Agilent Technologies 8511B Service-Handbuch

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

Agilent Technologies 8511B

Frequency Converter Test Set

Operating and Service

Manual

Agilent Part Number: 08511-90073

Printed in USA November 2001

Supersedes November 1999

ii Agilent 8511B Test Set Operating and Service Manual

Notice

The information contained in this document is subject to change without

notice.

Agilent Technologies makes no warranty of any kind with regard to this

material, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. Agilent shall not be

liable for errors contained herein or for incidental or consequential damages

in connection with the furnishing, performance, or use of this material.

Agilent assumes no responsibility for the use or reliability of its software on

equipment that is not furnished by Agilent.

This document contains proprietary information which is protected by

photocopied, reproduced, or translated to another language without prior

written consent of Agilent Technologies.

Hewlett-Packard to Agilent Technologies Transition

This documentation supports a product that previously shipped under the

Hewlett-Packard company brand name. The brand name has now been

changed to Agilent Technologies. The two products are functionally

identical, only our name has changed. The document still includes references

to Hewlett-Packard products, some of which have been transitioned to

Agilent Technologies.

Restricted Rights Legend

Use, duplication, or disclosure by the U.S. Government is subject to

restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical

Data and Computer Software clause at DFARS 252.227-7013 for DOD

agencies, and subparagraphs (c)(1) and (c)(2) of the Commercial Computer

Software Restricted Rights clause at FAR 52.227-19 for other agencies.

Agilent 8511B Test Set Operating and Service Manual iii

What You’ll Find in This Manual…

Chapter 1 •General Information

Chapter 2 •Specifications

Chapter 3 •Installation

Chapter 4 •Operations

Chapter 5 •Performance Tests

Chapter 6 •Test Set Troubleshooting

Chapter 7 •Replacement Procedures

Chapter 8 •Replaceable Parts

iv Agilent 8511B Test Set Operating and Service Manual

Warranty

Certification Agilent Technologies certifies that this product met its published

specifications at the time of shipment from the factory. Agilent further

certifies that its calibration measurements are traceable to the United States

National Institute of Standards and Technology (NIST, formerly NBS), to the

extent allowed by the Institute’s calibration facility, and to the calibration

facilities of other International Standards Organization members.

Warranty This Agilent system product is warranted against defects in materials and

workmanship for a period corresponding to the individual warranty periods

of its component products. Instruments are warranted for a period of one

year. During the warranty period, Agilent will, at its option, either repair or

replace products that prove to be defective.

Warranty service for products installed by Agilent and certain other products

designated by Agilent will be performed at Buyer’s facility at no charge

within Agilent service travel areas. Outside Agilent service travel areas,

warranty service will be performed at Buyer’s facility only upon Agilent’s

prior agreement and Buyer shall pay Agilent’s round trip travel expenses. In

all other areas, products must be returned to a service facility designated by

Agilent.

For products returned to Agilent for warranty service, Buyer shall prepay

shipping charges to Agilent and Agilent shall pay shipping charges to return

the product to Buyer. However, Buyer shall pay all shipping charges, duties,

and taxes for products returned to Agilent from another country.

Agilent warrants that its software and firmware designated by Agilent for

use with an instrument will execute its programming instructions when

properly installed on that instrument. Agilent does not warrant that the

operation of the instrument, or software, or firmware will be uninterrupted or

error free.

LIMITATION OF WARRANTY. The foregoing warranty shall not apply

to defects resulting from improper or inadequate maintenance by Buyer,

Buyer-supplied software or interfacing, unauthorized modification or

misuse, operation outside of the environmental specifications for the

product, or improper site preparation or maintenance.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. AGILENT

SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Agilent 8511B Test Set Operating and Service Manual v

EXCLUSIVE REMEDIES. THE REMEDIES PROVIDED HEREIN ARE

BUYER’S SOLE AND EXCLUSIVE REMEDIES. AGILENT SHALL

NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED

ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.

Assistance Product maintenance agreements and other customer assistance agreements

are available for Agilent products.

For assistance, call your local Agilent Sales and Service Office (refer to

“Service and Support” on page vi).

vi Agilent 8511B Test Set Operating and Service Manual

Service and Support

Any adjustment, maintenance, or repair of this product must be performed

by qualified personnel. Contact your customer engineer through your local

Agilent Service Center. By internet, phone, or fax, get assistance with all

your test and measurement needs.

Online assistance: www.agilent.com/find/assist

United States

(tel) 1 800 452 4844 Latin America

(tel) (305) 269 7500

(fax) (305) 269 7599

New Zealand

(tel) 0 800 738 378

(fax) (+64) 4 495 8950

Japan

(tel) (+81) 426 56 7832

(fax) (+81) 426 56 7840

Malaysia

(tel) 1 800 828 848

(fax) 1 800 801 664

Philippines

(tel) (632) 8426802

(tel) (PLDT subscriber only):

1 800 16510170

(fax) (632) 8426809

(fax) (PLDT subscriber only):

1 800 16510288

Taiwan

(tel) 0800-047-866

(fax) (886) 2 25456723

People’s Republic of China

(tel) (preferred): 800-810-0189

(tel) (alternate): 10800-650-0021

(fax) 10800-650-0121

Agilent 8511B Test Set Operating and Service Manual vii

Safety and Regulatory Information

Review this product and related documentation to familiarize yourself with

safety markings and instructions before you operate the instrument. This

product has been designed and tested in accordance with international

standards.

WARNING The WARNING notice denotes a hazard. It calls attention to a procedure,

practice, or the like, that, if not correctly performed or adhered to, could result

in personal injury. Do not proceed beyond a WARNING notice until the

indicated conditions are fully understood and met.

CAUTION The CAUTION notice denotes a hazard. It calls attention to an operating

procedure, practice, or the like, which, if not correctly performed or adhered

to, could result in damage to the product or loss of important data. Do not

proceed beyond a CAUTION notice until the indicated conditions are fully

understood and met.

Instrument Markings

When you see this symbol on yourinstrument, you should refer to the instrument’s

instruction manual for important information.

This symbol indicates hazardous voltages.

The laser radiation symbol is marked on products that have a laser output.

This symbol indicates that the instrument requires alternating current (ac) input.

The CE mark is a registered trademark of the European Community. If it is

accompanied bya year, itindicates the year the design was proven.

The CSA mark is a registered trademark of the Canadian Standards Association.

1SM1-A This text indicates that the instrument is an Industrial Scientificand Medical Group 1

Class A product (CISPER 11, Clause 4).

This symbol indicates that the power line switch is ON.

This symbol indicates that the power line switch is OFF or in STANDBY position.

viii Agilent 8511B Test Set Operating and Service Manual

Safety Earth

Ground This is a Safety Class I product (provided with a protective earthing

terminal). An uninterruptible safety earth ground must be provided from the

main power source to the product input wiring terminals, power cord, or

supplied power cord set. Whenever it is likely that the protection has been

impaired, the product must be made inoperative and secured against any

unintended operation.

Before Applying Power Verify that the product is configured to match the available main power

source as described in the input power configuration instructions in this

manual. If this product is to be powered by autotransformer, make sure the

common terminal is connected to the neutral (grounded) side of the ac power

supply.

Agilent 8511B Test Set Operating and Service Manual ix

DECLARATION OF CONFORMITY

According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014

Manufacturer’s Name: Agilent Technologies, Inc.

Manufacturer’s Address: 1400 Fountaingrove Parkway

Santa Rosa, CA 95403-1799

USA

Declares that the products

Product Name: Frequency Converter

Model Number: 8511A, 8511B

Product Options: This declaration covers all options of the above

products.

Conform to the following product specifications:

Standard Limit

EMC: CISPR 11:1990 / EN 55011-1991 Group 1, Class A

IEC 801-2:1984/EN 50082-1:1992 4 kV CD, 8 kV AD

IEC 801-3:1984/EN 50082-1:1992 3 V/m, 80 - 1000 MHz

IEC 801-4:1988/EN 50082-1:1992 0.5 kV sig., 1 kV power

Safety: IEC 61010-1:1990 + A1:1992 + A2:1995 / EN 61010-1:1993 +A2:1995

CAN/CSA-C22.2 No. 1010.1-92

Supplementary Information:

The products herewith comply with the requirements of the Low Voltage Directive

73/23/EEC and the EMC Directive 89/336/EEC and carry the CE-marking accordingly.

Santa Rosa, CA, USA 2 September 2000 Greg Pfeiffer/Quality Engineering Manager

For further information, please contact your local Agilent Technologies sales office, agent or distributor.

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies 7693A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6890 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1574A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity G1315C Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1220 Infinity II LC Installations- und Betriebshandbuch

Agilent Technologies

Agilent Technologies 7694 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1200 series Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 2200 TapeStation Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies MX3000P Sicherheitsleitfaden

Agilent Technologies

Agilent Technologies BioCel 1200 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Intuvo 900 Benutzerhandbuch

Agilent Technologies

Agilent Technologies Cary 8454 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Cary 3500 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 850-DS Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1701EA Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7820A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5975 MSD Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1100 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies GPC/SEC Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8890 Merkblatt

Agilent Technologies

Agilent Technologies agilent 7683B Montage- und Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1100 Series Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung