Rockwell Automation Allen-Bradley Guard master Safezone 3... Bedienungsanleitung

Installation Instructions

Original Instructions

SafeZone 3 Optics Cover

Catalog Numbers 442L-SZNMZCP, 442L-ASZNCPW

Safety Replace the Optics Cover

1. Confirm that the environment is clean and clear of fog, moisture, and dust.

2. First, clean the safety laser scanner from the outside, so that no foreign

bodies penetrate into the open device.

3. Unscrew the mounting screws (1 in Figure 1) for the optics cover.

4. Slowly and carefully detach the optics cover from the safety laser scanner.

If the optics cover seal sticks to the safety laser scanner, carefully detach

the optics cover using a screwdriver.

5. If necessary, remove contamination from the sealing groove and the

bearing surface of the safety laser scanner. Use residue-free plastic

cleaners.

6. Check whether the mirror on the motor is dirty and, if necessary, remove

dirt with an optic brush.

7. Set 1.0 N•m (8.85 lb•in.) tightening torque on the torque wrench.

8. During the following steps, wear the gloves that are supplied with the new

optics cover.

9. Take the new optics cover out of the packaging and remove the protective

cap of the seal.

10. Remove any remaining packaging, if necessary.

11. Carefully push the optics cover over the mirror. Make sure that the optics

cover does not touch the mirror.

12. Place the optics cover onto the safety laser scanner. Make sure that the

optics cover rests over the whole area without any gaps.

13. Screw in the new mounting screws (1 in Figure 1).

14. Tighten the screws with the set tightening torque of 1.0 N•m (8.85 lb•in.)

15. Verify that the optics cover is clear of dirt and damage.

16. Recommission the safety laser scanner, see publication 442L-UM008.

WARNING: Risk of ineffectiveness of the protective device.

Failure to observe these instructions can result in failure of

the protective device: persons or parts of the body to be

protected cannot be detected. During operation, the safety

laser scanner constantly measures the degree of

contamination of the optics cover. For a new optics cover to

function perfectly, an optics cover calibration has to be

implemented initially. This optic cover serves as a reference

for contamination measurement (status = uncontaminated).

• Conduct an optics cover calibration with the 442L Add-on

Profile (AOP) configuration software every time the cover of the

SafeZone™ 3 safety laser scanner is replaced.

• Conduct the optics cover calibration at room temperature

(10…30 °C [50…86 °F]).

• Only conduct the optics cover calibration with a new optics

cover.

• Make sure that the entire system is clear of contamination

when the calibration is conducted.

IMPORTANT • The optics cover of the safety laser scanner is an

optical component. Make sure that the optics cover

does not become dirty or scratched during unpacking

and mounting. Prevent fingerprints on the optics cover.

Wear the gloves supplied with the new optics cover

during replacement.

• Only qualified safety personnel may replace the optics

cover in a dust- and dirt-free environment.

• Never replace the optics cover during continuous

operation, as dust particles could penetrate into the

safety laser scanner.

• You must prevent contamination on the inside of the

optics cover, for example due to fingerprints.

• Do not use an additional sealant, such as silicone, for

sealing the optics cover. Any vapors that are created

may damage the optical components.

• Mount the optics cover according to the following

instructions, to achieve IP65 leak tightness of the

housing.

• Use new optics covers exclusively as a replacement.

• You must provide ESD protection during the

replacement of the optics cover.

• The IP65 enclosure rating is only valid if the safety laser

scanner is closed and the safety plug is mounted.

Tools Required:

• TX10 torque wrench Figure 1 - Attach the Optics Cover (Use T10 Torx Bit)

Publication 442L-IN001B-EN-P - November 2020 | Supersedes Publication 442L-IN001A-EN-P - March 2017

Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur

8020213

10002502987 Ver 00

Allen-Bradley, expanding human possibility, Guardmaster, Rockwell Automation, and SafeZone are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.

For technical support, visit rok.auto/support.

Waste Electrical and Electronic Equipment (WEEE)

Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.

At the end of life, this equipment should be collected separately from any unsorted municipal waste.

Rockwell Automation Support

Use these resources to access support information.

Documentation Feedback

Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.

Technical Support Center Find help with how-to videos, FAQs, chat, user forums, and product notification updates. rok.auto/support

Knowledgebase Access Knowledgebase articles. rok.auto/knowledgebase

Local Technical Support Phone Numbers Locate the telephone number for your country. rok.auto/phonesupport

Literature Library Find installation instructions, manuals, brochures, and technical data publications. rok.auto/literature

Product Compatibility and Download Center

(PCDC)

Download firmware, associated files (such as AOP, EDS, and DTM), and access product

release notes. rok.auto/pcdc

Dieses Handbuch passt für folgende Modelle

Andere Rockwell Automation Industrieanlagen Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley IntelliVAC 1503VC-BMC5 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView Plus 400 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley LDAT-S03 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley QuickStick 150 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140G Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140G-G-RMB Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley LDAT Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Kinetix 5700 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation MagneMotion MagneMover LITE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 750-21G Bedienungsanleitung

Rockwell Automation

Rockwell Automation Discrete Machine Performance Solution Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 7703E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MegaDySC Dynamic Voltage Sag... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley VersaVirtual Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1771-IFMS Bedienungsanleitung

Rockwell Automation

Rockwell Automation RELIANCE ELECTRIC INVERTRON DBU-50 Bedienungsanleitung

Rockwell Automation

Rockwell Automation VersaView 5100 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 104-C60 Bedienungsanleitung

Rockwell Automation

Rockwell Automation iTRAK Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster Minotaur MSR178DP Bedienungsanleitung

Rockwell Automation

Rockwell Automation 14C226 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1718-CBL65 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex AFE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 20P Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung