Prince Castle UHC6PT-22MCD Bedienungsanleitung

Universal Holding Cabinet

UHC6PT-22MCD

Operation

Manual

Product Identification

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

ON/OFF

Switch

Item Timer

Button

Item

Display

Slot

Row Mode

Button

Master

Control

Left

Button

Master

Display

Master

Keypad

Master

Timer

Button

Master

Temperature

Button

Right

Button

OK Select

Button

Back

Button

Program

Button

LIMITED WARRANTY

This product is warranted to be free from defects in material and/

or workmanship for a period of three (3) years from date of

original installation, not to exceed 42 months from date of

shipment from our factory. Any part or component which proves

to be faulty in material and/or workmanship within the warranty

period will be replaced or repaired (at the option of Prince Castle,

Inc.) without cost to the customer for parts or labor.

This warranty is subject to the following exceptions/conditions:

• Use of any non-genuine Prince Castle parts voids this

warranty and all work must be performed by an authorized

Prince Castle Service Agent.

• All labor shall be performed during regular work hours.

Overtime premium will not be covered.

• Travel charges are limited to 100 miles (200 kilometers) round

trip, 2 hours travel time, one trip per repair.

• Damage caused by carelessness, neglect, and/or abuse (e.g.,

using wrong current, dropping, tampering with or altering

electrical components, or improper cleaning) is not covered.

• Equipment damaged in shipment, by fire, flood or an act of

God is not covered.

• Damage to coated surfaces is not covered by this warranty.

TABLE OF CONTENTS

Product Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Operation – Item Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Operation – Mode Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Management Programming . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Factory Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Daily Planned Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Weekly Heater Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

STL

LLC

WORLDWIDE

355 East Kehoe Blvd. • Carol Stream, IL 60188 USA

Telephone: 630-462-8800 • Toll Free: 1-800-PCASTLE

Fax: 630-462-1460 • www.princecastle.com

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Safety Information

Indicates information important to the proper operation of

the unit. Failure to observe may result in damage to the

equipment and/or severe bodily injury or death.

Indicates information important to the operation of the unit.

Failure to observe may result in damage to the equipment.

WARNING

CAUTION

Important

Prince Castle reserves the right to change specifications

and product design without notice. Such revisions do not

entitle the buyer to corresponding changes, improvements,

additions or replacements for previously purchased

equipment.

Electrical Specifications

208-240V 50/60 Hz 2250-3450W

Installation

Unpack and inspect. Remove the unit from the

carton and inspect for signs of damage. If there is

damage to the unit:

• Notify the carrier within 24 hours of delivery.

• Save carton and packaging materials for inspection

purposes.

• Contact your local dealer, or if purchased directly,

the Prince Castle Sales Department at

1-800-722-7853 or 630-462-8800 to arrange for a

replacement unit.

Place Universal Holding Cabinet (UHC) on flat

surface. Remove blue and/or white protective

covering.

NOTE: When installing this unit, the ambient

temperature at the mounting site should not exceed

100°F (38°C).

Plug unit in. Plug

unit into a grounded

receptacle with a

matching plug

configuration.

All electrical connections must be in accordance

with local electrical codes and any other

applicable codes.

If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent, or similarly

qualified persons in order to avoid a hazard.

To prevent an electric shock hazard this device

must be bonded to equipment in close proximity

with an equipotential bonding conductor. This

device is equipped with a grounding lug for this

purpose and is marked with the following symbol.

WARNING

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Operation – Item Timers

This appliance is not intended for use by persons

(including children) with reduced physical, sensory, or

mental capabilities, or lack of experience and knowledge

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

WARNING

Turn unit ON. Turn

the ON/OFF switch

located on the upper

left of the UHC to the

ON position.

Set each active

row to the correct

mode. For each row

of slots that will be

used, press its Row

Mode button until

the correct mode

appears in that

row’s Item Displays

(for example,

BRKFST). Then

press the OK Select

button.

NOTE: If the entire

UHC will be used in

one mode and you

have a password,

you may set the

entire UHC at once.

Press the Master Program button, enter your

password and press the OK Select button. Then press

the button to the left of the word “MODES”, then the lit

Item Timer to the left of the desired mode, and then

the OK Select button. CHG COMPLETE will appear in

the Master Display. Press the Back button three times

to return to normal operation. See “Changing Between

Menu Modes”.

brkfst

ABC

JKLGHI

TUVPQRS

brkfst

Set each inactive

row to OFF. For each

row of slots that will

not be used, press its

Row Mode button

until OFF appears in

that row’s Item

Displays. Then press

the OK Select button.

This will keep unused

rows of slots from

heating up and save

energy.

off

ABC

JKLGHI

TUVPQRS

brkfst

Allow the rows to

heat up. Each row’s

Item Displays will

read LOW TEMP until

that row is ready for

use. Depending on

settings, warm-up can

take up to 35 minutes.

low temp

Load a UHC slot

with prepared food.

Place a tray of

cooked product into a

slot with that food’s

name in its Item

Display. Make sure

the slot line on the

tray handle lines up

with the edge of the

slot.

Discard cracked or damaged trays.

can bacn

CAUTION

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Operation – Item Timers (continued)

Press the slot’s Item

Timer button.

Pressing the slot’s

Item Timer button

once will illuminate

the pressed button

and start the product’s holding timer. The associated

display will also get brighter. After a short delay the

hold time will disappear and the timer will begin to

count down. If the button is pressed again while the

time is still displayed the hold time is reduced in 5

minute increments for every button press.

NOTE: Pressing the slot’s Item Timer button again

after pausing will cancel timing.

A. To view the time

left for a tray,

press the Master

Timer button.

B. To remove

portions from the

tray, slide the tray

only as far as

needed, then

quickly return the

tray to the slot

line.

C. When the first

alarm sounds, the

Item Timer button

begins to flash

and the Item

Display flashes

COOK NOW,

indicating it is time

to cook more food.

D. When the final

115

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

1515

cook now

xxxxxxxx

Load and time all of the active slots. Continue

loading and timing the requested product (see steps 5

and 6).

NOTE: When more than one slot holds trays of the

same item, the Item Timer button for each of these

pans will be illuminated and the display associated

with the pan that contains the product that should be

used first will be bright. The displays for the other pans

with this same product will be dim.

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Operation – Mode Select

CHANGING BETWEEN MENU MODES

You can choose between the following modes: Breakfast,

Change Over, Regular Menu, Custom 1, Custom 2, Clean and

OFF. The operating mode can be changed two different ways,

on a row-by-row basis or all rows at one time.

One row at a time:

For each row of

slots that will be

changed, press its

Row Mode button

until the correct

mode appears in

that row’s Item

Displays (for

example, BRKFST).

Then press the OK

Select button on the

Master Control

Panel.

brkfst

ABC

JKLGHI

TUVPQRS

brkfst

Entire UHC at

once (requires

password): Change

the entire unit by

pressing the Master

Program button,

entering your

password and

pressing the OK

Select button.

Then press the lit

Item Timer to the left

of “MODES”, then the

lit Item Timer to the

left of the desired

mode, and then the

OK Select button.

CHG COMPLETE

will appear in the

Master Display.

Press the Back

button three times to

return to normal

operation.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

program

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

program

modes

menus

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

program

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

CHG COMPLETE

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Management Programming

Press the Master Program button. The Master

Display will request your password.

Enter your password. Type your password in on the

keypad and press the OK Select button.

Programmable categories will appear in the rows of

Item Displays, reading from the left.

Choose a

programmable

category. Press the

lit Item Timer button

to the left of the

category you wish to

program. Follow the

instructions on the

Master Display to

navigate and

program the UHC.

Confirm selections by

pressing the OK

Select button.

Press the Back

button to retreat one

level of programming

(press several times

to exit programming).

modes

menus

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

program

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

CHG COMPLETE

The first

programmable

category is MODES.

Sets the entire UHC

to one of the different

daypart modes,

Breakfast, Change

Over, Regular,

Custom 1, Custom 2,

or Cleaning. Each of

the dayparts modes is

displayed. Press the

button next to the

desired daypart mode

and then press the

OK Select button on

the Master Control

Panel. Press the Back

button on the Master

Control Panel twice to

exit programming.

brkfst

CHG OVER

REG MENU

CUSTOM 1

CUSTOM 2

The second

programmable

category is MENUS.

Sets which food

product is assigned to

each tray in each of

the daypart modes.

Press the button next

to the daypart mode

whose menu is to

change. The name of

the food product

currently assigned to

each tray position is

displayed. Pressing

the button next to the

desired tray position

cycles through the

available food

products that can be

assigned to the tray

position. When the

desired food product

is displayed, press

the OK Select button

on the Master Control

Panel. You can

change more than

one item before

confirming by

pressing OK Select.

NOTE: Be sure to

start with the left-most

Item Display in each

row, because

changing an item may

also make changes to

items to the right in

that row due to

temperature

restrictions.

brkfst

CHG OVER

REG MENU

CUSTOM 1

CUSTOM 2

bagel

fold egg

griddles

rnd egg

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Management Programming (continued)

The third

programmable

category is ITEMS.

Press the button next

to the task to be

performed, add a food

product, change a

product’s parameters,

or delete a food

product from the UHC’s

product library. You can

set the item’s Name,

Top Temperature,

Bottom Temperature,

Hold Time and Cook-

Now Time.

add item

CHG item

del item

The fourth programmable category is LOCALE.

Choose the language for the displays and whether

temperatures are reported in Fahrenheit or Celcius.

Press the button next to LANGUAGE and a list of

available languages appears. Press the button next to

the desired language and then the OK Select button.

Press the Back button twice to exit language selection

or additional times to exit programming.

Press the button next to DEGREES to select between

Celcius and Fahrenheit. Press the button next to the

desired temperature units and then the OK Select

button. Press the Back button twice to exit language

selection or additional times to exit programming.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

englishlanguage

fahrenhtdegrees

locale

The last

programmable

category is SOUND.

Choose how loud the

alarms are. There are

four sound levels plus

silent. Press the

button next to the

desired sound level

and the OK Select

button. Press the

Back button three

times to exit

programming.

curre

level 1

level 2

level 3

level 4

silent

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Factory Presets

Item Display Temperature

Setpoint

(Top/Bottom)

Hold

Time

(Min.)

Cook

Time

(Min.)

Bagels BAGELS

Breakfast

Chicken

BFST CKN

Biscuits BISCUITS 175°F (79°C)/

175°F (79°C)

Burritos BURRITO 175°F (79°C)/

175°F (79°C)

Canadian

Bacon

CAN BACN 175°F (79°C)/

175°F (79°C)

Crispy

Chicken

CRISPY

Filet-O-Fish FILET 200°F (93°C)/

200°F (93°C)

Folded Eggs FOLD EGG 175°F (79°C)/

175°F (79°C)

Griddles GRIDDLES

Grilled

Chicken

GRIL CKN 185°F (85°C)/

185°F (85°C)

Ham HAM

Hotcakes HOTCAKES

McChicken

Patties

MCCHIKEN 200°F (93°C)/

200°F (93°C)

McRib MCRIB

English

Muffins

MUFFINS 175°F (79°C)/

175°F (79°C)

None NONE — — —

McNuggets NUGGETS

Round Egg RND EGG 175°F (79°C)/

175°F (79°C)

Sausage SAUSAGE 175°F (79°C)/

175°F (79°C)

Scrambled

Eggs

SCRAMBLE 175°F (79°C)/

175°F (79°C)

Selects SELECTS

Skillet

Burger

SKLT BUR

Spicy

Chicken

SPCY CKN

Breakfast

Steak

STEAK

Regular

Patties

10-1 185°F (85°C)/

185°F (85°C)

Third

Pounder

3-1 185°F (85°C)/

185°F (85°C)

Quarter

Pounder

4-1 185°F (85°C)/

185°F (85°C)

SETTING THE UHC TO

FACTORY DEFAULT SETTINGS

If necessary, the UHC can be set to its original factory settings.

Press the Master

Program button and

enter 3550 on the

Keypad. The

maintenance menu

will appear and the

Master Display will

read TEST MODE.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

test mode

press

Press the Right

button repeatedly.

Press the Right

button on the Master

Display until CHG

SETTINGS appears

on the Master

Display.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

chg settings

press

Press the OK Select

button.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

chg settings

press

Press the Left

button repeatedly.

Press the Left button

on the Master Display

until USE SYS DEFS

appears on the

Master Display.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

use sys defs

press

Press the OK Select

button. SAVING

DONE will appear in

the Master Display.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

saving done

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Factory Presets (continued)

Turn the UHC OFF.

Using the ON/OFF

switch, turn the

UHC OFF and wait

10 seconds.

Turn the UHC ON.

Using the ON/OFF

switch, turn the UHC

ON. The UHC will

now be set to factory

default settings.

Daily Planned Maintenance

Place the unit in the

Cleaning mode. For

each row of slots,

press its Row Mode

button until CLEAN

appears in that row’s

Item Displays. Then

press the OK Select

button.

NOTE: The row

cannot be switched to

clean mode if any of

the timers in that row

are active.

Do not use McD Sink Sanitizer (HCS) to clean the

exterior of the UHC.

ABC

JKLGHI

TUVPQRS

brkfst

clean

CAUTION

Let the unit cool.

Use a cabinet brush to clean the slot surface.

Remove any remaining buildup on the surface.

DO NOT use any tool other than the cabinet cleaning

brush to clean the cabinet slots. Wire brushes,

abrasive pads, or metal scrapers will permanently

damage the surface of the cabinet slot.

DO NOT use any other cleaner than McD APC (All

Purpose Concentrate) (HCS). Using other compounds

may result in damage to control components.

Do not hose down or use a water jet on the unit. Keep

the unit away from running water.

CAUTION

Remove all loose particles. Push the debris out the

opposite end of the cabinet with the cabinet brush.

Clean each slot.

Use a damp, clean/

sanitized towel and

the cleaning brush.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

Wipe the exterior.

Clean all exterior

surfaces with a

clean, sanitized

towel that has been

dampened with McD

APC (HCS).

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

Turn the unit OFF.

Universal Holding Cabinet

UHC6PT-22MCD

STL

LLC

WORLDWIDE

Weekly Heater Check

Ensure the slots are clean. Remove all signs of

cooking oil and food particles.

Select low temperature for one slot. Choose a

mode in which the item in that slot has a temperature

setpoint of 175°F (79°C). Or program an item to

achieve a temperature setpoint of 175°F (79°C) (see

Management Programming). Wait until the Item

Display no longer reads LOW TEMP.

filetfiletfilet

Take a top heater

temperature

reading. Using a

stand-alone

temperature meter

(not supplied), take a

temperature reading

within 1 inch

(2.54 cm) of the

center of the top

heater plate for the

slot. Temperature

should be within 5°F

(3°C) of 175°F (79°C).

Hot surfaces. Use caution when taking temperature

readings within the shelf.

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

WARNING

Take a bottom

heater temperature

reading. Using the

stand-alone

temperature meter,

take a temperature

reading within 1 inch

(2.54 cm) of the

center of the bottom

heater plate for the

slot. Temperature

should be within 5°F

(3°C) of 175°F

(79°C).

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

Repeat test for each slot.

Select high temperature for one slot. Choose a

mode in which the item in that slot has a temperature

setpoint of 200°F (93°C). Or program an item to

achieve a temperature setpoint of 200°F (93°C) (see

Management Programming). Wait until the Item

Display no longer reads LOW TEMP.

fold eggfold eggfold egg

Take a top heater

temperature reading.

Using the stand-alone

temperature meter,

take a temperature

reading within 1 inch

(2.54 cm) of the

center of the top

heater plate for the

slot. Temperature

should be within 5°F

(3°C) of 200°F

(93°C).

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

Take a bottom

heater temperature

reading. Using the

stand-alone

temperature meter,

take a temperature

reading within 1 inch

(2.54 cm) of the

center of the bottom

heater plate for the

slot. Temperature

should be within 5°F

(3°C) of 200°F

(93°C).

213

ABC DEF

2430

JKLGHI MNO

879

TUVPQRS WXYZ

Turn the unit OFF.

Andere Prince Castle Gewerbliche Lebensmittelgeräte Handbücher

Prince Castle

Prince Castle CBT-SB-NA-1PS Bedienungsanleitung

Prince Castle

Prince Castle TX Series Bedienungsanleitung

Prince Castle

Prince Castle Universal JIB Series Bedienungsanleitung

Prince Castle

Prince Castle DCFT-BKNA Bedienungsanleitung

Prince Castle

Prince Castle EHB34-CE Series Bedienungsanleitung

Prince Castle

Prince Castle DHB-BK Series Bedienungsanleitung

Prince Castle

Prince Castle EHB Series Bedienungsanleitung

Prince Castle

Prince Castle EHB34-2 Series Bedienungsanleitung

Prince Castle

Prince Castle DHB2PT-CK Series Bedienungsanleitung

Prince Castle

Prince Castle EHB34-2 Series Bedienungsanleitung

Prince Castle

Prince Castle DHB2PT-44D Bedienungsanleitung

Prince Castle

Prince Castle EHB22 Series Bedienungsanleitung

Prince Castle

Prince Castle Burger King DHB-BK41 Bedienungsanleitung

Prince Castle

Prince Castle DHB-P1A Series Bedienungsanleitung

Prince Castle

Prince Castle Popeyes DHB3PT-44D Bedienungsanleitung

Prince Castle

Prince Castle EHB-CE Series Bedienungsanleitung

Prince Castle

Prince Castle EHBTH34-1 Series Bedienungsanleitung

Prince Castle

Prince Castle UHC Series Bedienungsanleitung

Prince Castle

Prince Castle DHB4SS-20 Series Bedienungsanleitung

Prince Castle

Prince Castle EHB Series Bedienungsanleitung

Prince Castle

Prince Castle Potato Witch 913 Bedienungsanleitung

Prince Castle

Prince Castle DHB-KFC3GB Bedienungsanleitung

Prince Castle

Prince Castle DHB3PT-KFCCN Bedienungsanleitung

Prince Castle

Prince Castle CTS Bedienungsanleitung

Beliebte Gewerbliche Lebensmittelgeräte Handbücher anderer Marken

Blue Seal

Blue Seal EF30 Bedienungsanleitung

Tecfrigo

Tecfrigo Snelle 400 GS Bedienungsanleitung

Follett

Follett PFT Series Bedienungsanleitung

MEFE

MEFE CAT 206 PTR Leitfaden

Premier

Premier 900cl Bedienungsanleitung

Diamond

Diamond AL1TB/H2-R2 Bedienungsanleitung

Salva

Salva IVERPAN FC-18 Bedienungsanleitung

Hussmann

Hussmann Rear Roll-in Dairy Bedienungsanleitung

Cornelius

Cornelius IDC PRO 255 Bedienungsanleitung

Moduline

Moduline HSH E Series Bedienungsanleitung

MINERVA OMEGA

MINERVA OMEGA DERBY 270 Bedienungsanleitung

Cambro

Cambro IBSD37 Bedienungsanleitung

Fri-Jado

Fri-Jado LDR 8 s Bedienungsanleitung

Diamond

Diamond OPTIMA 700 Kurzanleitung

Allure

Allure Melanger JR6t Bedienungsanleitung

saro

saro FKT 935 Bedienungsanleitung

MKN

MKN OPGGSGARG Series Bedienungsanleitung

BIRO

BIRO 22 Service-Handbuch