Hach 2100Q Kurzanleitung

DOC022.98.80041

2100Q and 2100Qis

08/2021, Edition 6

Basic User Manual

Basis-Benutzerhandbuch

Manuel d'utilisation simplifié

Manual básico del usuario

Manuale di base per l'utente

Manual básico do utilizador

Základní návod k použití

Grundlæggende brugerhåndbog

Basisgebruikershandleiding

Podstawowy podręcznik użytkownika

Grundläggande bruksanvisning

Peruskäyttöohje

Основно ръководство за потребителя

Alapvető felhasználói útmutató

Manual de utilizare de bază

Базовое руководство пользователя

Temel Kullanım Kılavuzu

Osnovni uporabniški priročnik

Základný návod na použitie

Osnovni korisnički priručnik

Βασικό εγχειρίδιο χρήστη

Table of Contents

English...................................................................................................................................................................................................3

Deutsch...............................................................................................................................................................................................18

Français.............................................................................................................................................................................................. 35

Español............................................................................................................................................................................................... 52

Italiano................................................................................................................................................................................................. 68

Português.......................................................................................................................................................................................... 84

Čeština.............................................................................................................................................................................................. 100

Dansk.................................................................................................................................................................................................116

Nederlands...................................................................................................................................................................................... 131

Polski................................................................................................................................................................................................. 147

Svenska............................................................................................................................................................................................ 164

Suomi.................................................................................................................................................................................................180

български....................................................................................................................................................................................... 195

Magyar.............................................................................................................................................................................................. 213

Română............................................................................................................................................................................................ 229

Русский............................................................................................................................................................................................ 245

Türkçe................................................................................................................................................................................................264

Slovenski.......................................................................................................................................................................................... 279

Slovenský jazyk............................................................................................................................................................................ 294

Hrvatski............................................................................................................................................................................................. 310

Ελληνικά........................................................................................................................................................................................... 325

Table of Contents

1 Specifications on page 3

2 General information

on page 4

3 Installation on page 7

4 User interface and navigation

on page 8

5 Startup on page 9

6 Standard operation on page 10

7 Advanced operation

on page 10

8 Maintenance on page 12

9 Troubleshooting on page 16

Section 1 Specifications

Specifications are subject to change without notice.

Specification Details

Measurement

method Ratio turbidimetric determination using a primary

nephelometric light scatter signal (90°) to the

transmitted light scatter signal.

Regulatory 2100Q: Meets EPA Method 180.1

Lamp source 2100Q: Tungsten filament lamp

2100Qis: Light-emitting diode (LED)

Range 0–1000 NTU (FNU)

Accuracy ±2% of reading plus stray light from 0–1000 NTU

(FNU)

Repeatability ±1% of reading or 0.01 NTU (FNU), whichever is

greater

Resolution 0.01 NTU on lowest range

Stray light ≤ 0.02 NTU (FNU)

Signal

averaging Selectable on or off

Detector Silicon Photodiode

Specification Details

Overvoltage

category II

Altitude 2000 m (6562 ft) maximum

Reading modes Normal (Push to Read), Signal Averaging or Rapidly

Settling Turbidity

Calibration

options Single step RapidCal for Low-Level Regulatory

Reporting from 0–40 NTU (FNU)

Full range calibration from 0–1000 NTU (FNU)

Calibration to degrees of turbidity

Calibration

logger Records the last 25 successful calibrations

Verification

logger Logs the last 250 successful verifications

Data logger 500 records

Power

requirement Battery powered: 6 VDC maximum (4 NiMH 1.2 V

AA batteries or 4 alkaline 1.5 V AA batteries)

External power supply: 100–240 VAC ± 10%; output

5 W (9 VDC, 600 mA maximum)

Operating

conditions Temperature: 0 to 50 °C (32 to 122 °F)

Relative Humidity: 0–90% at 30 °C, 0–80% at 40 °C,

0–70% at 50 °C, noncondensing

Storage

conditions –40 to 60 °C (–40 to 140 °F), instrument only

Interface Optional USB

Sample

required 15 mL (0.5 oz.)

English 3

Specification Details

Sample cells Round cells 60 x 25 mm (2.36 x 1 in.) borosilicate

glass with screw caps

Dimensions 22.9 x 10.7 x 7.7 cm (9.0 x 4.2 x 3.0 in.)

Weight 530 g (1.17 lb) without batteries

620 g (1.37 lb) with four AA alkaline batteries

Meter

enclosure

rating

IP67 (closed lid, battery and module compartment

excluded)

Protection class 2100Q/is: Class III

Power supply: Class II

Pollution

degree 2

Environmental

conditions Indoor and outdoor use

Certification CE certified

Warranty 1 year (EU: 2 years)

Section 2 General information

In no event will the manufacturer be liable for direct, indirect, special,

incidental or consequential damages resulting from any defect or

omission in this manual. The manufacturer reserves the right to make

changes in this manual and the products it describes at any time, without

notice or obligation. Revised editions are found on the manufacturer’s

website.

2.1 Safety information

The manufacturer is not responsible for any damages due to

misapplication or misuse of this product including, without limitation,

direct, incidental and consequential damages, and disclaims such

damages to the full extent permitted under applicable law. The user is

soley responsible to identify critical application risks and install

appropriate mechanisms to protect processes during a possible

equipment malfunction.

Please read this entire manual before unpacking, setting up or operating

this equipment. Pay attention to all danger and caution statements.

Failure to do so could result in serious injury to the operator or damage

to the equipment.

Make sure that the protection provided by this equipment is not impaired.

Do not use or install this equipment in any manner other than that

specified in this manual.

2.2 Use of hazard information

DANGER

Indicates a potentially or imminently hazardous situation which, if not

avoided, will result in death or serious injury.

W A R N I N G

Indicates a potentially or imminently hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation that may result in minor or

moderate injury.

NOTICE

Indicates a situation which, if not avoided, may cause damage to the

instrument. Information that requires special emphasis.

2.3 Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or

damage to the instrument could occur if not observed. A symbol on the

instrument is referenced in the manual with a precautionary statement.

4 English

This is the safety alert symbol. Obey all safety messages

that follow this symbol to avoid potential injury. If on the

instrument, refer to the instruction manual for operation or

safety information.

This symbol indicates that a risk of electrical shock and/or

electrocution exists.

Electrical equipment marked with this symbol may not be

disposed of in European domestic or public disposal

systems. Return old or end-of-life equipment to the

manufacturer for disposal at no charge to the user.

2.4 Compliance and certification

CAUTION

This equipment is not intended for use in residential environments and

may not provide adequate protection to radio reception in such

environments.

Canadian Radio Interference-Causing Equipment Regulation,

ICES-003, Class A:

Supporting test records reside with the manufacturer.

This Class A digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numérique de classe A répond à toutes les exigences de la

réglementation canadienne sur les équipements provoquant des

interférences.

FCC Part 15, Class "A" Limits

Supporting test records reside with the manufacturer. The device

complies with Part 15 of the FCC Rules. Operation is subject to the

following conditions:

1. The equipment may not cause harmful interference.

2. The equipment must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications to this equipment not expressly approved by

the party responsible for compliance could void the user's authority to

operate the equipment. This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will be

required to correct the interference at their expense. The following

techniques can be used to reduce interference problems:

1. Disconnect the equipment from its power source to verify that it is or

is not the source of the interference.

2. If the equipment is connected to the same outlet as the device

experiencing interference, connect the equipment to a different

outlet.

3. Move the equipment away from the device receiving the interference.

4. Reposition the receiving antenna for the device receiving the

interference.

5. Try combinations of the above.

2.5 Product overview

The 2100Q and 2100Qis portable turbidimeters measure turbidity from

0 to 1000 NTU (FNU). Primarily for field use, the portable meter operates

on four AA batteries. Data can be stored and transferred to a printer,

computer or USB storage device.

English 5

Figure 1 Product overview

1 Power on or off 5 Alignment arrow

2 Backlight keys (+ and -) 6 Module

3 Sample cell holder with lid 7 Lamp compartment

4 Attachment for lanyard 8 Battery compartment

2.6 Product components

Refer to Figure 2 to make sure that all components have been received.

If any of these items are missing or damaged, contact the manufacturer

or a sales representative immediately.

Figure 2 2100Q and 2100Qis components

1 2100Q or 2100Qis turbidimeter 6 Silicone oil

2 Carrying case 7 20, 100 and 800 NTU StablCal

calibration standards

3 User manual and Quick

reference guide

8 AA alkaline batteries (pk/4)

4 Oiling cloth 9 StablCal 10 NTU verification

standard

5 1" sample cell (10 mL) with

cap (pk/6)

6 English

Section 3 Installation

CAUTION

Multiple hazards. Only qualified personnel must conduct the

tasks described in this section of the document.

3.1 Install the battery

W A R N I N G

Explosion hazard. An expired battery can cause hydrogen

gas buildup inside the instrument. Replace the battery

before it expires. Do not store the instrument for long

periods with a battery installed.

W A R N I N G

Potential fire hazard. Use only alkaline or nickel metal hydride batteries

(NiMH) in the meter. Other battery types or incorrect installation can

cause a fire. Never mix battery types in the meter.

NOTICE

The battery compartment is not waterproof. If the battery compartment

becomes wet, remove and dry the batteries and dry the interior of the

compartment. Check the battery contacts for corrosion and clean them

if necessary.

NOTICE

When using nickel metal hydride (NiMH) batteries, the battery icon will

not indicate a full charge after freshly charged batteries have been

inserted (NiMH batteries are 1.2 V versus 1.5 V for alkaline batteries).

Even though the icon does not indicate complete charge, 2300 mAH

NiMH batteries will achieve 90% of instrument operation lifetime

(before recharge) versus new alkaline batteries.

NOTICE

To avoid potential damage to the meter from battery leakage, remove

the meter batteries prior to extended periods of non-use.

The meter can be powered with AA alkaline or rechargeable NiMH

batteries. To conserve battery life, the meter will power off after

10 minutes of inactivity, the backlight powers off after 30 seconds. This

time can be changed in the Power Management menu.

Note: Rechargeable batteries will only be recharged with the USB/power module.

Refer to the module documentation for further information.

For battery installation refer to Figure 3.

1. Remove the battery cover.

2. Install 4 AA alkaline or 4 AA nickel metal hydride (NiMH) batteries.

Make sure that the batteries are installed in the correct orientation.

3. Replace the battery cover.

Figure 3 Battery installation

English 7

Section 4 User interface and navigation

4.1 User interface

Figure 4 Keypad description

1 SETTINGS key: select menu

options for setting up the meter

5 UP key: scroll through menus,

enter numbers and letters

2 CALIBRATION key: shows

calibration screen, start

calibration, select cal options

6 RIGHT key (contextual): read

turbidity sample, selects or

confirms options, opens/jumps

to sub-menus

3 DOWN key: scroll through

menus, enter numbers and

letters

7 DATA MANAGEMENT key:

view, delete or transfer stored

data

4 LEFT key (contextual): access

for calibration verification,

cancels or exits the current

menu screen to the previous

menu screen

4.2 Display description

The measurement screen shows the turbidity, unit, calibration status,

date and time, operator ID (if setup) and sample ID (if setup). Refer to

Figure 5.

8 English

Figure 5 Single screen display

1 Operator identification 9 NTU (Nephelometric Turbidity

Unit) or FNU (Formazin

Turbidity Unit)

2 Sample identification 10 Reading mode: Rapidly

Settling Turbidity (Target

icon)

3 Stability or display lock

indicator

11 Reading mode: Signal

Average (X-bar icon)

4 Calibration status indicator

(Calibration OK=pass)

12 Time

5 Calibration status indicator

(Calibration ?=fail)

13 Date

6 Parameter title 14 Read (contextual: OK, Select)

7 AC power icon 15 Options (contextual)

8 Battery icon 16 Verification calibration

4.3 Navigation

The meter contains a Settings menu, Reading Options menu, Calibration

Options menu and Calibration Verification Options menu to change

various options. Use the UP and DOWN keys to highlight different

options. Push the RIGHT key to select an option. There are two ways to

change options:

1. Select an option from a list: Use the UP and DOWN keys to select an

option. If check boxes are shown, more than one option can be

selected. Push the LEFT key under Select.

Note: To deselect check boxes, push the LEFT key under Deselect.

2. Enter an option value using the arrow keys:

Push the UP and DOWN keys to enter or change a value.

3. Push the RIGHT key to advance to the next space.

4. Push the RIGHT key under OK to accept the value.

Section 5 Startup

5.1 Turn the meter on and off

Push the ON/OFF key to turn on or turn off the meter. If the meter

does not turn on, make sure that the batteries, or the module, are

properly installed or that the AC power supply is properly connected to

an electrical outlet.

Note: The Auto-Shutoff option can also be used to turn off the meter. Additional

information is available on the manufacturer's website.

5.2 Change the language

There are three options to set the language:

• The display language is selected when the meter is powered on for

the first time.

• The display language is selected when the power key is pushed and

held.

• The language can be changed from the Settings menu.

English 9

1. Select a language from the list. Confirm with OK.

2. Push Done when the update is complete.

5.3 Change the date and time

The date and time can be changed from the Date & Time menu.

1. Push the SETTINGS key and select Date & Time.

2. Update the time and date information:

Option Description

Format Select one of the formats for the date and time:

yyyy-mm-dd 24h

yyyy-mm-dd 12h

dd-mm-yyyy 24h

dd-mm-yyyy 12h

mm/dd/yyyy 24h

mm/dd/yyyy 12h

Date Enter the current date

Time Enter the current time

The current date and time will be shown on the display.

After the date and time setup, the meter is ready to take a reading.

Section 6 Standard operation

6.1 Use a sample ID

The sample ID tag is used to associate readings with a particular sample

location. If assigned, stored data will include this ID.

1. Select Sample ID in the Settings menu.

2. Select, create or delete a sample ID:

Option Description

Current ID Select an ID from a list. The current ID will be

associated with sample data until a different

ID is selected.

Create a New

Sample ID Enter a name for a new sample ID.

Delete Sample ID Delete an existing sample ID.

6.2 Use an operator ID

The operator ID tag associates readings with an individual operator. All

stored data will include this ID.

1. Select Operator ID in the Settings menu.

2. Select, create or delete an operator ID:

Option Description

Current ID Select an ID from a list. The current ID will be

associated with sample data until a different

ID is selected.

Create a New

Operator ID Enter a name for a new operator ID

(maximum 10 names can be entered).

Delete Operator ID Delete an existing operator ID.

Section 7 Advanced operation

7.1 Calibrate the turbidimeter with StablCal Stand-

ards

Note: For best accuracy use the same sample cell or four matched sample cells for

all readings during calibration. Insert the sample cell in the instrument cell

10 English

Andere Handbücher für 2100Q

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hach Laborausrüstung Handbücher

Hach

Hach LQV157.99.50001 Bedienungsanleitung

Hach

Hach QbD1200 AutoSampler Bedienungsanleitung

Hach

Hach PHC301 Bedienungsanleitung

Hach

Hach DR 5000 Bedienungsanleitung

Hach

Hach PHC281 Bedienungsanleitung

Hach

Hach 900 MAX Bedienungsanleitung

Hach

Hach ORBISPHERE K1200 Kurzanleitung

Hach

Hach AutoCAT 9000 Bedienungsanleitung

Hach

Hach TenSette 19700-01 Bedienungsanleitung

Hach

Hach TitraLab Kurzanleitung

Hach

Hach SIP 10 kit Bedienungsanleitung

Hach

Hach sensIONTM+ pH31 Bedienungsanleitung

Hach

Hach BOD Direct plus Kurzanleitung

Hach

Hach PHOSPHAX sigma High Range Bedienungsanleitung

Hach

Hach sensION+ pH3 Bedienungsanleitung

Hach

Hach LS 120 Bedienungsanleitung

Hach

Hach BODTrak II Bedienungsanleitung

Hach

Hach SIGMA 900 Bedienungsanleitung

Hach

Hach PHC729 Bedienungsanleitung

Hach

Hach MET ONE 3400 Series Bedienungsanleitung

Hach

Hach Lachat BD40HT Bedienungsanleitung

Hach

Hach PHC201 Bedienungsanleitung

Hach

Hach DRB 200 Bedienungsanleitung

Hach

Hach TitraLab KF1000 Series Kurzanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung