Oneida Air Systems Dust Deputy AXD001004 Bedienungsanleitung

2_09

The Original

U.S. Patent # 7,282,074

E.U. Patent Pending

Plastic D-I-Y Dust Deputy Owner’s Manual

Oneida Air Systems, Inc. was founded in 1993 to bring cost effective, state-of-the-art dust collection sys-

tems and material handling ductwork to woodworking shops. OAS designs and manufactures industrial

grade dust collection systems that create a practical, safe and healthy work place environment.

Captures 99% of the dust before it reaches your shop

vacuum. No ﬁlter clogging and no loss of suction.

1.800.732.4065 www.oneida-air.com

AXD001004

This kit contains

only the plastic

Dust Deputy cyclone.

No other hardware

or accessories

are included.

ZBM000029

(24145)

RTD10000667AB

Thank You for Choosing an Oneida Air Systems Product!

OAS manufactures and sells dust collection equipment only. Our qualiﬁed technicians

and sales staff are available 7:30am - 6:00pm EST Mon. - Thurs. and 7:30am - 5:00pm

EST Fri. to answer any questions concerning OAS products and dust collection.

System Start-Up Information

Read the installation and maintenance instructions as well as the

recommended safety practices in this manual before assembling

and using the Dust Deputy.

Some dusts are highly ﬂammable or explosive. Learn / know

what you are dealing with. Follow all local, state, federal &

NFPA codes and guide lines.

Safety Instructions to be Strictly Followed.

Wood dust mixtures are highly ﬂammable and can be explosive.

NEVER introduce sparks or sources of ignition into collector.

1.) Use 10 gal. or smaller drum size.

2.) Dump drum after each use.

3.) Ground system. (See next page)

The Dust Deputy is made from static dissipating plastic. See grounding

instructions.

Keep ﬁre extinguishers handy at all times.

NEVER leave wood dust in a building or vehicle.

Do not vacuum, or use this Dust Deputy near ﬂammable or combus-

tible liquids, gases, or explosive dusts, such as gasoline or other fuels,

lighter ﬂuid, cleaners, oil-based paints, natural gas, hydrogen, coal dust,

magnesium dust, grain dust, aluminum dust, sugar dust, ﬂour dust or

gun powder.

Do not vacuum anything that is burning or smoking, such as cigarettes,

matches, or hot ashes.

To reduce the risk of health hazards from vapors or dusts, do not

vacuum toxic materials unless a HEPA ﬁlter is used. Do not use or store

near hazardous materials.

WARNING / SAFETY

Dust Deputy Owner’s Manual 2009

Hose to

Vacuum

Hose

Tools

These are the minimum parts you

will need to acquire to use the

Dust Deputy:

- 2” - 2 1/4” dia. Vacuum Hose to

go between the Dust Deputy outlet

and your Shop Vacuum.

- (6) 1/4” x 1” bolts with nuts and

washers.

- Any suitable sealant (e.g.- Sili-

cone) to use between the cyclone

base ﬂange and the top of your

dust container. Any air leak

between the cyclone and lid will

affect performance.

- Vacuum Hose to attach to Dust

Deputy inlet and your tools.

- Shop Vacuum

- Dust drum or container that will

withstand the vacuum pressure

(We recommend at least a 90 mil

side thickness otherwise the con-

tainer may collapse when in use.)

and has a lid that can be tightly

sealed. (e.g.- 5 gal. plastic drywall

bucket) Drum must be 100% air

tight. Any air leak in lid or drum will

affect performance.

For wood dust use a smaller

container (up to 10 gal.)

To reduce the chance of ﬁre

hazard, empty container after each

use.

Dust Deputy Owner’s Manual 2009

Make sure larger

diameter hoses are

pushed up so they ﬁt

tightly over the inlet

How to Make Template for Drum Lid and

Assemble Dust Deputy

8. Lid must completely seal to drum. Any air leaks will affect

performance.

9. Attach one hose from top cyclone outlet to shop vacuum and

the other hose from side cyclone inlet to your tools or use

hose by itself to pick up waste.

7. Put bolts through washer and cyclone base then fasten with

nuts under drum lid.

6. Spread even layer of sealant between center hole

and bolt holes on drum lid. (See above diagram.) You must

have a complete seal between cyclone and drum lid or

performance will be affected.

5. Use 5/16” drill bit to drill bolt holes.

4. Draw 3” dia. circle for drum inlet. Carefully cut out 3” hole in lid.

3. Connect opposite bolt holes with lines as shown above to

ﬁnd center.

2. With pen, trace around base and bolt holes.

1. Place cyclone base in center of drum lid.

Sealant

Troubleshooting

Dust Deputy not separating well. (Only a tiny amount of dust

should reach the vacuum.)

Low air volume.

Material swirls in cyclone and won’t drop down into drum.

Air leak. Check cyclone ﬂange / drum lid / barrel. Even

small leaks will affect performance.

Vacuum ﬁlter clogged. Blockage in hose.

Air leak in bottom of cyclone / drum lid or dust drum.

Large, bulkier material might swirl. Restart or temporarily

cut off air ﬂow to drop material down.

For optional grounding, attach wire to bolt between bolt head and

washer, then attach another washer to end of wire. Wire must be

long enough for washer to lie ﬂat on ﬂoor.

Bolt

Wire

Washer

Floor

Cyclone

Lid

Nut

(Ring Terminal Recommended)

Dust Deputy Owner’s Manual 2009

Adding Cyclones to Improve Performance

Attach in Series

Attach in Parallel

Increases particle

efﬁciency.

Top View

This arrangement may

be useful for very ﬁne

dust situations.

Top View

Same particle efﬁciency

but increases CFM.

100 CFM 100 CFM

200 CFM

Your arrangement is only limited

by your imagination!

Dust Deputy Owner’s Manual 2009

Oneida Air Systems, Inc. 2009

Oneida Air Systems, Inc. 1001 West Fayette St., Syracuse, NY 13204

Ph. - 1.800.732.4065 or 315.476.5151 / Fax: 315.476.5044

Fire Hazards and Codes

Warning! Explosion and ﬁre hazard! Never vacuum ﬂammable ﬂuids or gas, oil, alcohol, solvents, etc. Do not

operate near ﬂammable ﬂuids or gas. Never vacuum warm ﬂuids or materials at more than 140 deg. F (60 deg.

C), such as burning cigarettes, ashes, glowing coals, etc.

Warning! Do not vacuum hazardous / carcinogenic dust unless a HEPA ﬁlter is installed.

Always keep ﬁlter cartridge clean so the vacuum operates properly.

Empty Dust Deputy waste can frequently. Never leave ﬂammable material in your Dust Deputy or shop vacuum.

Returned Goods Policy

Buyer must inform O.A.S. of any shortage or damage, by so noting in writing, on the freight delivery bill prior

to signing to indicate receipt of shipment. All claims, including claims covered under the limited warranty, are

subject to inspection and investigation by O.A.S. O.A.S. reserves the right to inspect, investigate all returned

products before Buyer’s claim is settled. All products returned for a cash refund must be unused, resaleable

and purchased within 30 days. There are no refunds on ﬂex hose, custom made components or partial kit

items. Kits must be returned in full (all components) for credit. There will be a 25% restocking fee applied to

any returned items. Buyer must call and get an RMA (Return Authorization Number). Merchandise must

be shipped to us prepaid.

Limited Warranty

Oneida Air Systems warrants products it manufactures for a period of 90 days to the original purchaser from

the date of purchase. Items not manufactured by O.A.S. are limited to their own manufacturer’s warranties.

This warranty does not apply to defects directly or indirectly to misuse, negligence, accidents, abuse, repairs,

or alterations or lack of maintenance. This is Oneida Air Systems sole written warranty and any warranties that

may be implied by law, including any merchantability or ﬁtness, for any particular purpose, are hereby limited to

the duration of this written warranty. O.A.S. does not warrant or represent that the merchandise complies with

the provisions of any law or acts unless the manufacturer so warrants. In no event shall O.A.S.’s liability under

this warranty exceed the purchase price paid for the product and any legal actions brought against Oneida Air

Systems shall be tried in the State of New York, County of Onondaga.

Oneida Air Systems shall in no event be liable for death, injuries to persons or property or for incidental, contin-

gent, special, or consequential damages arising from the use of our product.

Oneida Air Systems does not warrant or authorize use of wood dust collectors for other purposes. This includes

wood products that are treated, coated, or otherwise altered from their natural state.

Terms & Conditions

Andere Handbücher für Dust Deputy AXD001004

Inhaltsverzeichnis

Andere Oneida Air Systems Staubabscheider Handbücher

Oneida Air Systems

Oneida Air Systems Supercell XSK000035 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Cobra Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems XXK050100 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems XCKM013000 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Super Dust Gorilla 2hp Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems 5HP High Pressure Dust Collector Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Super Dust Gorilla Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Super Dust Gorilla 2hp Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Gorilla Portable XXP990201H Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems 10 HP Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Cobra - XCK010000 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems V-1500 1.5hp Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Smart Pro XXS200001 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Pro 1500 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems XGK030035 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Super Dust Gorilla Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Deluxe Dust Deputy Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Super Dust Gorilla Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Gorilla Pro Smart Boost... Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems 2 HP Commercial Cyclonic Dust Collector Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Supercell Mobile Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Supercell Mobile Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Pro 2000 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems BenchTop DC Bedienungsanleitung

Beliebte Staubabscheider Handbücher anderer Marken

Fein

Fein 9-88-35 Bedienungsanleitung

Blastrac

Blastrac BDC-44 Bedienungsanleitung

DIVERSITECH

DIVERSITECH WB-4000-D Handbuch

National

National 3402 Bedienungsanleitung

Grizzly

Grizzly G0850 Bedienungsanleitung

Bosch

Bosch GDE18V-16 Montageanleitung

Grizzly

Grizzly G0441HEP Bedienungsanleitung

Storch

Storch Cover Quick Wall Bedienungsanleitung

laguna

laguna C FLUX 1 Bedienungsanleitung

GMC

GMC RDC8LA Bedienungsanleitung

Jet

Jet DC-1100VX Series Service-Handbuch

Showa

Showa Fumeresa CBA-1000AT-HC-DSA-V1 Bedienungsanleitung

King Industrial

King Industrial KC-4043KWRC Bedienungsanleitung

Jet

Jet 500 Bedienungsanleitung

Shop fox

Shop fox SHOP FOX W1687 Bedienungsanleitung

Blastrac

Blastrac 655DC Bedienungsanleitung

Elektra Beckum

Elektra Beckum Multi 180A Bedienungsanleitung

Grizzly

Grizzly G0508 Kurzanleitung