Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

P/N: 1802056001016

*1802056001016*

NPort 5600-8-DT

Quick Installation Guide

Version 5.1, January 2020

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The NPort 5600-8-DT Series includes the following models:

•NPort 5610-8-DT: 8 ports, RS-232, DB9

•NPort 5610-8-DT-T: 8 ports, RS-232, DB9, -40 to 75°C operating

temperature

•NPort 5610-8-DT-J: 8 ports, RS-232, RJ45

•NPort 5650-8-DT: 8 ports, RS-232/422/485, DB9

•NPort 5650-8-DT-T: 8 ports, RS-232/422/485, DB9, -40 to 75°C

operating temperature

•NPort 5650-8-DT-J: 8 ports, RS-232/422/485, RJ45

•NPort 5650I-8-DT: 8 ports, RS-232/422/485, DB9, optical isolation

•NPort 5650I-8-DT-T: 8 ports, RS-232/422/485, DB9, optical

isolation, -40 to 75°C operating temperature

Package Checklist

The NPort 5600-8-DT package should contain the following items:

•1 x NPort 5600-8-DT 8-port serial device server

•1 x 100 to 240 VAC power adapter (excluding –T models)

•1 x power cord

•1 x Ethernet cable: CBL-RJ458P-100

•1 x wall-mount kit

•Quick installation guide

•Warranty card

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If your application is out of this range, please

use a power adapte

r supplied by UL Listed External Power

Supply (The power output meets SELV and LPS and rated 12

48 VDC, minimum current 0.73 A).

Optional Accessories:

•DK-35A: DIN rail mounting kit (35 mm)

•CBL-RJ45M9-150: 8-pin RJ45 to male DB9 cable, 150 cm

•CBL-RJ45F9-150: 8-pin RJ45 to female DB9 cable, 150 cm

•CBL-RJ45M25-150: 8-pin RJ45 to male DB25 cable, 150 cm

•CBL-RJ45F25-150: 8-pin RJ45 to female DB25 cable, 150 cm

•NP21101: DB25-M to DB9-F RS-232 cable, 30 cm

Please notify your sales representative if any of the above items are

missing or damaged.

- 3 -

Hardware Introduction

Top and Rear View

Front View (NPort 5610-8-DT, NPort 5610-8-DT-T, NPort 5650-

8-DT, NPort 5650-8-DT-T, NPort 5650I-8-DT, NPort 5650I-8-DT-

Front View (NPort 5610-8-DT-J, 5650-8-DT-J)

Reset Button

The reset button is used to load the factory defaults. Use a pointed

object to hold the reset button down for five seconds. You may release

the reset button when the Ready LED stops blinking.

- 4 -

LED Indicators

The LED indicators on the top panel are used to display status as

follows:

Name

Color

Function

PWR

Red

Power is on.

Off

Power is off.

Ready Green

Steady:

NPort is operational

Blinking:

NPort is responding to NPort

Administrator “Locate” function

Off

Power is off or fault condition exists.

Fault Red

IP conflict or DHCP or BOOTP server did not

respond properly.

Off

No fault condition detected.

ETH1

Green

Steady:

Network is connected, no data is

being transmitted.

Blinking:

Network is connected, data is

being transmitted.

Off

Ethernet cable is disconnected or has a

short.

ETH2

Green

Steady:

Network is connected, no data is

being transmitted.

Blinking:

Network is connected, data is

being transmitted.

Off

Ethernet cable is disconnected or has a

short.

InUse

(P1 to P8)

Green Serial port has been opened by server side

software.

Off

Serial port is not currently opened by

server side software.

Tx/Rx

(P1 to P8)

Green (Tx)

Serial device is transmitting data.

Orange (Rx)

Serial device is receiving data.

Off

No data is flowing to or from the serial

port.

Hardware Installation

STEP 1: After removing the NPort 5600-8-DT from the box, place it on

a desktop or other horizontal surface. Connect the 12-48 VDC power

adaptor to the NPort 5600-8-DT’s power input when using an AC power

source, or connect the NPort 5600-8-DT’s terminal block directly to a

DC power source.

STEP 2: Use an Ethernet cable to connect the NPort 5600-8-DT to a

network hub or switch. You can also connect directly to your computer’s

Ethernet port, which is convenient for initial configuration or testing.

STEP 3: Connect the NPort 5600-8-DT’s serial port to a serial device.

Wall or Cabinet Mounting

The NPort 5600-8-DT comes with two metal attachment plates to allow

installation on a wall or the inside of a cabinet. First, attach the

brackets to the back of the NPort with screws. Next, mount the unit on

a wall or cabinet with screws.

- 5 -

Screws should be less than 6.0 mm in head diameter, and less than 3.5

mm in shaft diameter.

DIN Rail Mounting

DIN-rail attachments can be purchased separately to attach the product

to a DIN-rail. The DIN-rail attachments should be oriented with the

metal springs on top.

Standard Attachment

DK-35A Attachment

Pull High/Low Resistors for RS-485

Use the set of DIP switches on the bottom panel to set the pull high/low

resistor values for each serial port. To access the switches, remove the

screws holding the DIP switch cover in place and flip open the cover.

There are three DIP switches for each port’s pull high/low resistors:

Pull High

Pull Low

Terminator

1KΩ

120Ω

Default



OFF

150KΩ

–

Software Installation Information

For the NPort’s configuration, the default IP address of the NPort is:

LAN: Static IP = 192.168.127.254; netmask = 255.255.255.0

You may log in with the username admin and password moxa to

change any settings to meet your network topology (e.g., IP address)

or serial device (e.g., serial parameters). If you would like to apply Real

COM mode to your application, you will need to install the NPort’s driver

on your desktop. You may also refer to Moxa’s support website

https://www.moxa.com/support/ for user’s manual, driver, Device

Search Utility, and so on.

- 6 -

NOTE

For security-related configuration, please refer to the manual’s

Cybersecurity Considerations chapter.

NOTE

For the NPort with DB Male serial ports, you may refer to the

DB9 Male Ports pin assignment section to loop back pin 2 and

pin 3 for the RS

-232 interface to carry out a self test on the

device.

Pin Assignments and Cable Wiring

RJ45 Ports (NPort 5610-8-DT-J, 5650-8-DT-J)

Pin RS-232

RS-422

4-wire RS-485

2-wire RS-

485

DSR

–

RTS

TxD+

–

GND

TxD

TxD-

–

RxD

RxD+

Data+

DCD

RxD-

Data-

CTS

–

DTR

–

NOTE

The NPort 5610-8-DT-J supports RS-232 only.

DB9 Male Ports (NPort 5610-8-DT, 5650-8-DT, 5650I-8-DT)

Pin RS-232

RS-422

4-wire RS-485

2-wire RS-

485

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

NOTE

The NPort 5610-8-DT supports RS-232 only.

RS-232 Cables

NPort

Serial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

DSR

DTR

RTS

CTS

GND

TxD

RxD

- 7 -

RxD

TxD

DCD

CTS

RTS

DTR

DSR

RS-422, 4-wire RS-485 Cables

NPort

Serial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

TxD+

RxD+

GND

TxD-

RxD-

RxD+

TxD+

RxD-

TxD-

2-wire RS-485 Cables

NPort

Serial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

GND

Data+

Data-

Specifications

Power Requirements

Input Voltage

12 to 48 VDC

NPort 5610-8-DT/NPort 5610-8-DT-T:

611 mA @ 12 VDC, 300 mA @ 24 VDC, 140

mA @ 48V

NPort 5610-8-DT-J: 611 mA @ 12 VDC,

300 mA @ 24 VDC, 140 mA @ 48V

NPort 5650-8-DT/NPort 5650-8-DT-T:

615 mA @ 12 VDC, 300 mA @ 24 VDC, 156

mA @ 48V

NPort 5650-8-DT-J: 615 mA @ 12 VDC,

300 mA @ 24 VDC, 156 mA @ 48V

NPort 5650I-8-DT/NPort 5650I-8-DT-T:

1,066 mA @ 12 VDC, 510 mA @ 24 VDC, 200

mA @ 48V

Certifications

Regulatory Approvals

FCC Class A, CE Class A, UL, CUL, LVD

Andere Handbücher für NPort 5600-8-DT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies NPort Z2150 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-M-SC-RM Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME50-M-SC Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort D351 Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-P101 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1180I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 351 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 364A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 464 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME61 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-S-ST-RM Bedienungsanleitung

Moxa Technologies

Moxa Technologies CSM-400 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MIINEPORT E1 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5110A Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 351 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1400 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101G Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 2210 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung