-ETERNUS Multipath Driver product manual

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3712-15ENZ0

Setting Up the Server to Recognize the Logical Units (LUNs)

Make the server recognize the ETERNUS DX/AF logical units using the sd driver.

•"Chapter 5 Setting Up the Server to Recognize the Logical Units" (page 18)

After completing all the required procedures in this manual, proceed to "Setting the Multipaths" in

"Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris".

Chapter 1 Workflow

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3712-15ENZ0

Chapter 2

Installing the Fibre Channel Card Driver

Install the Fibre Channel card driver according to the installation guide provided with the Fibre Channel card.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3712-15ENZ0

Chapter 3

Installing the hddv Driver

Use the hddv driver if it is already installed and used. Do not use the hddv driver for new connections.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3712-15ENZ0

Chapter 4

Setting Up the Server

The server setup will vary according to how the ETERNUS DX/AF storage systems and server are to be connec-

ted. Edit the server's configuration file to match the chosen topology. Configuration files may also differ de-

pending on which Fibre Channel cards are to be used.

There are two possible connection topologies: direct connection and switch connection. Procedures are de-

scribed below. Also refer to the FUJITSU PCI Fibre Channel manuals as necessary.

●For direct connection

Instance name data of the Fibre Channel card is necessary. Refer to the following sections to set.

•"4.1 Creating a WWN Instance Management Table for the Server" (page 9)

•"4.2 Creating a WWN Instance Management Table for Storage System" (page 12)

•"4.4 Setting the Configuration File (fjpfca.conf)" (page 14)

•"4.5 Re-checking the Settings" (page 14)

●For switch connection

The Fibre Channel card Instance name, target WWN, and target ID information are necessary. Check each

item and enter them in the table. Edit the configuration file according to those information and make set-

tings.

Refer to the following sections to set.

•"4.1 Creating a WWN Instance Management Table for the Server" (page 9)

•"4.2 Creating a WWN Instance Management Table for Storage System" (page 12)

•"4.3 Creating a Target Binding Table" (page 13)

•"4.4 Setting the Configuration File (fjpfca.conf)" (page 14)

•"4.5 Re-checking the Settings" (page 14)

4.1 Creating a WWN Instance Management Table for the Server

Create a "WWN instance management table for the server" with information regarding the Fibre Channel

card.

Determine the following information for each Fibre Channel card installed in the server and enter it into a

copy of the "WWN instance management table for the server" (provided in "Appendix A Various Management

Table Templates" (page 25)).

•Physical slot name

•WWN

•Instance name

•Physical path name

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3712-15ENZ0

Table 4.1 WWN Instance Management Table for the Server

Physical slot name WWN Instance name Physical path name

1Check the instance names.

"fjpfca + instance number" is the format used to represent Fibre Channel card instance names.

The instance number that corresponds to the physical path in which the Fibre Channel card is installed

is stored in the "/etc/path_to_inst" file at the Fibre Channel card driver installation. Extract the necessary

lines using the "grep" command.

# grep "fjpfca" /etc/path_to_inst

Example:

"/pci@6,4000/fibre-channel@2" 1 "fjpfca"

"/pci@4,2000/fibre-channel@1" 0 "fjpfca"

(1) (2)

(1) indicates the physical path name and (2) indicates the instance number.

"fjpfca1" is the instance name of the "/pci@6,4000/fibre-channel@2" path Fibre Channel card.

"fjpfca0" is the instance name of the "/pci@4,2000/fibre-channel@1" path Fibre Channel card.

2Enter the results in "Instance name" and "Physical path name" columns of the "WWN instance manage-

ment table for the server".

Physical slot name WWN Instance name Physical path name

/pci@4,2000/fibre-channel@1

/pci@6,4000/fibre-channel@2

fjpfca0

fjpfca1

3Check the WWN of each Fibre Channel card.

Execute the following command to check the WWN that corresponds to the Fibre Channel card instance

name.

# /usr/sbin/FJSVpfca/fc_info -a

"adapter=fjpfca#x" ("x" is instance number) is the format used to represent Fibre Channel card instant

names. The WWN corresponding to the instance name is displayed after "wwn=".

Chapter 4 Setting Up the Server

4.1 Creating a WWN Instance Management Table for the Server

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris

P3AM-3712-15ENZ0

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu FUTRO Z220 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX330 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY DX920 S3 Handbuch

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Bedienungsanleitung

Fujitsu

Fujitsu Primepower200 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Merkblatt

Fujitsu

Fujitsu PRIMERGY RX600 S6 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Leitfaden

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S5 Bedienungsanleitung

Fujitsu

Fujitsu SE500 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX600 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX100 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2520 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S5 Betriebsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Fujitsu l ETERNUS AF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken