NordicTrack CEX22522 Bedienungsanleitung

USER'S MANUAL

CAUTION

Read all precautions and in-

structions in this manual before

using this equipment. Keep this

manual for future reference.

Model No. CEX22522

Model No. CEX25022

Serial No.

The serial number is found in the

location shown below. Write the

serial number in the space above.

QUESTIONS?

At FreeMotion Fitness,we’re

committed to providing complete

customer satisfaction. For assis-

tance, call Customer Care toll-

free at:

1-800-201-2109

Mon.–Fri., 8 a.m.–5 p.m. MST

Serial

Number

Decal

SECTION 1 Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

How to Assemble the Recumbent Bike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

How to Set Up the Recumbent Bike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

How to Upgrade the Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

SECTION 2 How to Use the Basic Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

How to Use the Workout TV Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

SECTION 3 Maintenance and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

SECTION 4 Exercise Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

SECTION 5 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Exploded Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

How to Order Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

TABLE OF CONTENTS

NordicTrack is a registered trademark of ICON IP, Inc.

1. It is the responsibility of the owner to ensure

that all users of the recumbent bike are

adequately informed of all warnings and

precautions.

2. Operate the recumbent bike only as described

in this manual.

3. Do not operate the recumbent bike until it is

properly assembled (see HOW TO ASSEMBLE

THE RECUMBENT BIKE on page 5).

4. Keep the recumbent bike indoors, away from

moisture and dust. Do not place the recum-

bent bike in a garage or covered patio or near

water.

5. Place the recumbent bike on a level surface.

To protect the floor or carpet from damage,

place a mat beneath the recumbent bike.

6. Regularly inspect and tighten all parts of the

recumbent bike.

7. Keep children under the age of 12 and pets

away from the recumbent bike at all times.

8. The recumbent bike should not be used by

persons weighing more than 350 pounds.

9. Always wear appropriate exercise clothes and

athletic shoes when operating the recumbent

bike. Do not wear loose clothes that could be-

come caught on the recumbent bike.

10. Do not modify the power cord or use an

adapter to connect the power cord to an im-

proper receptical. Keep the power cord away

from heated surfaces. Do not use an extension

cord.

11. Keep your back straight when using the re-

cumbent bike; do not arch your back.

12. If you feel pain or dizziness while exercising,

stop immediately and cool down.

13. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

WARNING:To reduce the risk of serious injury, read the following important precautions

and information before operating the recumbent bike.

IMPORTANT PRECAUTIONS

WARNING:Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

Congratulations for selecting the revolutionary Nordic-

Track®9600 recumbent bike. The NordicTrack 9600

recumbent bike offers an impressive array of features

tomake your workouts more effective and enjoyable.

For your benefit, read this manual carefully before

using the NordicTrack 9600 recumbent bike.If you

have questions after reading this manual, please call

Customer Care toll-free at 1-800-201-2109, Monday

through Friday, 8 a.m. until 5 p.m. Mountain Time

(excluding holidays). To help us assist you, please

note your product model number and serial number

before calling. The model number of your recumbent

bike is CEX22522 or CEX25022. The serial number

can be found on a decal attached to the recumbent

bike (see the front cover of this manual for the location

of the decal).

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Handlebar

CD/Accessory Tray

Console

Leveling Foot

BEFORE YOU BEGIN

Handgrip Pulse Sensor

Water Bottle Holder*

*No water bottle is included

FRONT

REAR

Backrest

Seat

Wheel

Pedal/Strap

Seat Latch

RIGHT SIDE

Assembly requires two persons. Set the recumbent bike in a cleared area and remove all packing materials. Do

not dispose of the packing materials until assembly is completed. Assembly can be completed using the

included tools.

Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each

drawing refers to the key number of the part. The second number refers to the quantity needed for assembly.

HOW TO ASSEMBLE THE RECUMBENT BIKE

1. Push the excess console wiring down into the

Frame (1). Attach the Handlebar (3) to the Frame

with four 3/8” x 1/2” Button Screws (74). Make sure

that the wiring is not pinched between the

Handlebar and the Frame.

Console

Wires

2. Attach the Seat Back (10) to the Seat Carriage (5)

with four 1/4” x 3/4” Socket Screws (64).

1/4” x 3/4” Button

Screw (67)–4 3/8” x 3/4” Button

Screw (81)–2 3/8” x 1 1/4” Button

Screw (76)–4

1/4” x 3/4” Socket

Screw (64)–4 3/8” x 1/2” Button

Screw (74)–4

3. Attach the Seat Handlebar (6) to the Seat Carriage

(5) with four 3/8” x 1 1/4” Button Screws (76) and

two 3/8” x 3/4” Button Screws (81). Next, insert the

Pulse Plug (78) into the pulse jack near the top of

the Right Side Shield (8).

876

4. Attach the Seat (9) to the Seat Carriage (5) with

four 1/4” x 3/4” Button Screws (67). Insert the four

1/2” Round Endcaps (80) into the indicated holes in

the Seat Handlebar (6).

67 67

680

HOW TO MOVE AND LEVEL THE RECUMBENT

BIKE

Before moving the recumbent bike, make sure

that the power cord is unplugged. Note: If a CATV

cable is connected to the recumbent bike, it may be

necessary to disconnect the cable if the recumbent

bike will be moved far.

Due to the size and weight of the recumbent bike,

moving it requires two persons. While one person

lifts the indicated end, firmly hold the handlebar and

tip the recumbent bike forward until it rolls on the

front wheels. Carefully move the recumbent bike to

the desired location and then lower it back to the

level position. CAUTION: To reduce the risk of in-

jury, use extreme caution while moving the re-

cumbent bike. Do not attempt to move the re-

cumbent bike over uneven surfaces.

If the recumbent bike rocks slightly during use, turn

the leveling feet under the rear of the frame until the

rocking motion is eliminated.

HOW TO ADJUST THE SEAT

To adjust the seat, lift the seat latch, slide the seat

forward or backward to the desired position, and then

push the seat latch back down.

HOW TO CONNECT THE POWER CORD

If the recumbent bike has a Basic console, it can be used with or

without the included power cord. Ifthe recumbent bike has a

Workout TV console, the power cord must be used for the TV to be

operated.

To use the power cord, first plug one end of the power cord into the

jack on the front of the recumbent bike. Plug the other end of the

power cord into an appropriate outlet that is properly installed in ac-

cordance with all local codes and ordinances.

Seat

Latch

HOW TO SET UPTHE RECUMBENT BIKE

Lift

Here

Wheels

Handlebar

Power

Cord

Jack

Leveling

Feet

HOW TO CONNECT A CATV CABLE

Ifyour recumbent bike has a Workout TV console, a CATV cable

must be connected to the recumbent bike for cable TV stations to

beviewed.

Locate the cable jack on the front of the recumbent bike. Connect

the CATV cable to the cable jack.

Asatellite receiver, VCR, or DVD player can also be connected to

the recumbent bike. Connect a CATV cable from the coaxial output

on your equipment (usually labeled TV OUT or RF OUT) to the

cable jack. Note: Audio/video equipment without coaxial outputs

(some satellite receivers and DVD players) will require an RF modulator to operate with the recumbent bike. RF

modulators and external CATV cables are not available from FreeMotion Fitness, but are available at electronics

stores. See the owner's manual included with the equipment you wish to connect to see whether an RF modula-

tor is needed.

Cable Jack

Your recumbent bike has been pre-configured to operate with a Basic console and a Workout TV console (see

the drawings below). To learn about the features of the Basic console, see page 9. For information about the

state-of-the-art Workout TV console, see page 23.

To upgrade your console and expand the capabilities of your recumbent bike whenever you choose,

simply contact your local FreeMotion Fitness Sales Representative or call FreeMotion Fitness toll-free at

1-877-363-8449.

HOW TO UPGRADE THE CONSOLE

Basic

Console Workout TV

Console

FEATURES OF THE CONSOLE

The Basic console offers an impressive array of fea-

tures to help you get the most from your exercise.

When the manual mode of the console is selected, the

resistance of the pedals can be changed with a touch

of a button. As you exercise, the console will provide

continuous exercise feedback. You can even measure

your heart rate using the built-in pulse sensor.

A variety of preset workout programs is also offered.

Each program automatically controls the resistance of

the pedals as it guides you through an effective workout.

In addition, the console offers three pulse programs

that adjust the resistance of the pedals to keep your

heart rate near target levels during your workouts, and

aunique fitness test program that measures your VO2

max level. Note: The pulse programs and the fitness

test program require the use of a Polar®-compatible

chest pulse sensor (not included).

To use the QUICK START mode of the console,

follow the steps beginning on page 10. To use a

preset program,see pages 12 to 16. To use a pulse

program, see page 17. To use the fitness test pro-

gram, see page 19. To use the maintenance mode,

see page 20.

Main Display

Matrix

HOW TO USE THE BASIC CONSOLE

Note: If there is a

sheet of clear

plastic on the

console, remove

the clear plastic.

HOW TO USE THE QUICK START MODE

Plug in the power cord or begin pedaling to

activate the console.

Ifthe recumbent bike has a Basic console, it can

beused with or without the included power cord.

To use the power cord, see HOW TO CON-

NECT THE POWER CORD on page 7. To use

the recumbent bike without the power cord,

begin pedaling at a cadence of about 20 revolu-

tions per minute (RPM) or faster. After a moment,

the console displays will light and a series of

tones will sound. While you pedal, power will be

supplied by a generator; remember to continue

pedaling while using the recumbent bike.

If the recumbent bike has a Workout TV con-

sole, the power cord must be used for the TV

to be operated.

Select the QUICK START mode.

When the power is turned on, the QUICK START

mode will be selected. If you have already se-

lected a program, select the QUICK START mode

again by repeatedly pressing the PROGRAM

SELECT button until the words “QUICK START”

appear in the main display.

Afew seconds after the QUICK START mode is

selected, the words “QUICK START” will begin to

scroll across the main display.

Press the START button and begin pedaling.

When the button is pressed, the console will begin

displaying exercise data.

Change the resistance of the pedals as desired.

As you pedal, change

the resistance of the

pedals by pressing the

RESISTANCE + and –

buttons. To change the

resistance quickly,

press the QUICK RESISTANCE buttons. There

are twenty resistance levels, from level 0.5 to

level 10.

Follow your progress with the matrix and the

main display.

The matrix—When the QUICK START mode is

selected, the matrix will show a graph of the resis-

tance levels that you select. The flashing column

shows the current resistance level. Every thirty

seconds, all columns will move one position to the

left. As you increase or decrease the resistance,

additional indicators will light or darken in the

flashing column (and in all columns to the right).

Note: The matrix shows

relative

resistance levels.

As you increase or decrease the resistance, the lit

indicators in all columns may shift upward or

downward so that the highest indicators are al-

ways shown in the matrix.

The main display—The main display will show

the following information:

Resistance—The left

end of the main display

will show the resistance

level of the pedals.

Pace/Time—When the

Quick Start mode is se-

lected, this section of the

main display will show

your pedaling pace (in

minutes per mile

)and

the elapsed time. The display will change from one

number to the other every few seconds. Note: Any

time that the resistance level changes, the display

will show your pedaling pace.

Note: When a preset program or a pulse program

is selected, the display will show your pedaling

pace, the time remaining in the program, and the

time remaining in the current segment of the pro-

gram. During the fitness test program, the display

will show the elapsed time.

Flashing Column

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NordicTrack Heimtrainer Handbücher

NordicTrack

NordicTrack GX2 Sport NTEX03009.3 Bedienungsanleitung

NordicTrack

NordicTrack NTC05941 Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.2 Bike Kurzanleitung

NordicTrack

NordicTrack Commercial S22i Studio Cycle Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.4 Bike Bedienungsanleitung

NordicTrack

NordicTrack NTEX3196.3 Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.0 Gw Bike Bedienungsanleitung

NordicTrack

NordicTrack 831.21977.2 Bedienungsanleitung

NordicTrack

NordicTrack NTEX23012.1 Bedienungsanleitung

NordicTrack

NordicTrack GX2.0 Bedienungsanleitung

NordicTrack

NordicTrack NTEX05121-INT.1 Bedienungsanleitung

NordicTrack

NordicTrack NTEX14807.1 Bedienungsanleitung

NordicTrack

NordicTrack NTEX78214.0 Bedienungsanleitung

NordicTrack

NordicTrack SL 710 Bedienungsanleitung

NordicTrack

NordicTrack GX 2.5 NTEX23012.0 Bedienungsanleitung

NordicTrack

NordicTrack NTEVEX79913.0 Bedienungsanleitung

NordicTrack

NordicTrack SL 700 NTC59021 Bedienungsanleitung

NordicTrack

NordicTrack C3 Si Bike Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.0 Gw Bike Bedienungsanleitung

NordicTrack

NordicTrack Commercial S22i Studio Cycle Bedienungsanleitung

NordicTrack

NordicTrack Sl850 Bike Kurzanleitung

NordicTrack

NordicTrack Gx 3.4 Bike Kurzanleitung

NordicTrack

NordicTrack CEX32531 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung

KIDSFIT

KIDSFIT Cardio Kids 661 Bedienungsanleitung