Metra Electronics 99-8206 Bedienungsanleitung

METRA. THE WORLD’S BEST KITS.™

APPLICATIONS

1-800-221-0932 metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 99-8206

WIRING & ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness: • 70-1761 Toyota harness 1987-up

• TYTO-01 Toyota amp interface harness 2003-up

Antenna Adapter: • Not Required

Phillips Screwdriver • Socket Wrench • Cutting Tool

TOOLS REQUIRED

Toyota 4-Runner (Excluding Limited) 2003-2009

Toyota Highlander 2001-2007

99-8206

B CA

• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Highlander Brackets • E) 4-Runner Brackets

KIT FEATURES

KIT COMPONENTS

• DIN head unit provision with pocket

• ISO DIN head unit provision with pocket

Table of Contents

Dash Disassembly

– 2003-2009 Toyota 4 Runner (Excluding Limited) 3-4

– 2001-2007 Toyota Highlander 5

Kit Assembly

– Toyota 4-Runner bracket assembly 6

– Toyota Highlander bracket assembly 6

– DIN head unit provision 7

– ISO DIN head unit provision 8

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

99-8206

Caution

Metra recommends disconnecting the negative battery terminal before beginning any

installation. All accessories, switches, and especially air bag indicator lights must be

plugged in before reconnecting the battery or cycling the ignition.

*NOTE: Refer also to the instructions included with the aftermarket radio.

1. Unsnap and remove trim from around

shifter.

2. Unsnap and remove trim covers from

around center console pocket edge at

front and rear of console.

3. Unsnap and remove center console

cover. (Figure A)

4. Unsnap trim ring from around ignition

key cylinder.

5. Remove (1) 10 mm bolt from bottom

right of panel below steering column.

Unsnap panel and pull away to gain

access behind panel. (Figure B)

6. Remove (1) 10 mm bolt on bottom left

of center panel behind panel below

steering column. (Figure B)

Continued on next page

Toyota 4-Runner 2003-2009

(Excluding Limited)

Dash Disassembly 99-8206

(Figure A)

(Figure B)

Dash Disassembly 99-8206

7. Remove (1) 10 mm bolt beneath climate

control behind pocket door. Unsnap and

remove climate control. (Figure C)

8. Remove (2) 10 mm bolts beneath radio

behind climate controls.

9. Unsnap and remove entire center panel

around radio. (Figure D)

10.Remove (2) 10 mm bolts securing

radio to remove.

Continue to kit assembly (Figure C)

(Figure D)

Toyota 4-Runner 2003-2009

(Excluding Limited)

Dash Disassembly 99-8206

1. Pull and remove dash panel from radio

and climate controls. Tip: There are

8 clips. (Figure A)

2. Remove (6) 10 mm bolts from radio and

climate controls assembly. (Figure B)

3. Remove assembly and disconnect

the wiring.

4. Remove (8) Phillips bolts and (4) Phillips

screws to separate brackets from

assembly. (Figure C)

Continue to kit assembly

Toyota Highlander 2001-2007

(Figure A)

(Figure B)

(Figure C)

99-8206

Kit Preparation

(Figure A)

(Figure B)

1. Snap the appropriately marked

mounting brackets for your application

onto the sides of the radio housing.

The brackets are marked 4-Runner

or Highlander and left or right.

(Figure A - 4 RUNNER)

(Figure B - HIGHLANDER)

Kit Assembly 99-8206

DIN head unit provision with pocket

(Figure A)

(Figure B)

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Slide the DIN cage into the radio

housing and secure by bending the

metal locking tabs outward. (Figure A)

3. Snap the aftermarket radio into the

cage and secure. (Figure B)

4. Reassemble dash in reverse order

of disassembly.

Kit Assembly 99-8206

ISO DIN head unit provision with pocket

(Figure A)

(Figure B)

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Mount the ISO brackets to the head unit

with the screws supplied with the radio.

(Figure A)

3. Snap the radio into the radio housing

until the side clips engage. (Figure B)

4. Snap the ISO trim plate onto the radio/

housing assembly. (Figure B)

5. Reassemble dash in reverse order

of disassembly.

Notes

Andere Handbücher für 99-8206

Inhaltsverzeichnis

Andere Metra Electronics Autozubehör Handbücher

Metra Electronics

Metra Electronics 99-7352B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-5824CH Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7310 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7819 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8227S Bedienungsanleitung

Metra Electronics

Metra Electronics 99-6502 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8216 Bedienungsanleitung

Metra Electronics

Metra Electronics XIAH-FD2 Bedienungsanleitung

Metra Electronics

Metra Electronics 70-5511 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8201 Bedienungsanleitung

Metra Electronics

Metra Electronics Axxess CLASSII-100 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-6511 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-3304 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-6506 Bedienungsanleitung

Metra Electronics

Metra Electronics CHTO-01 Bedienungsanleitung

Metra Electronics

Metra Electronics 95-7376B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-5500 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-7339B Bedienungsanleitung

Metra Electronics

Metra Electronics 99-6525 Bedienungsanleitung

Metra Electronics

Metra Electronics 95-3302 Bedienungsanleitung

Metra Electronics

Metra Electronics 107-FD1B Bedienungsanleitung

Metra Electronics

Metra Electronics AHDH-HD2 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-9500 Bedienungsanleitung

Metra Electronics

Metra Electronics 95-9308B Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung