Moxa Technologies UPORT 1100 series Bedienungsanleitung

UPort 1100 Series User’s Manual

Fourth Edition, April 2009

www.moxa.com/product

Reproduction without permission is prohibited.

UPort 1100 Series User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in

accordance with the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the

part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but

not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this

manual, or to the products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa Technologies

assumes no responsibility for its use, or for any infringements on the rights of third parties that may result from

its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the

publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel:+1-714-528-6777

Fax:+1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel:+86-21-5258-9955

Fax:+86-10-6872-3958

Moxa Europe:

Tel:+49-89-3 70 03 99-0

Fax:+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:+886-2-8919-1230

Fax:+886-2-8919-1231

Table of Contents

Chapter 1 Introduction..............................................................................................1-1

Overview............................................................................................................................ 1-2

ADDC™ (Automatic Data Direction Control) for RS-485..................................... 1-2

ARDC (Automatic Recovery Data Communication).............................................. 1-2

Package Checklist .............................................................................................................. 1-2

Product Features................................................................................................................. 1-3

Product Specifications........................................................................................................ 1-3

LED Indicators................................................................................................................... 1-5

Adjustable Pull High/low, Terminator Resistors for the RS-485 Port.................... 1-6

Chapter 2 Installation and Configuration................................................................2-1

Initial Driver Installation.................................................................................................... 2-2

Hardware Installation.............................................................................................. 2-5

Windows 98/ME and Windows 2000 ..................................................................... 2-5

Windows XP, Windows 2003, and Windows Vista (32-bit and 64-bit) ................. 2-6

Configuring the COM Port ................................................................................... 2-12

Configuring the Converter .................................................................................... 2-13

Removing the Converter....................................................................................... 2-16

Uninstalling the Driver.......................................................................................... 2-17

Install Linux Driver.......................................................................................................... 2-18

Linux Kernel 2.4.20 and above............................................................................. 2-18

Linux Kernel 2.6.x................................................................................................ 2-19

Installing the Windows CE Driver ................................................................................... 2-21

Installation with an installation package for Win CE 6.0...................................... 2-22

Installation with an installation package for Win CE 5.0...................................... 2-30

Removing the Moxa WinCE 5.0 / CE 6.0 Driver ................................................. 2-32

Installation with a CAB File ................................................................................. 2-33

Removing the Moxa WinCE 5.0 / CE 6.0 Driver ................................................. 2-35

Chapter 3 Pin Assignment .......................................................................................3-1

UPort DB9 Pin Assignments.............................................................................................. 3-1

Terminal Block Pin Assignments ....................................................................................... 3-1

Chapter 1 Introduction

The UPort 1100 Series of USB-to-serial converters provide an easy way to add COM ports to your

computer. The UPort 1110 provides one RS-232 port, the UPort 1130 provides one

RS-422/RS-485 port, and the UPort 1150 and UPort 1150I each provide one RS-232/422/485 port.

As a plug and play USB device, the converters are perfect for mobile, instrumentation, and

point-of sale applications.

The UPort 1100 series include the following models:

UPort 1110: 1-port RS-232 USB-to-serial converter.

UPort 1130: 1-port RS-422/485 USB-to-serial converter.

UPort 1150: 1-port RS-232/422/485 USB-to-serial converter.

UPort 1150I: 1-port RS-232/422/485 USB-to-serial converter w/ isolation protection.

The following topics are covered in this chapter:

Overview

¾ADDC™ (Automatic Data Direction Control) for RS-485

¾ARDC (Automatic Recovery Data Communication)

Package Checklist

Product Features

Product Specifications

LED Indicators

¾Adjustable Pull High/low, Terminator Resistors for the RS-485 Port

UPort 1100 Series User’s Manual Introduction

Overview

The UPort 1110, UPort 1130, and UPort 1150/1150I are part of Moxa’s UPort line of

USB-to-serial converters. The UPort line provides a range of easy-to-use solutions for adding

COM ports through a PC’s USB port. Simply install the drivers, connect the UPort to your

computer, plug in your serial devices, and you’re ready to go. Programming is not required, and

you do not need to worry about IRQs, configuring a board, power requirements, or connection

schemes.

The UPort 1100 series provides single COM port expansion. The UPort 1110 adds one RS-232

port to your computer, which is the same type of COM port that is built into most PC

motherboards. The UPort 1130 adds one port that is configurable for RS-422, 2-wire RS-485, and

4-wire RS-485 modes. The UPort 1150/1150I adds one RS-232, RS-422, 2 wire RS-485, or 4 wire

RS-485 port to your computer. All of these models can operate at speeds of up to 12 Mbps, which

is much faster than the current maximum serial transfer rate. In addition, the UPort

1130/1150/1150I support ADDC™ (Automatic Data Direction Control) for RS-485 transmission.

The converter is bus-powered, so no external power supply is required.

ADDC™ (Automatic Data Direction Control) for RS-485

ADDC™ (Automatic Data Direction Control) makes it easier to manage 2-wire RS-485

half-duplex connections, eliminating the need for software interference. This means that it is not

necessary to write extra code for Windows applications to control the half-duplex protocol.

ADDC™ intelligence is built into all UPort products that support RS-485 transmission.

ARDC (Automatic Recovery Data Communication)

ARDC (Automatic Recovery Data Communication) makes it easier to recover data transmission,

even if the cable is accidentally unplugged. This means that you do not need to worry about

reconfiguring complex settings to ensure smooth data transmission. If the USB cable is

accidentally unplugged, simply plug it back into the same port and the converter will automatically

reconnect with the host and continue to transfer data. This feature not only eliminates the need for

reconfiguration, but also reduces the probability of data loss.

Package Checklist

The following items are included in your UPort package:

yUPort 1100 Series USB-to-serial converter

yUPort Documentation and Software CD

yUPort 1100 Series Quick Installation Guide

y5-year Warranty Statement

The UPort 1130/1150/1150I also come with the following item:

yMini DB9F-to-Terminal-Block Converter

NOTE: Please notify your sales representative if any of the above items are missing or damaged.

1-2

UPort 1100 Series User’s Manual Introduction

Product Features

The UPort converter has the following features:

yFull-Speed USB operation at up to 12 Mbps

yAdditional I/O or IRQ not required

ySerial transmission speed up to 921.6 Kbps

y64-byte FIFO and built-in hardware and software flow control

yBuilt-in 15 KV ESD protection

ySupport for RS-422, 2-wire RS-485, and 4-wire RS-485 (UPort 1130/1150/1150I)

yTerminal block adaptor (UPort 1130/1150/1150I)

y2 KV Optical Isolation Protection (UPort 1150I only)

Product Specifications

USB

Version USB 1.1 (also compatible with USB 1.0 and 2.0)

Connector USB type B

Speed 12 Mbps

Serial Interface

No. of Ports 1

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422 TxD+(B), TxD-(A), RxD+(B), RxD-(A),GND

RS-485 4-wire: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND 2-wire:

Data+(B), Data-(A), GND

RS-485 Data Direction

Control: ADDC™ (Automatic Data Direction Control)

Connector Male DB9

FIFO 64 bytes

Serial line protection 15 KV ESD for all signals

Serial Communication Parameters

Parity None, Even, Odd, Space, Mark

Data bits 5, 6, 7, 8

Stop bits 1, 1.5, 2

Flow control UPort 1130: XON/XOFF

UPort 1110/1150/1150I: RTS/CTS, XON/XOFF

Speed 50 bps to 921.6 Kbps

Power Requirements

Power Consumption

UPort 1110: 30mA@5VDC

UPort 1130: 90mA@5VDC

UPort 1150: 77mA@5VDC

UPort 1150I: 260mA@5VDC

Mechanical

Dimensions UPort 1110/1130/1150: 37.5 x 20.5 x 60 mm (L x W x H)

UPort 1150I: 52 x 80 x 22 mm (L x W x H)

1-3

UPort 1100 Series User’s Manual Introduction

Material UPort 1110/1130/1150: ABS + PC

UPort 1150I: Metal

Gross Weight UPort 1110/1130/1150: 60 g (0.13 lb)

UPort 1150I: 80 g (0.17 lb)

Environmental

Operating Temperature 0°C to 55°C (32°F to 131°F)

Storage Temperature -20°C to 70°C (-4°F to 185°F)

Operating Humidity 5% RH to 95% RH

Regulatory Approvals

EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, IEC

61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC

61000-4-8, IEC 61000-4-11, FCC Part 15 Class B

Warranty

5 years

1-4

UPort 1100 Series User’s Manual Introduction

LED Indicators

Active

RxD

TxD

1110

USB-to-Serial Adaptor

Active

RxD

TxD

1130

USB-to-Serial Adaptor

Active

RxD

TxD

1150

USB-to-Serial Adaptor

RS-232/422/485

UPort 1110 UPort 1130 UPort 1150 UPort 1150 I

UPort 1110/1130/1150 LED description:

Name Color Description

Active Red

This LED indicates normal operation.

Steady: The UPort is operational.

Off: Fault condition exists. There may be a problem with the converter,

the driver installation, or PC configuration.

TxD Green Blinking: Serial device is transmitting data.

RxD Yellow Blinking: Serial device is receiving data.

UPort 1150I LED description:

Name Color Description

Active Red

Steady: The UPort is operational.

Off: Fault condition exists. There may be a problem with the converter,

the driver installation, or PC configuration.

TxD Green Blinking: Serial device is transmitting data.

RxD Yellow Blinking: Serial device is receiving data.

DTR, DSR,

RTS, CTS,

DCD Red Steady: Require these signals to operate.

Off: Disable these signals to operate.

1-5

UPort 1100 Series User’s Manual Introduction

150 KX

ON DIP

Adjustable Pull High/low, Terminator Resistors for the RS-485 Port

In some critical environments, you may need to add termination resistors to prevent the reflection

of serial signals. When using termination resistors, it is important to set the pull high/low resistors

correctly so that the electrical signal is not corrupted. The UPort uses DIP switches to set the pull

high/low resistor values for each serial port.

To set the pull high/low resistors to 150 KΩ, make sure both of the assigned DIP switches are in

the OFF position.

To set the pull high/low resistors to 1 KΩ, make sure both of the assigned DIP switches are in

the ON position. This is the default setting.

1 2 3

SW Pull High Pull Low Terminator

ON 1KΩ1KΩ120 Ω

OFF 150 KΩ150 KΩDisable

1-6

Chapter 2 Installation and Configuration

Installation of the converter is a simple process. First install the driver, then plug the converter into

a USB port. When the converter is plugged in, Windows will load the correct drivers for the

converter and the new COM port. In this chapter, basic installation and configuration procedures

are explained. Although the installation screens will be for Windows 2000, the procedures are

essentially the same for Windows 98 and later versions.

The following topics are covered in this chapter:

Initial Driver Installation

¾Hardware Installation

¾Windows 98/ME and Windows 2000

¾Windows XP, Windows 2003, and Windows Vista (32-bit and 64-bit)

¾Configuring the COM Port

¾Configuring the Converter

¾Removing the Converter

¾Uninstalling the Driver

Install Linux Driver

¾Linux Kernel 2.4.20 and above

¾Linux Kernel 2.6.x

Installing the Windows CE Driver

¾Installation with an installation package for Win CE 6.0

¾Installation with an installation package for Win CE 5.0

¾Removing the Moxa WinCE 5.0 / CE 6.0 Driver

¾Installation with a CAB File

¾Removing the Moxa WinCE 5.0 / CE 6.0 Driver

Andere Handbücher für UPORT 1100 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies TCF-141-S Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 354 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MIINEPORT E1 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-M-SC-RM Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort DE-311 Handbuch

Moxa Technologies

Moxa Technologies VPort D351 Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-21GA-T Handbuch

Moxa Technologies

Moxa Technologies NPort 5410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCC-120 Handbuch

Moxa Technologies

Moxa Technologies TCF-142-RM Series Handbuch

Moxa Technologies

Moxa Technologies NPort 5110A Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCC-100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1200 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 2141 Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101 Series Handbuch

Moxa Technologies

Moxa Technologies VPort 354 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME61 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-S Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-M-ST Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1150 series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung