NordicTrack NTEL4255.2 Bedienungsanleitung

Model No. NTEL4255.2

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this man-

ual for future reference.

Write the serial number in the space

above for future reference.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if parts are

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL-FREE:

1-888-825-2588

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:

www.nordictrackservice.com

USER'S MANUAL

Serial

Number

Decal

Visit our website at

www.nordictrack.com

new products, prizes,

fitness tips, and much more!

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO USE THE CHEST PULSE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

ELLIPTICAL EXERCISER OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

TABLE OF CONTENTS

NordicTrack is a registered trademark of ICON IP, Inc.

1. Read all instructions in this manual and all

warnings on the elliptical exerciser before

using the elliptical exerciser.

2. It is the responsibility of the owner to ensure

that all users of the elliptical exerciser are

adequately informed of all precautions.

3. Use the elliptical exerciser only as described

in this manual.

4. The elliptical exerciser is intended for home

use only. Do not use the elliptical exerciser in

a commercial, rental, or institutional setting.

5. Keep the elliptical exerciser indoors, away

from moisture and dust. Place the elliptical

exerciser on a level surface, with a mat be-

neath it to protect the floor or carpet. Make

sure that there is enough clearance around

the elliptical exerciser to mount, dismount,

and use it.

6. Inspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

7. Keep children under age 12 and pets away

from the elliptical exerciser at all times.

8. The elliptical exerciser should not be used by

persons weighing more than 350 pounds.

9. Always hold the handlebars when mounting,

dismounting, or using the elliptical exerciser.

10. Keep your back straight when using the ellip-

tical exerciser; do not arch your back.

11. If you feel pain or dizziness while exercising,

stop immediately and begin cooling down.

12. Wear appropriate exercise clothes and ath-

letic shoes while using the elliptical exer-

ciser.

13. The pulse sensors are not medical devices.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensors are intended

only as exercise aids in determining heart

rate trends in general.

14. When you stop exercising, allow the pedals

to slowly come to a complete stop. The ellip-

tical exerciser does not have a free wheel;

the pedals will continue to move until the fly-

wheel stops.

15. The battery pack contains materials that are

considered hazardous to the environment.

Proper disposal of the battery is required by

federal law.

16. The decal shown below has been placed on

the elliptical exerciser. If the decal is missing

or illegible, call the toll-free telephone num-

ber on the front cover of this manual and

order a free replacement decal. Apply the

decal in the location shown.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precau-

tions before using the elliptical exerciser.

Handlebar

Console

Levelling Foot

Handgrip Pulse Sensor

Water Bottle Holder*

*No water bottle is included

Wheel

Pedal

Handle

Congratulations for selecting the new NordicTrack®

EX 1000 COMMERCIAL PRO elliptical exerciser.

The EX 1000 COMMERCIAL PRO elliptical exerciser

is an incredibly smooth exerciser that moves your feet

in a natural elliptical path, minimizing the impact on

your knees and ankles. And the EX 1000 elliptical ex-

erciser offers an array of features designed to help you

achieve your fitness goals in the convenience and pri-

vacy of your home.

For your benefit, read this manual carefully before

you use the elliptical exerciser. If you have ques-

tions after reading this manual, please see the front

cover of this manual. To help us assist you, note the

product model number and serial number before call-

ing. The model number is NTEL4255.2. The serial

number can be found on a decal attached to the ellipti-

cal exerciser (see the front cover of this manual for the

location of the decal).

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

BEFORE YOU BEGIN

M8 Nylon

Locknut (72)–4

M10 Split

Washer (85)–20

M10 Washer

(67)–14

M8 Small

Washer (18)–4

M8 Washer

(69)–4

M8 x 55mm Bolt

Set (92)–2

M10 x 116mm Carriage Bolt (38)–2

M8 x 38mm Button

Screw (58)–4

Wave Washer

(88)–4

M10 x 123mm Button Screw (87)–2

M10 Nylon

Locknut (70)–2

M4 x 16mm

Bolt (47)–4

Thrust Washer

(66)–4

M10 x 13mm Button

Screw (54)–14

M10 x 65mm Bolt

Set (94)–2

M8 x 19mm Button

Screw (56)–4

M10 x 25mm Patch

Screw (48)–4

M4 x 22mm

Screw (57)–2

Assembly requires two persons. Set the elliptical exerciser in a cleared area and remove all packing materials.

Do not dispose of the packing materials until assembly is completed. Assembly can be completed using the in-

cluded hex keys and your own adjustable wrench .

Use the drawings below to identify the small parts used for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST on page 24. The number following the key number is

the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in

the parts bag, check to see if it has been preassembled.

ASSEMBLY

Attach the Stabilizer (8) to the Frame (1) with two

M10 x 116mm Carriage Bolts (38) and two M10

Nylon Locknuts (70).

2. Have another person hold the Upright (2) in the po-

sition shown. Connect the Upper Wire Harness (77)

to the Lower Wire Harness (78).

Attach the Upright (2) to the Frame (1) with four

M10 x 25mm Patch Screws (48) and four M10 Split

Washers (85). Make sure that no wires are

pinched between the Upright and the Frame.

3. Attach the Track Frame (4) to the Frame (1) with

two M10 x 123mm Button Screws (87) and two

M10 Split Washers (85). Finger tighten a Button

Screw into the lower hole first, and then finger

tighten a Button Screw into the upper hole. Then,

tighten both Button Screws. Note: This step may be

easier if you raise the Frame a few inches in the lo-

cation shown by the arrow at the right while you at-

tach the Track Frame.

To make assembly easier, read the informa-

tion on page 5 before you begin assembling

the elliptical exerciser.

4. Apply a small amount of the included grease to the

sides of two Wave Washers (88) and two Thrust

Washers (66).

Slide a Weld Spacer (89) onto the Left Crank Arm

(83). Next, identify the Left Track Arm (12), which

is marked with an “L.” Orient the Left Track Arm as

shown, and slide it onto the Left Crank Arm. Then,

slide a Wave Washer (88) on the end of the Left

Crank Arm.

Slide an M8 Small Washer (18) and an Axle Cap

(41) onto an M8 x 19mm Button Screw (56). Next,

slide a Thrust Washer (66) onto the shoulder of

the Axle Cap. Then, tighten the Button Screw into

the end of the Left Crank Arm (83). Make sure

that the Thrust Washer remains on the shoul-

der of the Axle Cap, and that the Wave Washer

(88) remains on the end of the Left Crank Arm.

Repeat this step to attach the Right Track Arm

(11) to the right side of the elliptical exerciser.

5. Attach a Pedal (21) to the Left Pedal Leg (14) with

seven M10 x 13mm Button Screws (54), seven

M10 Split Washers (85), and seven M10 Washers

(67).

Attach the other Pedal (not shown) to the Right

Pedal Leg (not shown) in the same way.

6. Apply a thin film of grease to the barrel of an M10 x

65mm Bolt Set (94). Next, fit the bracket on the

Left Pedal Leg (14) onto the bracket on the Left

Track Arm (12). Attach the Left Pedal Leg to the

Left Track Arm with the Bolt Set.

Attach the Right Pedal Leg (not shown) to the

Right Track Arm (not shown) in the same way.

Grease

7. Identify the Left Handlebar (19), which is marked

with an “L.” Insert the Left Handlebar into one of

the Handlebar Legs (17). Next, turn the Left

Handlebar and the Handlebar Leg so that the

wide side of the pivot tube on the Left

Handlebar is above the hexagonal holes in the

Handlebar Leg. Attach the Left Handlebar with two

M8 x 38mm Button Bolts (58) and two M8 Nylon

Locknuts (72). Make sure that the Nylon

Locknuts are inside of the hexagonal holes. Do

not tighten the Button Bolts yet.

Assemble the Right Handlebar (20) and the other

Handlebar Leg (17) in the same way.

19 20

58 58

17 17

8. Apply a small amount of grease to the sides of two

Wave Washers (88) and two Thrust Washers (66).

Slide the Left Handlebar (19) onto the Handlebar

Axle (16) as shown. Next, slide a Wave Washer

(88) onto the end of the Handlebar Axle.

Slide an M8 Small Washer (18) and an Axle Cap

(41) onto an M8 x 19mm Button Screw (56). Next,

slide a Thrust Washer (66) onto the shoulder of

the Axle Cap. Then, tighten the Button Screw into

the end of the Handlebar Axle (16). Make sure

that the Thrust Washer remains on the shoul-

der of the Axle Cap, and that the Wave Washer

(88) remains on the end of the Handlebar Axle.

Assemble the Right Handlebar (20) in the same

way. Then, tighten both M8 x 19mm Button Screws

(56) at the same time.

Hexagonal

Holes

Wide side of

pivot tube

Grease

9. Apply a film of grease to the barrel of an M8 x 55mm

Bolt Set (92) and to a 7mm Spacer (55). Slide an

M8 Washer (69) and the Spacer onto the barrel.

While another person holds the front end of the

Left Pedal Leg (14) inside of the bracket on the left

Handlebar Leg (17), insert the barrel of the Bolt

Set (92) through both parts. Next, slide a 7mm

Spacer (55) and an M8 Washer (69) onto the end

of the barrel of the Bolt Set. Then, turn the screw

of the Bolt Set a few turns into the barrel. Do not

overtighten the Bolt Set; the left Handlebar Leg

must be able to pivot freely.

Attach the right Handlebar Leg (not shown) to the

Right Pedal Leg (not shown) in the same way.

See step 7. Tighten the four M8 x 38mm Button

Bolts (58).

10. While another person holds the Console (74) near

the Upright (2), connect the Pulse Jumper Wire

(76) to the console pulse wire, and connect the

Upper Wire Harness (77) to the console wire har-

ness. Insert the excess wires into the Upright.

Hold the Console (74) against the Upright (2).

Make sure that no wires are pinched. Attach the

Console with four M4 x 16mm Screws (47).

17 92

55 69

47 77

11. Attach the Water Bottle Holder (26) to the Frame

(1) with two M4 x 22mm Screws (57). 11

Grease

12. Make sure that all parts of the elliptical exerciser are properly tightened. Cover the floor beneath the el-

liptical exerciser to protect the floor from damage. Note: Some extra hardware may be left over.

To get the best performance from the chest pulse sen-

sor, please read the instructions below.

HOW TO PUT ON THE CHEST PULSE SENSOR

The chest pulse sensor consists of two components:

the chest strap and the sensor unit. Follow the steps

below to put on the chest pulse sensor.

See the inset drawing above. Insert the tab on one end

of the chest strap through the hole in one end of the

sensor unit as shown. Make sure that the tab is flush

with the sensor unit.

Wrap the chest

pulse sensor

around your

chest. Attach the

free end of the

chest strap to

the sensor unit

as described

above. Adjust the length of the chest strap, if neces-

sary. The chest pulse sensor should be under your

clothing, against your skin, and as high under the pec-

toral muscles or breasts as is comfortable. Make sure

that the logo is facing forward and is right-side-up.

Pull the sensor

unit away from

your body a few

inches and lo-

cate the two

electrode areas

on the inner

side. Using a saline solution such as saliva or contact

lens solution, wet both electrode areas. Then, return

the sensor unit to a position against your chest.

CHEST PULSE SENSOR TROUBLESHOOTING

If the chest pulse sensor does not function prop-

erly, or if the displayed heart rate is excessively

high or low, try the steps below.

• Make sure that the chest pulse sensor is worn ex-

actly as described at the left. If the chest pulse sen-

sor does not function when positioned as described,

move it slightly lower or higher on your chest.

• Each time you use the chest pulse sensor, use

saline solution such as saliva or contact lens solution

to wet the two electrode areas on the sensor unit. If

heart rate readings do not appear until you begin

perspiring, re-wet the electrode areas.

• Make sure that you are within arm’s length of the

console. For the console to display heart rate

readings, the user must be within arm’s length of

the console.

• The chest pulse sensor is designed to work with

people who have normal heart rhythms. Heart rate

reading problems may be caused by medical condi-

tions such as premature ventricular contractions

(pvcs), tachycardia bursts, and arrhythmia.

• The operation of the chest pulse sensor can be af-

fected by magnetic interference caused by high

power lines or other sources. If it is suspected that

magnetic interference may be causing a problem,

try relocating your exercise equipment.

• If the chest pulse sensor still does not function prop-

erly, test the chest pulse sensor in the following way:

Hold the chest

pulse sensor

and place your

thumbs over

the electrode

areas as

shown.

Chest Strap

Sensor Unit

Tab

Buckle

Electrode Areas

Sensor

Unit

Electrode Areas

Logo

HOW TO USE THE CHEST PULSE SENSOR

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NordicTrack Ellipsentrainer Handbücher

NordicTrack

NordicTrack E11.0 Elliptical Bedienungsanleitung

NordicTrack

NordicTrack Cx 1055 Elliptical Exerciser Bedienungsanleitung

NordicTrack

NordicTrack 14.0 Elliptical Bedienungsanleitung

NordicTrack

NordicTrack E480 Bedienungsanleitung

NordicTrack

NordicTrack E 7.2 Elliptical null

NordicTrack

NordicTrack E10 REAR DRIVE NTEVEL89909.2 Bedienungsanleitung

NordicTrack

NordicTrack NTEL07808.1 Bedienungsanleitung

NordicTrack

NordicTrack E4.2 Elliptical Einrichtungshandbuch

NordicTrack

NordicTrack 1300 Elliptical Benutzerhandbuch

NordicTrack

NordicTrack NTEL00607.0 Bedienungsanleitung

NordicTrack

NordicTrack E4.1 Elliptical null

NordicTrack

NordicTrack E9.0 NTEL01011.0 Bedienungsanleitung

NordicTrack

NordicTrack E4.0 Elliptical Handbuch

NordicTrack

NordicTrack Elite 11.0 NTEVEL99915.0 Bedienungsanleitung

NordicTrack

NordicTrack Commercial 14.9 Bedienungsanleitung

NordicTrack

NordicTrack C7.5 Bedienungsanleitung

NordicTrack

NordicTrack 9600 El Trainerelliptical Bedienungsanleitung

NordicTrack

NordicTrack E 11.5 Elliptical Bedienungsanleitung

NordicTrack

NordicTrack E 11.5 Elliptical Bedienungsanleitung

NordicTrack

NordicTrack E5.7 NTELO5011.0 Bedienungsanleitung

NordicTrack

NordicTrack A.c.t. 10 Elliptical Bedienungsanleitung

NordicTrack

NordicTrack Audiostrider Cx650 Elliptical Bedienungs- und Wartungshandbuch

NordicTrack

NordicTrack Audiostrider 900 Elliptical Bedienungs- und Wartungshandbuch

NordicTrack

NordicTrack Cxt 950 Elliptical Bedienungsanleitung

Beliebte Ellipsentrainer Handbücher anderer Marken

Weslo

Weslo Momentum 4.0 Elliptical Bedienungs- und Wartungshandbuch

Progear Fitness

Progear Fitness Air elliptical pro 1307 Bedienungsanleitung

Torque Fitness

Torque Fitness XPLLP Bedienungsanleitung

Octane Fitness

Octane Fitness PRO3700C Bedienungsanleitung

Xterra

Xterra FS5.8e Bedienungsanleitung

Bodyguard

Bodyguard E-40 Bedienungsanleitung

Bonn Germany

Bonn Germany Concept 2.2 Bedienungsanleitung

Precor

Precor Resolute RSL 620 Bedienungsanleitung

Vision Fitness

Vision Fitness X6600iNetTV Bedienungsanleitung

Matrix

Matrix MX-A5x Bedienungsanleitung

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung

Sears

Sears FREE SPIRIT C249 30737 0 Bedienungsanleitung

True

True FS-64 Bedienungsanleitung

Sport-thieme

Sport-thieme ST 310 Bedienungsanleitung

VIRTUFIT

VIRTUFIT CTR 1.1 Bedienungsanleitung

Kettler

Kettler GIRO C 1 Bedienungsanleitung

CIRCLE FITNESS

CIRCLE FITNESS E7 Bedienungsanleitung

Reebok

Reebok 1000 Zx Elliptical Bedienungsanleitung