ResMed S9 Oximeter Adapter Bedienungsanleitung

Global leaders in sleep and respiratory medicine www.resmed.com

User Guide

S9™Oximeter Adapter

Data transfer accessory

English • Deutsch • Français • Italiano • Español • Português • Nederlands •

Svenska • Dansk • Norsk • Suomi • 简体中文 • 繁體中文

2 431

53 2 4

23 2 41

English

Thank you for choosing the ResMed S9 Oximeter adapter. The S9 Oximeter adapter

connects a NONIN Xpod™oximeter to your S9 device. Oximetry data (oxygen

saturation and pulse rate) is recorded on the SD card inserted into the S9 device.

Please read the entire guide before using this device.

S9 Oximeter adapter

Refer to illustration A.

1. Release button

2. Oximeter port

3. Adapter connector

4. Adapter clip

Rear panel of S9 device

Refer to illustration B.

1. DC power inlet

2. Adapter clip socket

3. Module/Adapter port

4. SD card slot

5. Alarm (Bilevel alarmed devices only)

Associated accessories

•Xpod oximeter

•Xpod fixation clip

•Finger pulse sensor

•S9 Oximetry accessories pack (including Xpod oximeter, Xpod fixation clip and

3m Oximeter soft sensor reusable).

Setup

Before setting up, disconnect the S9 device from the power outlet.

Refer to illustrations C and D.

1. Ensure an SD card is inserted into the SD card slot on the S9 device.

2. Align the S9 Oximeter adapter clips with their corresponding sockets and push

the adapter onto the S9 device. Ensure the adapter clips click into place.

English

3. Connect the Xpod oximeter to the oximeter port on the S9 Oximeter adapter.

4. Connect the the Xpod oximeter to the finger pulse sensor.

5. Reconnect the S9 device to the power outlet. The S9 device briefly displays

Oximeter enabled.

You are now ready to start therapy. For further information, please refer to your

S9Welcome Guide.

Removing and returning the S9 Oximeter adapter and SD card

1. Disconnect the S9 device from the power outlet.

2. Press and hold in the release buttons located on each side of the S9 Oximeter

adapter while removing it from the S9 device.

3. Remove the Xpod oximeter from the oximeter port on your S9 Oximeter

adapter.

4. Remove the finger sensor cable from the Xpod oximeter.

5. Remove the SD card from the S9 device. For instructions on removing the

SD card, please refer to the S9 SD card protective folder provided with the

S9device.

6. When instructed to do so, return this User Guide, the S9 Oximeter adapter and

the SD card to your healthcare professional in the original packaging.

Note: Ensure that you remove the S9 Oximeter adapter from the S9 device before

removing the Xpod oximeter. Failure to do so may damage the S9Oximeter adapter.

Cleaning and maintenance

If necessary, wipe the outside of the S9 Oximeter adapter with a clean, dry cloth.

For instructions on how to clean the oximeter and its sensor, please refer to the

user guide supplied with these accessories.

English

Save the packaging

Please keep this user guide and all the original packaging for the S9 Oximeter

adapter.

Troubleshooting

If there is a problem, try the following suggestions. If the problem cannot be solved,

contact your healthcare professional.

Problem/possible cause Solution

S9 device displays: Insert SD Card or press dial to accept no oximetry data

logging

The S9 device cannot detect an SD

card and no oximetry data can be

logged or stored.

Ensure that an SD card is correctly inserted in

the SD card slot of your S9 device.

S9 device displays: Check oxi sensor or press dial to accept no oximetry data

logging

The ﬁnger pulse sensor is not

attached to the ﬁnger or the sensor

cable is not connected to the Xpod

oximeter at the commencement

of therapy.

Disconnect and reconnect the Xpod oximeter

connector and sensor cable according to the

instructions supplied with these accessories.

S9 device displays: Connect oxi sensor or press dial to accept no oximetry

data logging

The S9 Oximeter adapter is not

connected properly or data is not

transmitting correctly.

Remove your S9 Oximeter adapter from

the S9 device according to the instructions.

Reattach your S9 Oximeter adapter and

reconnect your S9 device to the power outlet.

English

Technical speciﬁcations

Operating temperature +41°F to +95°F (+5°C to +35°C)

Operating humidity 10 to 95% non-condensing

Storage and transport temperature -4°F to +140°F (-20°C to +60°C)

Storage and transport humidity 10 to 95% non-condensing

Gross dimensions (L x W x H) 1.74” x 2.12” x 0.91”

(44.35 mm x 54.10 mm x 23.30 mm)

Weight 0.77 oz (22.1 g)

Electromagnetic compatibility Please refer to the S9 Information Guide for

details

Note: The manufacturer reserves the right to change these specifications without

notice.

Symbols

The following symbols may appear on the S9 Oximeter adapter or packaging:

Caution; Read instructions before use;

IP21

Protection against insertion of

fingers and against vertically dripping water; Manufacturer;

LOT

Batch Code;

European Authorised Representative; European RoHS; Catalogue

number; Serial number; Canadian Standards Association; UL Listed.

Environmental information

WEEE 2002/96/EC is a European Directive that requires the proper disposal

of electrical and electronic equipment. These devices should be disposed of

separately, not as unsorted municipal waste.To dispose of the device, you should

English

use appropriate collection, reuse and recycling systems available in your region.

The use of these collection, reuse and recycling systems is designed to reduce

pressure on natural resources and prevent hazardous substances from damaging

the environment.

If you need information on these disposal systems, please contact your

local waste administration.The crossed-bin symbol invites you to use these

disposal systems. If you require information on collection and disposal of your

ResMed device, please contact your ResMed office, local distributor or go to

www.resmed.com/environment.

WARNING

•The S9 device should be disconnected from the power outlet when attaching or

detaching the S9 Oximeter adapter.

•Beware of electrocution. Do not immerse the device or power cord in water.

•Always disconnect the device from the power supply before cleaning and make

sure it is dry before plugging it back in.

CAUTION

•In the US, Federal law restricts this device to sale by or on the order of a

physician.

•Only use the S9 Oximeter adapter as specified in this guide.

•Avoid exposing your S9 Oximeter adapter to moisture or extreme temperatures.

•Do not use liquids to clean any part of the S9 Oximeter adapter.

•Do not open your S9 Oximeter adapter.There are no user serviceable parts

inside. Repairs and internal servicing should only be performed by an authorized

service agent.

Limited warranty

Please refer to the ResMed S9 Information Guide.

Deutsch

Vielen Dank, dass Sie sich für einen S9 Oximetrie-Adapter von ResMed entschieden

haben. Mit dem S9Oximetrie-Adapter wird ein NONIN Xpod™Oximeter an Ihr

S9Atemtherapiegerät angeschlossen. Auf der in das S9 Atemtherapiegerät

eingeführten SD-Karte werden Oximetriedaten (Sauerstoffsättigung und

Pulsfrequenz) aufgezeichnet.

Lesen Sie bitte vor dem Gebrauch des Adapters die gesamte Gebrauchsanweisung

aufmerksam durch.

S9 Oximetrie-Adapter

Siehe Abbildung A.

1. Entriegelungsknopf

2. Oximeteranschluss

3. Adapteranschluss

4. Adapter-Clip

Rückseite des

S9Atemtherapiegerätes

Siehe Abbildung B.

1. Gleichstromanschlussbuchse

2. Adapter-Clip-Buchse

3. Modul/Adapteranschluss

4. SD Datenkartenschlitz

5. Alarm (nur Bilevel-Geräte mit Alarm)

Zubehör

•Xpod Oximeter

•Xpod Befestigungs-Clip

•Fingersensor

•S9 Oximetrie-Zubehörpaket (einschließlich Xpod Oximeter, Xpod Befestigungs-

Clip und Weicher Sensor für Oximeter (Länge 3 m), wiederverwendbar).

Deutsch

Setup

Ziehen Sie vor dem Aufbau den Stecker des S9 Atemtherapiegerätes aus der

Steckdose.

Siehe Abbildungen C und D.

1. Stellen Sie sicher, dass eine SD-Karte in den SD-Kartenschlitz Ihres

S9Atemtherapiegerätes eingesteckt ist.

2. Richten Sie dieS9 Oximetrie-Adapter-Clips mit den entsprechenden Buchsen

aus und drücken Sie den Adapter auf das S9Atemtherapiegerät. Stellen Sie

sicher, dass die Adapter-Clips einrasten.

3. Schließen Sie das Xpod Oximeter an den Oximeteranschluss am S9Oximetrie-

Adapter an.

4. Schließen Sie das Xpod Oximeter an den Fingersensor an.

5. Schließen Sie das S9 Atemtherapiegerät wieder an die Steckdose an. Das S9

Atemtherapiegerät zeigt kurz Folgendes an: Oximeter aktiviert.

Sie können nun mit derTherapie beginnen. Weitere Informationen finden Sie in der

Einführung des S9Atemtherapiegerätes.

Entfernen und Zurückschicken des S9Oximetrie-Adapters und der

SD-Karte

1. Ziehen Sie den Stecker des S9 Atemtherapiegerätes aus der Steckdose.

2. Drücken und halten Sie die Entriegelungsknöpfe, die sich auf beiden Seiten

des S9Oximetrie-Adapters befinden, während Sie den Adapter vom

S9Atemtherapiegerät abnehmen.

3. Nehmen Sie den Xpod vom Oximeteranschluss Ihres S9Oximetrie-Adapters ab.

4. Nehmen Sie das Fingersensorkabel vom Xpod Oximeter ab.

5. Entfernen Sie die SD-Karte aus dem S9Atemtherapiegerät. Anweisungen zum

Entfernen der SD-Karte finden Sie auf dem mit Ihrem S9Atemtherapiegerät

mitgelieferten Schutzumschlag der S9SD-Karte.

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed Astral Bedienungsanleitung

ResMed

ResMed Swift FX Nano Bedienungsanleitung

ResMed

ResMed Mirage Vista Bedienungsanleitung

ResMed

ResMed ResLink Bedienungsanleitung

ResMed

ResMed Astral Bedienungsanleitung

ResMed

ResMed VS III Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed Pixi Bedienungsanleitung

ResMed

ResMed Quattro FX Bedienungsanleitung

ResMed

ResMed ClimateLineAir Oxy Bedienungsanleitung

ResMed

ResMed S8 Series Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Leitfaden

ResMed

ResMed 24977 Bedienungsanleitung

ResMed

ResMed ResScan Bedienungsanleitung

ResMed

ResMed Nox A1 Betriebsanleitung

ResMed

ResMed VPAP ST Technisches Handbuch

ResMed

ResMed S9 Escape Technisches Handbuch

ResMed

ResMed HumidAire 3i Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed Stellar 150 Bedienungsanleitung

ResMed

ResMed AirStart 10 APAP Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung