CrimeStopper CoolStart RS-1604TW1 Bedienungsanleitung

RS-1604TW1/RS-1704TW2/RS-1804FM

RS1905FM

2-Way Paging Remote Engine Starting & Keyless

Entry System with 1-Way Sidekick Remote Control

OPERATING INSTRUCTIONS

-PRIMARY: Thesearefeaturesthatmustbeconnectedinorderforthesystemtooperateproperlyi.e.Remote

Startconnections,Flashinglights,BrakeReset. Forprogramming,thehoodpinandprogrambuttonarerequired.

-OPTIONAL: These are features are to be connected only if desired or agreed upon by the customer and the

installingdealeri.e.DoorLocks,TrunkPop,DomeLightIllumination,Horn-Honk, Anti-Grind,etc. Thesefeatures

may also require additional parts and/or labor fees. Consult with your installer beforehand to be sure of what is

going to be installed with your particular system.

TECHNICALSUPPORT:(800)998-6880

Monday -Friday8:00am -4:30pmPacificStd.Time

WebSite:www.crimestopper.com

E-mail:[email protected]

CRIMESTOPPERSECURITYPRODUCTS,INC.

1770S.TAPOSTREET,SIMIVALLEY,CA.93063

REV C–09.30.2005

This device complies with FCC Rules part 15. Operation is

subject to the following two conditions: 1) This device may not

cause interference, and (2) this device must accept any

interference that may

be received, including interference that

may cause undesired operation. The manufacturer is not

responsible for any radio or TV interference caused by

unauthorized modification to this equipment. Such modification

could void the user's authority to operate the equipment.

TABLE OF CONTENTS

OperationCautions&Warnings….………………..….…………………………………….…………………...………2

2-WayPagingLEDRemote TW1.........…………………………………………………………….…………..……….3

2-WayPagingLCDRemoteTW2..……………………………………………………………………………...……….4

2-WayPagingLCDRemoteFM…..……..……………………………………………………………………...…...…..5

Usingthe Remote 1-WayRemote………………………………………………………………………………….….6-7

RemoteEngineStarting…………………………………………………………………………………………...…..8-11

TurboTimerMode……………………………….……………………………………...………………………….….…12

ConvenienceandSafetyFeatures…….……………………….………………..………………………..….....….13-14

TransmitterProgramming….…………….………………………………………….……………….…..…….…......…15

2Vehicle Operation.………………………………….………………...……………………..………...……..…...……16

Troubleshooting“BeforeYouCall”………….…………..………………………………………….………….…...17-18

LowBatteryWarningandreplacingthe AAA batteryonLCDRemote…………………………………………….19

SettingtheClock…………………………………………………………………………………...………...…BackPage

OPERATION CAUTIONS & WARNINGS

CRIMESTOPPERSECURITYPRODUCTS,INC.andits VENDORSshallnotbeliableforanyaccidentresulting

fromtheuseofthisequipment.Thissystemisdesignedtobeprofessionallyinstalledintoacarorvehicleinwhich

allitems,suchasparkingbrakeandallassociatedcomponents,doorswitches,transmissionshiftlinkage,throttle

linkage,andallenginesafetyfeatures,areinperfectworkingcondition.

DO NOTinstallthe Remote EngineStartingSystemonMANUAL TRANSMISSION vehicles. If accidentally left

ingearthevehiclecouldbecomeaself-propelledthreatto lifeandproperty.

ITISABSOLUTELYTHEOWNER’SSOLERESPONSIBILITYTO:A)Understandtheoperationofthissystem

anditssafetyfeatures.B)Checkforproperoperationofthesystempriortoacceptingdeliveryofthevehiclefrom

theinstallationfacility. C) Check andmaintaintheconditionofthevehicleandall itemsrelativetotheproper

operationofthissystemanditssafetyfeatures. D)Alwaysleavethedoorsandwindowsclosedandlockedto

protectagainstaccidentandtheft.

DO NOT remote startthevehiclein a closed garage. Make sure that the garage door is open or there is

adequateventilation.Failuretoobservethisrulecouldresultininjury or death from poisonous Carbon Monoxide

fumes.

2-WAY PAGING LED REMOTE RS-1604TW1

TWO-WAYPAGEROPERATION&PAGETONES:

FEATURE BUTTON ACTION BEEPS LED/FLASH

LOCK #1(Lock) Press&Release 1X then 1X again Orange/ 1X

UNLOCK #2(Unlock)

Press&Release 1X then 2X again Green/ 2X

AUX#1 #3 (Trunk) Press &Hold 2Sec. 1Xthen 3X again Yellow / 1X

REMOTESTART #4 (Start) Press& Hold 2Sec. 1Xthen 3X again Blue /3X

ENGINERUNNING 6XBlue /6X

TURNOFF ENGINE

#4 (Start) Press& Hold2Sec. 1XNo Page back

PANIC #1(Lock) Press& Hold3Sec. 1X then 2X/12X Orange12X/Green1X

UNLOCKLOCK

PAGING

LED's

REMOTE

ANTENNA

FIXED

TRUNK

#1 #2

#3 #4

POP START

CAR2

OPERATION:

BUTTON 1 (Lock Symbol):

•Press and release to Lock doors.

•Press and Hold for more than 3 seconds to activate

“Panic” feature.

BUTTON 2 (Unlock Symbol):

•Press and release to Unlock doors.

BUTTON 3 (Trunk Symbol):

•Press andHold for two seconds to activate trunk pop

(Optional Feature).

BUTTON 4 (Start):

•Press and Hold for two seconds to Start/StopEngine

BUTTON 5 (Side button)

§Press and Release to show the previous status.

§Press and Hold for 5 second to switch to vehicle #2.

#2 UNLOCK

LCD

SCREEN

#4 ENGINE

START/STOP

#1 LOCK

#3 TRUNK

#5 RECALL

CAR I or II

FIXED

ANTENNA

OPERATION:

BUTTON 1 (LOCK Symbol):

•Press and release to Lock doors.

•Press and Hold for more than 3 seconds to activate “Panic”

feature.

BUTTON 2 (Unlock Symbol):

•Press and release to Unlock doors.

BUTTON 3 (Trunk Symbol):

•Press and Hold two seconds to activate trunk pop (Op

tional

Feature).

BUTTON 4 (Start Key Symbol):

•Press and Hold two seconds to Start/Stop engine.

BUTTON5 (On side of remote):

•Press and release to light up the LCD screen.

•

Press and release twice to recall the last message from the

LCD screen.

•Press and Hol

d two seconds to change from Car 1 to Car 2

•Press 5 times to change the time and

enable/disable beep

tones from the remote.

LOCK

UNLOCK

TRUNKPOP

REMOTE

START

LOWBATTERY

PANIC

2-WAY PAGING LCD REMOTE RS-1704TW2

2-WAY PAGING LCD REMOTE RS-1804FM/1905FM

#1 ARM/

LOCK #4 ENGINE

START/STOP

RECALL /

CAR I OR II

#3 TRUNK

POP

#2 DISARM/

UNLOCK

ANTENNA

START

FIXED

LCD

SCREEN

IGN

(<<<< MOVING <<<<<)

LOCK UnLock Trunk Pop ConfirmRemote SuccessfulStart

StartRequest

OPERATION:

BUTTON 1 (Lock Symbol):

•Press and release to Lock system.

Press and Hold for more than 3 seconds to activate

“Panic” feature.

BUTTON 2 (Unlock Symbol):

•Press and release to Unlock system.

BUTTON 3 (Trunk Symbol):

•Press and Release to activate trunk pop (Optional

Feature).

BUTTON 4 (Start Symbol):

•Press and release to Start/Stop Engine.

BUTTON 5 (On Side of Remote)

•Press and release to recall the last

message from the

LCD screen.

•Press and Hold 5 seconds to change from Car 1 to Car 2.

•Press 5 times to enable/disable beep tones from the

remote.

USING THE 1-WAY REMOTE

The transmitter supplied with the CoolStart system contains four buttons, flashlight, and vehicle 2 switch. The

button configuration of the CoolStart system is Factory-set and unchangeable. See Page 16for additional

information on how to use your remote to operate a secondvehicle equippedwith a CoolStartsystem.

NOTE:BUTTON#4 and#3 RemoteStart/Trunk

There is a deliberate delay or 2 presses (Optional) built into the system on button #4 and #3 to help prevent

accidentalremotestartingfromtheremotebeinginyourpocketorpurse. Duringnormaluse,ifyoupressbutton

#4 or #3 too quickly, the system may not start the engine or open trunk.

OPERATION:

BUTTON 1 (Lock Symbol):

•Press and release to Lock doors.

•Press and Hold for more than 3 seconds to

activate “Panic” feature.

BUTTON 2 (Unlock Symbol):

•Press and release to Unlock doors.

BUTTON 3 (Trunk Symbol):

•Press andHold for two seconds to activate

trunk pop (Optional Feature).

BUTTON 4 (Start):

•Press and Hold for two seconds to Start/Stop

Engine

BUTTON 5 (Side button)

§Press and Release to show the previous

status.

§Press and Hold for 5 second to switch to

vehicle #2.

COOLSTART

LOCK

TRUNK

REMOTE

UNLOCK

VEHICLE 2

FLASHLIGHT

START

Replacement Battery

GP23A

(12volt)

USING THE 1-WAY REMOTE RS-1905FM

START

LOCK

UNLOCK

REMOTE

2NDVEHICLE

TRUNK

(AUX#3)

(AUX#2)

(AUX#4)

STARTER #5

COOL START

The transmitter supplied with the RS-1804FM/1905FM systemhas five buttons. The button configuration of the

RS-1804FM/1905FMisFactory-setandunchangeable. See Page 16for additional information on how to use your

remotetooperatea secondvehicleequippedwitha CoolStartsystem.

NOTE:BUTTON#4 and#3 RemoteStart/Trunk

There is a deliberate delay or 2 presses (Optional) built into the system on button #4 and #3 to help prevent

accidentalremotestartingfromtheremotebeinginyourpocketorpurse. Duringnormaluse,ifyoupressbutton

#4 or #3 too quickly, the system may not start the engine or open trunk.

Replacement Battery

GP23A (12volt)

OPERATION:

BUTTON 1 (Lock Symbol):

•Press and release to Lock doors.

•Press and Hold for more than 3 seconds to activate

“Panic” feature.

BUTTON 2 (Unlock Symbol):

•Press and release to Unlock doors.

•Press 2 times for Driver Door Priority Unlock.

BUTTON 3 (Trunk Symbol):

•Press andHold for ½ second or press twice to

activate trunk pop.

BUTTON 4 (Start):

•Press and Hold for ½ second or press twice to

Start/Stop Engine.

BUTTON 5 (Vehicle #2/ AUX#2/AUX#3/AUX#4)

§AUX #2: Press button 5 then press button 1.

§AUX #3: Press button 5 then press button 2.

§AUX #4: Press button 5 then press button 3.

§vehicle #2.

§Press and Hold for 2 sec. for vehicle #2.

REMOTE ENGINE STARTING

REMOTEENGINESTARTING -SUCCESSFULSTART:

1) Press the remote start button for at least 1/2 second (Default) ortwice ifsetfordoublepress.

2) Parking lights flash once; return solid,and the Ignition/Acc circuits turn on.

3) After a few seconds the Starter Motor engages, Parking lights and Acc circuits will turn off while cranking.

4) Engine Starts and Runs. Parking Lights and Acc turn back on, Doors Lock.

5) Enginewill remain runningforprogrammedruntimeuntilresetwithBrakepedal. Ifneeded,theenginecanbe

turnedoff with remotetransmitter by pressingand releasing ordoublepress the Start button.

AFTER

IGN

STARTER

THEN

FLASH 1X

SOLID

SEC.

THE REMOTE STARTER BUTTON IS PROGRAMMABLE FOR 1 OR 2 PRESSES

REMOTEENGINESTARTING -UNSUCCESSFULSTART

Intheeventthattheenginedoesnotstartonthefirstattempt,thesystemshutsdownforafewseconds,and then

attemptstorestarttheenginea2nd and3 rd time. For hardstartingengines,theunitwillallowastartercrank time of

up to 10 secondsmaximum. This should provide ample cranking time for difficult starts, but is limited to 13

seconds to help prevent damage to the starter from over cranking.

1) Ifengine starts on2nd or 3rd attempt,seesteps4&5aboveof"SuccessfulStart".

2) IfThird attempt fails to start engine, the system will turn off and doors will remain locked.

NOFURTHERATTEMPTSWILLBEMADEAUTOMATICALLY

TURNINGOFFAREMOTESTARTEDENGINE:

1) Engine is running in Remote Start (Parking lights ON).

2) Pressand release theremote start button.

3) Engine& parking lightsOFF, Doors re-lock/re-arm.

REMOTE ENGINE STARTING Cont.

ENTERINGYOURREMOTESTARTEDVEHICLE:

1) Withengine running, RemoteUnlock system (Ifequipped) or opendoor with key.

2) Enter vehicle and be careful not to step on brakepedal! (RemoteStartReset).

3) Turn Ignition to ON/RUN position, then press brake pedal to reset the Remote Starter & Shift out of park.

4) Remotestarter will resetinstantly when thebrake is pressed. Parkinglights will turnoff and theignition key is

nowcontrolling your vehicle.

REMOTESTART RUNTIMERESET:

You can now reset the engine-run timer to allow for more running time after remote start has already occurred

usingthe remote control. Afterasuccessfulremotestart, pressboththeLock& Unlock buttons together for at

least 2 seconds. The parking lights will flash 3 times and internal enginetimerwill resetback to zero minutes.

IDLEDOWNMODE:

This mode allows the unit to take over operation of the parked vehicle while the ignition key is removedandyou

exitthevehicle. Thevehicleisputintoaremoterunningconditionbeforeyouexitanditwillremainrunningforthe

programmed run time or until you come back.

Examples:

•You pull up to a convenience store for a quick stop, "Idle Down" mode keeps engine running when you exit the vehicle,

(with keys in hand) remote lock doors or arm alarm. When you return, unlock, turn ignition ON and drive away.

REMOTE ENGINE STARTING

IDLEDOWNMODE -EXITINGTHEVEHICLE:

1) Withvehicleenginerunningwithkey, **presstheRemoteStartbuttonforatleasta1/2 second ortwiceifsetfor

doublepress.

2) Parking Lights will turn ON.

3) Doors will unlock, or if brake pedal is being depressed, doors will unlock when it is released.

4) TurnOFF Ignition and remove key. Engine should remain running.

5) Exitvehicle,thenremotelockdoorsifdesired.

6) Engine will remain running for programmed run time or until you return (whichever comes first).

IGN

SOLID

OFF

UNLOCK

ENTERINGAVEHICLEDURING “IDLE-DOWN”or“INFINITYRUN”MODES:

1. With engine running in "IDLE DOWN" (parking lights ON), unlock door via remote or key.

2. Entervehicle and becareful not tostep on brakepedal! (Remote StartReset)

3. TurnIgnitiontoON/RUNposition,thendepressbrakepedaltoresettheRemote Starter.Parkinglightswill

turnoff indicating the Remote Start is OFF and Vehicle is running by the Key. Drive away as normal

INFINITYRUNMODE

Thismodecanonlybeactivated when"IdleDown" procedure. The Infinity Runmodeallowsthevehicleengineto

remain running INDEFINITELYaftertheprogrammedruntimeelapses. Thismodewillallowthevehicletobeleft

running and unattendedwithout theignitionkeyintheswitchpreventingthevehiclefrombeingstolen. Thismode

canbebeneficialtolawenforcementorcommercialtrucksthatneedtoremainrunningunattendedforlongperiods

oftime. See nextpageforInfinitymodesteps.

**Programmablefor½secondpressordoublepress.Thisoptionisselectablebyyourinstaller.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CrimeStopper Autoalarmanlage Handbücher

CrimeStopper

CrimeStopper HP-9225MX Kurzanleitung

CrimeStopper

CrimeStopper CS-2011RS Series III Super Rage Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8700 Bedienungsanleitung

CrimeStopper

CrimeStopper SuperPage III CS-2006FM Montageanleitung

CrimeStopper

CrimeStopper CS-2003DC II Series Handbuch

CrimeStopper

CrimeStopper Super Rage CS-2012TW1 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-882 OEM Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2011RS.III Bedienungsanleitung

CrimeStopper

CrimeStopper CS-9206SE Handbuch

CrimeStopper

CrimeStopper The Informer II CS-2016FM Bedienungsanleitung

CrimeStopper

CrimeStopper HP-9235MX Kurzanleitung

CrimeStopper

CrimeStopper Fortress FS-20 Bedienungsanleitung

CrimeStopper

CrimeStopper RS-300 Bedienungsanleitung

CrimeStopper

CrimeStopper Traknet TN-4011 Stücklistenhandbuch

CrimeStopper

CrimeStopper CS-2000DPII TW2 Bedienungsanleitung

CrimeStopper

CrimeStopper HP-8710 Kurzanleitung

CrimeStopper

CrimeStopper Gargoyle CS-2001FC II Series Handbuch

CrimeStopper

CrimeStopper CS-2004 WDC Bedienungsanleitung

CrimeStopper

CrimeStopper Fortress FS-10 Handbuch

CrimeStopper

CrimeStopper SP-100 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-9600 Technisches Datenblatt

CrimeStopper

CrimeStopper CS-2205 Handbuch

CrimeStopper

CrimeStopper Fortress FS-30 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2011RS.II Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Clifford

Clifford Nova 3 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung

SECO-LARM

SECO-LARM 300C Bedienungsanleitung