NordicTrack GX 4.1 Bedienungsanleitung

CAUT ON

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

Serial Number Decal

(under frame)

Model No. NTEVEX74911.0

Serial No.

Write the serial number in the

space above for reference.

USER'S MANUAL

www.iconeurope.com

QUEST ONS?

If you have questions, or if there are

missing parts, please contact us:

Call: 08457 089 009

From reland: 053 92 36102

Website: www.iconsupport.eu

E-mail: [email protected]

Write:

CON Health & Fitness, Ltd.

c/o H Group PLC

Express Way

Whitwood, West Yorkshire

WF10 5QJ

AUSTRAL A

Call: 1-800-237-173

E-mail:

[email protected]

WARN NG DECAL PLACEMENT

This drawing shows the location(s) of the warning

decal(s). f a decal is missing or illegible, see the

front cover of this manual and request a free

replacement decal. Apply the decal in the location

shown. Note: The decal(s) may not be shown at

actual size.

TABLE OF CONTENTS

WARNINGDECALPLACEMENT ..............................................................2

IMPORTANTPRECAUTIONS ................................................................3

BEFOREYOUBEGIN ......................................................................4

PARTIDENTIFICATIONCHART ..............................................................5

ASSEMBLY ...............................................................................6

HOWTOUSETHEHEARTRATEMONITOR ...................................................11

HOWTOUSETHEEXERCISEBI E .........................................................12

MAINTENANCEANDTROUBLESHOOTING ...................................................21

EXERCISEGUIDELINES ...................................................................23

PARTLIST ..............................................................................25

EXPLODEDDRAWING ....................................................................27

ORDERINGREPLACEMENTPARTS ..................................................BackCover

RECYCLINGINFORMATION.........................................................BackCover

NORDICTRAC is a registered trademark of ICON IP, Inc.

This product should

always be used on a

level surface.

This product is not

intended for

therapeutic use.

Misuse of this machine

may result in serious

injury.

Read user’s manual

prior to use and follow

all warnings and

instructions.

Do not allow children

on or around machine.

User weight must not

exceed 275 pounds.

Replace label if

damaged, illegible,

or removed.

WARN NG: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your exercise bike before using your exercise bike.

CON assumes no responsibility for personal injury or property damage sustained by or through the

use of this product.

1. Before beginning any exercise program,

consult your physician. This is especially

important for persons over age 35 or per-

sons with pre-existing health problems.

2. Use the exercise bike only as described in

this manual.

3. t is the responsibility of the owner to ensure

that all users of the exercise bike are ade-

quately informed of all precautions.

4. The exercise bike is intended for home use

only. Do not use the exercise bike in a com-

mercial, rental, or institutional setting.

5. Keep the exercise bike indoors, away from

moisture and dust. Do not put the exercise

bike in a garage or covered patio, or near

water.

6. Place the exercise bike on a level surface

with at least 2 ft. (0.6 m) of clearance around

the exercise bike. To protect the floor or

carpet from damage, place a mat under the

exercise bike.

7. nspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

8. Keep children under age 12 and pets away

from the exercise bike at all times.

9. Wear appropriate clothes while exercising;

do not wear loose clothes that could become

caught on the exercise bike. Always wear

athletic shoes for foot protection.

10. The exercise bike should not be used by

persons weighing more than 275 lbs.

(125 kg).

11. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

12. Always keep your back straight while using

the exercise bike; do not arch your back.

13. Over exercising may result in serious injury

or death. f you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

MPORTANT PRECAUT ONS

Handgrip Pulse Sensor

Seat

Seat Post

Seat Adjustment nob

Leveling Foot

Leveling nob

Wheel

Pedal/Strap

Console

Handlebar

Seat Post nob

Adjustment nob

BEFORE YOU BEG N

Thank you for selecting the revolutionary

NORDICTRAC ®GX 4.1 exercise bike. Cycling is an

effective exercise for increasing cardiovascular fitness,

building endurance, and toning the body. The GX 4.1

exercise bike provides an impressive selection of fea-

tures designed to make your workouts at home more

effective and enjoyable.

For your benefit, read this manual carefully before

you use the exercise bike. If you have questions

after reading this manual, please see the front cover

of this manual. To help us assist you, note the product

model number and serial number before contacting

us. The model number and the location of the serial

number decal are shown on the front cover of this

manual.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Length: 3 ft. 5 in. (104 cm)

Width: 1 ft. 11 in. (58 cm)

Weight: 82 lbs. (37 kg)

PART DENT F CAT ON CHART

See the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following

the key number is the quantity needed for assembly. Note: f a part is not in the hardware kit, check to see if

it has been preassembled. To avoid damaging parts, do not use power tools for assembly.

M4 x 16mm

Screw (90)–6

M10 x 95mm Patch

Screw (76)–4

M8 x 20mm

Patch Screw

(74)–4

M8 Split

Washer (75)–8

M8 Washer

(43)–2

M8 Locknut

(72)–4

M6 x 60mm Bolt Set (51)–1

M6 x 70mm Bolt Set (50)–1

M4 x 22mm

Screw (94)–2

M4 x 5mm

Patch Screw

(91)–1

ASSEMBLY

• Assembly requires two persons.

•Place all parts in a cleared area and remove

the packing materials. Do not dispose of the

packing materials until you complete all

assembly steps.

• To identify small parts, see page 5.

• n addition to the included tool(s), assembly

requires the following tools:

one adjustable wrench

one Phillips screwdriver

Assembly may be easier if you have a socket set

or a set of ratchet wrenches. To avoid damaging

parts, do not use power tools.

1. Attach the Rear Stabilizer (3) to the Frame (1)

with two M10 x 95mm Patch Screws (76).

2. Attach the Front Stabilizer (2) to the Frame (1)

with two M10 x 95mm Patch Screws (76).

Adjustment

Holes

127

3. Loosen the Adjustment nob (27) in the Frame

(1) a few turns.

Orient the Seat Post (6) as shown. Then, pull

the Adjustment nob (27) outward and insert

the Seat Post into the Frame (1).

Slide the Seat Post (6) upward or downward to

the desired position, and release the Adjustment

nob (27).

Move the Seat Post (6) upward or downward

slightly to make sure that the Adjustment

Knob (27) is engaged in one of the adjust-

ment holes in the Seat Post. Then, tighten the

Adjustment nob.

91 6

4. Orient the Seat (23) and the Seat Carriage (24)

as shown.

Attach the Seat (23) to the Seat Carriage (24)

with four M8 Locknuts (72) and four M8 Split

Washers (75).

Slide the Seat Carriage (24) onto the Seat Post

(6). Then, slide the Seat Carriage all the way

forward and tighten the Seat Adjustment nob

(26).

Attach an M4 x 5mm Patch Screw (91) to the

rear of the Seat Post (6).

5. Apply some of the included grease to an M6 x

70mm Bolt Set (50).

Orient the Handlebar (5) and the Upright (4) as

shown.

While a second person holds the Handlebar (5)

near the Upright (4), insert the Extension Wire

(59) upward through the Handlebar.

Tip: Avoid pinching the Extension Wire (59).

Attach the Handlebar (5) to the Upright (4) with

the M6 x 70mm Bolt Set (50) and two M8

Washers (43).

Then, attach an M6 x 60mm Bolt Set (51)

through the lower bracket on the Handlebar (5).

Grease

Avoid pinching the

Extension Wire (59)

6. While another person holds the Console (13)

near the Handlebar (5), insert the long receiver

wire (A) on the Console through the Handlebar

as shown.

Then, connect the other wires on the Console

(13) to the Extension Wire (59) and to the Pulse

Wire (61).

Tip: Avoid pinching the wires. Attach the

Console (13) to the Handlebar (5) with four M4

x 16mm Screws (90).

Avoid pinching

the wires

7. Orient the Upright (4) assembly and the Pivot

Cover (12) as shown.

Slide the Pivot Cover (12) upward to the

Handlebar (5). Tip: Bend and flex the Pivot

Cover slightly to slide it over the Handlebar.

Avoid pinching the wires.

Connect the long receiver wire (A) to the

Receiver Wire (B).

Tip: Avoid pinching the wires. Attach the

Pivot Cover (12) to the Handlebar (5) with two

M4 x 16mm Screws (90) and two M4 x 22mm

Screws (94).

Pivot the Handlebar (5) until the hole in the

Handlebar is aligned with an adjustment hole in

the Upright (4).

Tighten an Adjustment nob (27) into the

Handlebar (5) and an adjustment hole in the

Upright (4). Make sure that the Adjustment

Knob is engaged in one of the adjustment

holes.

Hole

Adjustment

Holes

8. Slide the Front Shield Cover (7) upward onto

the Upright (4).

While another person holds the Upright (4) near

the Frame (1), connect the Extension Wire (59)

to the Main Wire (58).

Insert the Upright (4) into the Frame (1).

Tip: Avoid pinching the wires. Attach the

Upright (4) with four M8 x 20mm Patch Screws

(74) and four M8 Split Washers (75).

Slide the Front Shield Cover (7) downward to

the Frame (1) and press it into place.

Avoid pinching

the wires

9. Identify the Right Pedal (21), which is marked

with an “R.”

Using an adjustable wrench, firmly tighten the

Right Pedal (21) clockwise into the Right

Crank Arm (19).

Tighten the Left Pedal (not shown) counter-

clockwise into the Left Crank Arm (not shown).

Adjust the strap on the Right Pedal (21) to the

desired position, and press the ends of the

straps onto the tabs on the Right Pedal. Adjust

the strap on the Left Pedal (not shown) in

the same way.

Strap

Tab

10. Plug the Power Adapter (67) into the receptacle

on the frame of the exercise bike.

If necessary, plug the Power Adapter (67) into

the Plug Adapter (98).

To plug the Power Adapter (67) into an outlet,

see HOW TO PLUG IN THE POWER

ADAPTER on page 12.

11. Make sure that all parts are properly tightened before you use the exercise bike. Note: Some hard-

ware may be left over after assembly is completed. Place a mat under the exercise bike to protect the

floor or carpet.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NordicTrack Heimtrainer Handbücher

NordicTrack

NordicTrack NTCCEX04900 Bedienungsanleitung

NordicTrack

NordicTrack NTC69020 Bedienungsanleitung

NordicTrack

NordicTrack VU19 Bedienungsanleitung

NordicTrack

NordicTrack Gx 7.0 Pro Bike Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.0 Gw Bike null

NordicTrack

NordicTrack Gx 3.1 Bike null

NordicTrack

NordicTrack STUDIO BIKE Bedienungsanleitung

NordicTrack

NordicTrack 831.21914.0 Bedienungsanleitung

NordicTrack

NordicTrack Gx 5.5 Sport Bike Bedienungsanleitung

NordicTrack

NordicTrack SL 705 NTC05940 Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.0 Gw Bike Bedienungsanleitung

NordicTrack

NordicTrack NTEVEX76017.0 Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.1 Bike Bedienungsanleitung

NordicTrack

NordicTrack NTIVEX79414.0 Bedienungsanleitung

NordicTrack

NordicTrack Gx4.1 Bike Bedienungsanleitung

NordicTrack

NordicTrack SL 800 Benutzerhandbuch

NordicTrack

NordicTrack AudioStrider R400 NTEX4196.1 Bedienungsanleitung

NordicTrack

NordicTrack Gx 4.5 Bike Bedienungsanleitung

NordicTrack

NordicTrack Gx2 Sport Bike Bedienungsanleitung

NordicTrack

NordicTrack Gx4.1 Bike null

NordicTrack

NordicTrack SL 800 Kurzanleitung

NordicTrack

NordicTrack C7 Zl Bike Bedienungsanleitung

NordicTrack

NordicTrack SL 710 Bedienungsanleitung

NordicTrack

NordicTrack GX 4.5 NTEX03912.0 Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung

KIDSFIT

KIDSFIT Cardio Kids 661 Bedienungsanleitung