ACME Diamonds II Bedienungsanleitung

CONTENTS

7. Troubleshooting ..................................................................................................... ..21

8. Fixture Cleaning ........................................................................................................21

1. Safety Instructions ................................................................................................. 2

2. Technical Specifications .......................................................................................... 4

3. Control Panel ......................................................................................................... 5

4. How To Set The Unit ............................................................................................... 6

6.Control By Universal DMX Controller ......................................................................11

6.1 DMX512 Connection ...................................................................................... ..11

6.2 Address Setting ................................................................................................ 12

6.3 DMX512 Configuration ..................................................................................... 13

5. How to Control the Unit.......................................................................................... 10

1. Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user,

be sure that they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty.

The dealer will not accept liability for any resulting defects or problems.

Unpack and check carefully that there is no transportation damage before using

the unit.

This product is for indoor use only.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead

of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm

from adjacent surfaces.

Be sure that no ventilation slots are blocked, otherwise the unit will be

overheated.

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure

that they also receive this instruction booklet.

40℃.

DO NOT connect the device to any dimmer pack.

Make sure there are no flammable materials close to the unit while operating to

avoid fire hazard.

Examine the power wires carefully; replace them immediately if there is any

damage.

Unit’s surface temperature may reach up to 65℃. DO NOT touch the housing

bare-handed during its operation.

Avoid any inflammable liquids, water or metal objects entering the unit. Once it

happens, cut off the mains power immediately.

DO NOT operate in dirty or dusty environment, do clean fixtures regularly.

DO NOT touch any wire during operation as there might be a hazard of electric

shock.

Before operating, ensure that the voltage and frequency of power supply match

the power requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid

electric shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA:

Avoid power wires together twist other cables.

The minimum distance between light output and the illuminated surface must be

more than 0.5 meters.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are

visibly damaged.

DO NOT start on the unit without bulb enclosure or when housing is damaged.

Installation:

The fixture should be mounted via its Omega Quick Release Clamp bracket. Always

ensure that the unit is firmly fixed to avoid vibration and slipping while operating and

make sure that the structure to which you are attaching the unit is secure and is able

to support a weight of 10 times of the fixtures weight. Always use a safety cable that

can hold 12 times of the weight of the fixture when installing.

The equipment must be installed by professionals. It must be installed in a place

where is out of the reach of people and no one can pass by or under

DO NOT open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people

can lead to damage or malfunction. Please contact the nearest authorized

technical assistance center if needed.

Disconnect the mains power if the fixture is has not been used for a long time.

DO use the original packing materials before transporting it again.

DO NOT look directly at the light while the bulb is on.

2. Technical Specifications

Power Voltage:

100-240V~ 50/60Hz

Power Consumption:

185W

Light Source:

10W RGB

Beam Angle:

30°

Dimmer/Shutter:

Smooth dimming from 0-100%; outstanding strobe effect with variable speed

Control:

DMX Channel:：27 / 52 CH

Control Mode: Voice CONTROL/SELF-WALKING/DMX512/Master/Slave/ILDA

Construction:

Display: OLED

Data In/Out: 3-pin (5-pin XLR is optional)

Power In/Out: Power Connector in/out

Protection Rating: IP20

Features:

Results: equipped with 50K Vibration Mirror, provide beam and a variety of built-

in laser patterns and animation effects

For Pangolin, Phoenix, Mamba and other laser light show software

Suitable for clubs, bars, nightclubs, TV stations, advertising promotion and other

places

The chassis adopts dustproof design, follows the classic double-layer design, the

enclosure of the chassis is better, can effectively insulate the lampblack of the bar

Lightweight, easy to transport and hanging lights, high brightness, color unity.

尺寸/重量：

9.1”x12.6”x7.2”, 28lbs

3. Control Panel

POWERCON Version:

1. POWER SWITCH: Turn Power On/off

2. KNOB

3. Power Input (POWERCON version) : connect power supply

4：EASY ILDA

5. Screen: Liquid Crystal Display

6.Ilda interface

7. DMX INPUT: For DMX512 connections, use a 3-core XLR signal line to connect the

lamp to the DMX console, and enter DMX signal (optional)

8. DMX output: For DMX512 connections, use 3-core XLR signal lines to connect to

the next machine (optional 5-core)

9. Key Switch: to set to RUN, the lamp will light up

4.How To Set The Unit

4.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until

the required function is shown on the monitor. Select the function by the ENTER button. Use the

UP/DOWN button to choose the submenu, press the ENTER button to store and automatically

return to the last menu. Press the MENU button or let the unit idle One Minute to exit menu mode.

TFT screen menu list as following

First menu Secondary menu

DMX address 1 - 512

Auto in-play

Fast Beat ON/OFF

Medium Beat ON/OFF

Slow Beat ON/OFF

Animation ON/OFF

Music in-play

Fast Beat ON/OFF

Medium Beat ON/OFF

Slow Beat ON/OFF

Animation ON/OFF

SD card Mode

Repeat ON/OFF ONE / FILE / ALL

Music ON/OFF

Directory 1/8

F i l e 1/4 8

Test Mode Image 1-3

System

Setting

Channel Setting 27CH /

52CH

Master / Slave

ON/OFF

Scan-safety ON/OFF

EASY ILDA ON/OFF

Language CH/EN

Sound Sense 0-100

About

Channel Num

Operational Mode

DMX Address

Case temperature

Running Time

Hardware version

Software version

Reset Setting

Master

Setting

Color RGB/G

Scan 15-50K

Brightness 0-255

Design

R Fade 0-255

G Fade 0-255

B Fade 0-255

Zoom 0-255

X Size 0-255

Y Size 0-255

Invert X ON/OFF

Invert Y ON/OFF

DMX Addresses

To select DMX Addresses，Press the ENTER button to confirm that the current mode

will be displayed on the display, use the UP/DOWN button to select the DMX entry

address, use the Knob to find the start address (001-512) , and then press the Knob to

confirm and set. Go back to the main menu and select exit

Auto in-play

To select Auto in-play，Press the ENTER button to confirm that the current mode is

displayed on the screen, using the UP/DOWN button to select: Fast Beat，Medium

Beat，Slow Beat，Animation，press the Knob to confirm and set. Go back to the

main menu and select exit.

Music in-play

To select Music in-play，Press the ENTER button to confirm that the current mode is

displayed on the screen, using the UP/DOWN button to select: Fast Beat，Medium

Beat，Slow Beat，Animation，press the Knob to confirm and set. Go back to the main

menu and select exit.

SD card mode

To select SD card mode ，Press the ENTER button to confirm that the current mode

will be displayed on the display, using the UP/DOWN button to select: Repeat, Music,

Directory, File , press the button to confirm. Go to the SD file, select the file or folder

you want to play, and press the button to confirm. Go back to the main menu and

select exit.

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME Diabolo Bedienungsanleitung

ACME

ACME Solar Flare Bedienungsanleitung

ACME

ACME Stage Par 220MP-220 Bedienungsanleitung

ACME

ACME SABER Mini Bedienungsanleitung

ACME

ACME Sunrise Bedienungsanleitung

ACME

ACME LED Move 600SE Bedienungsanleitung

ACME

ACME Colortec 250 Bedienungsanleitung

ACME

ACME LED-835B Bedienungsanleitung

ACME

ACME GLAMOUR 700Z RGBY Bedienungsanleitung

ACME

ACME Theatre Spot 150m Bedienungsanleitung

ACME

ACME TOUR PIXEL BAR 1010 II Bedienungsanleitung

ACME

ACME LED-767 RGBW Bedienungsanleitung

ACME

ACME LED-900 A Bedienungsanleitung

ACME

ACME CHIRON Bedienungsanleitung

ACME

ACME Spartan Hybrid Bedienungsanleitung

ACME

ACME FLANDINA 22 IP Bedienungsanleitung

ACME

ACME LED STROBE 50 Bedienungsanleitung

ACME

ACME Inferno Bedienungsanleitung

ACME

ACME Thunderroar Bedienungsanleitung

ACME

ACME TRACK 10 Bedienungsanleitung

ACME

ACME ICARUS 620 Bedienungsanleitung

ACME

ACME BP-183 RGBW S R DXX Bedienungsanleitung

ACME

ACME CA-DC6S Bedienungsanleitung

ACME

ACME BF-1500ND B Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung