Rosewill RNX-G100 Bedienungsanleitung

Wireless G USB Adapter RNX-G100

Wireless G PCMCIA Adapter RNX-G200

Wireless G PCI Adapter RNX-G300(E)

User Manual

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

Contents

Chapter 1 Introduction ..................................................................................... 3

1.1 Welcome ............................................................................................................... 3

1.2 About This Guide................................................................................................... 3

1.3 Copyright statement.............................................................................................. 3

1.4 Contents of Package............................................................................................. 3

1.5 Before you begin ................................................................................................... 3

Chapter 2 Designing Your Wireless Network ........................................................ 4

2.1 Cardbus adapter- RNX-G200................................................................................ 4

2.2 PCI adapter- RNX-G300(E).................................................................................... 4

2.3 USB adapter- RNX-G100 ...................................................................................... 5

Chapter 3 Install Wireless Adapter ..................................................................... 5

3.1 Install Driver and Utility.......................................................................................... 5

3.2 Install Adapter ....................................................................................................... 7

3.3 Configuration your wireless adapter...................................................................... 9

Chapter 4 Using the Wireless Client Configuration Utility .................................... 10

4.1 Network Status.................................................................................................... 10

4.2 Site Survey .......................................................................................................... 11

4.3 Admin .................................................................................................................. 13

4.4 Profile Manager ................................................................................................... 15

Chapter 5 Troubleshooting.............................................................................. 19

APPENDIX A Specifications ............................................................................... 20

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

Chapter 1 Introduction

1.1 Welcome

The Wireless Network Adapter is a powerful 32-bit Cardbus/PCI/USB Adapter that installs

quickly and easily into PCs. The Adapter can be used in Ad-Hoc mode to connect directly with

other cards for peer-to-peer file sharing or in Infrastructure mode to connect with a wireless

access point or router for access to the Internet in your office or home network.

The Wireless Cardbus/PCI/USB Adapter connects you with 802.11g networks at up to an

incredible 54Mbps! And for added versatility, it can also interoperate with all the up to 11Mbps

802.11b products found in homes, businesses, and public wireless hotspots around the country.

And in either mode, your wireless communications are protected by industrial-strength WPA, so

your data stays secure.

1.2 About This Guide

This User Manual contains information on how to install and configure your Wireless Adapter to

get your network started accessing the Internet. It will guide you through the correct

configuration steps to get your device up and running.

Note and Caution in this manual are highlighted with graphics as below to indicate important

information.

Contains related information corresponds to a topic.

Necessary steps, actions or messages should not be ignored.

1.3 Copyright statement

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any

form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise

without the prior writing of the publisher.

1.4 Contents of Package

zWireless network RNX-G200/RNX-G300(E)/RNX-G100 adapter

zManual, Drivers and Utility on CD

zQuick Installation Guide

If any of the above items are missing, please contact your reseller.

1.5 Before you begin

You must have at least the following:

zA laptop computer/desktop PC with an available 32-bit Cardbus/PCI/USB slot

zAt least a 300MHz processor and 32MB of memory

zWindows 98SE, ME, 2000, XP, Vista

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

zA CD-ROM Drive

zCardbus/PCI/USB controller properly installed and working in the laptop computer

zA 802.11g or 802.11b Access Point (for infrastructure Mode) or another 802.11g or 802.11b

wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)

Chapter 2 Designing Your Wireless Network

The wireless Cardbus/PCI/USB Adapter supports up to 54 Mbps connections. This card is fully

compliant with the specifications defined in IEEE802.11g standard. It is designed to complement

PCI Local Bus computers and supports Windows 98SE/Me/2000/XP/Vista.

2.1 Cardbus adapter- RNX-G200

Figure 2-1

The two status LED indicators of the Cardbus wireless adapter are described in the following.

zPWR ON (Green): Indicates the Adapter is ready

zLnk/Act ON (Green): Indicates a valid connection

zLnk/Act Flashing: Indicates the Adapter is transmitting or receiving data.

2.2 PCI adapter- RNX-G300(E)

Figure 2-2

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

The status LED indicators of the PCI wireless adapter are described in the following.

zLnk/Act ON (Green): Indicates a valid connection

zLnk/Act Flashing: Indicates the Adapter is transmitting or receiving data.

2.3 USB adapter- RNX-G100

The status LED indicators of the USB wireless adapter are described in the following.

zLnk/Act ON (Green): Indicates a valid connection

zLnk/Act Flashing: Indicates the Adapter is transmitting or receiving data.

Figure 2-3

Chapter 3 Install Wireless Adapter

3.1 Install Driver and Utility

zInsert the Driver and Utility CD-ROM into the CD-ROM driver.

zThe Wizard should run automatically, and Figure 2-1 should appear. If it dose not, click the

Start button and choose Run. In the field that appears, enter D:\autorun.exe (if ‘’D’’ is the

letter of your CD-ROM drive).

Figure 2-1

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

zClick Install Driver & Utility on the Wireless Client Configuration Utility screen.

Figure 2-2

zFollow the Install Shield Wizard steps, and click Finish when done.

Figure 2-3

zNow turn off your PC or notebook

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

3.2 Install Adapter

3.2.1 Cardbus Adapter- RNX-G200

zPower on your notebook, let the operating system boot up completely, and log in as needed.

zHold the adapter with the LOGO facing up and insert it into a Cardbus slot.

Figure 3-1

zIf the Found New Hardware Wizard displays, choose Install the software automatically

(Recommended), and click Next button. The driver will be installed automatically.

Figure 3-2

3.2 .2 PCI Adapter- RNX-G300(E)

zOpen your PC case and locate an available PCI on the motherboard.

zSlide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot’s

contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after the

adapter is firmly in place, secure its fastening tab to your PC’s chassis with a mounting

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

screw. Then close your PC.

zAttach the external antenna to the adapter’s antenna port.

zPower on the PC.

Figure 3-3

zIf the Found New Hardware Wizard displays, choose install the software automatically

(Recommended), and click Next button. The driver will be installed automatically.

3.2.3 USB Adapter - RNX-G100

zPower on your PC, let the operating system boot up completely, and log in as needed.

zHold the adapter and insert it into a USB slot.

zIf the Found New Hardware Wizard displays, choose install the software automatically

(Recommended), and click Next button. The driver will be installed automatically.

Figure 3-4

You have now completed the driver and hardware installation for the Adapter.

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

3.3 Configuration your wireless adapter

zThe Wireless Client Configuration Utility screen will appear automatically.

Figure 4-1

zClick the Site Survey tab then click the Refresh button to search for available wireless

networks.

RNX-G100 / RNX-G200 / RNX-G300(E) User Manual

Figure 4-2

zTo connect to one of the networks on the list, select the wireless network, and click

Associate button.

Chapter 4 Using the Wireless Client Configuration Utility

Use the Wireless Client Configuration Utility to check the link information, search for available

wireless networks, or create profiles that hold different configuration settings. You can

double-click the icon on your system desktop start it. Another way to start the Configuration

Utility is to click on Start>Programs>Wireless Client Configuration Utility>WirelessCfg.

If you are using Windows XP, you can use either the Zero Configuration Utility or the Wireless

Client Configuration

4.1 Network Status

The Network Status tab displays signal strength and link information, Internet Protocol (TCP/IP).

Andere Handbücher für RNX-G100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rosewill PCI-Karte Handbücher

Rosewill

Rosewill RC-223 Bedienungsanleitung

Rosewill

Rosewill RC-303 Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Rosewill

Rosewill RC-302 Bedienungsanleitung

Rosewill

Rosewill RC-110 Bedienungsanleitung

Rosewill

Rosewill RC503 Bedienungsanleitung

Rosewill

Rosewill RC-304 Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Rosewill

Rosewill RC-510 Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Rosewill

Rosewill RC-20002 Bedienungsanleitung

Rosewill

Rosewill RC-305E Bedienungsanleitung

Rosewill

Rosewill RC-213 Bedienungsanleitung

Rosewill

Rosewill RC-209 Bedienungsanleitung

Rosewill

Rosewill RC601 Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Rosewill

Rosewill RC-20003 Bedienungsanleitung

Rosewill

Rosewill RC304-E Bedienungsanleitung

Rosewill

Rosewill RNX-N150PCe Bedienungsanleitung

Rosewill

Rosewill RC-301EU Bedienungsanleitung

Rosewill

Rosewill RC303 Bedienungsanleitung

Rosewill

Rosewill RSV-S4-6G Bedienungsanleitung

Rosewill

Rosewill RC-100 Bedienungsanleitung

Rosewill

Rosewill RC-300 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung