Oneida Air Systems Dust Deputy AXD000004 Bedienungsanleitung

1_09

The Original

U.S. Patent # 7,282,074

E.U. Patent Pending

Plastic Dust Deputy Owner’s Manual

Oneida Air Systems, Inc. was founded in 1993 to bring cost effective, state-of-the-art dust collection sys-

tems and material handling ductwork to woodworking shops. OAS designs and manufactures industrial

grade dust collection systems that create a practical, safe and healthy work place environment.

Captures 99% of the dust before it reaches your shop

vacuum. No ﬁlter clogging and no loss of suction.

1.800.732.4065 www.oneida-air.com

AXD000004

ZBM000027

(23773)

RTD10000668AB

Thank You for Choosing an Oneida Air Systems Product!

OAS manufactures and sells dust collection equipment only. Our qualiﬁed

technicians and sales staff are available 7:30am - 6:00pm EST Mon. -

Thurs. and 7:30am - 5:00pm EST Fri. to answer any questions concerning

OAS products and dust collection. Call for ductwork design and ductwork

quotes, including system pricing and shipping cost.

Read the entire Owner’s Manual before assembling or operating system!

II.

III.

IV.

VI.

VII.

VIII.

IX.

System Start-Up Information

Kit Contents

Dimensions

Assembly for Dust Deputy

Options for Securing the Dust Deputy to Shop Vacuum

More Options for Securing Dust Deputy to Vacuum

Accessories

Terms and Conditions

Troubleshooting

Adding Cyclones

Table of Contents Page

Oneida Air Systems, Inc. 1001 West Fayette St., Syracuse, NY 13204

Ph. - 1.800.732.4065 or 315.476.5151 / Fax: 315.476.5044

I. System Start-Up Information

Read the installation and maintenance instructions as well as the

recommended safety practices in this manual before assembling

and using the Dust Deputy.

Some dusts are highly ﬂammable or explosive. Learn / know

what you are dealing with. Follow all local, state, federal &

NFPA codes and guide lines.

Safety Instructions to be Strictly Followed.

Wood dust mixtures are highly ﬂammable and can be explosive.

NEVER introduce sparks or sources of ignition into collector.

1.) Use 10 gal. or smaller drum size.

2.) Dump drum after each use.

3.) Ground system. (See pg. 4)

The Dust Deputy is made from static dissipating plastic. See grounding

instructions.

Keep ﬁre extinguishers handy at all times.

NEVER leave wood dust in a building or vehicle.

Dust Deputy Owner’s Manual 2009

Do not vacuum, or use this Dust Deputy near ﬂammable or combus-

tible liquids, gases, or explosive dusts, such as gasoline or other fuels,

lighter ﬂuid, cleaners, oil-based paints, natural gas, hydrogen, coal dust,

magnesium dust, grain dust, aluminum dust, sugar dust, ﬂour dust or

gun powder.

Do not vacuum anything that is burning or smoking, such as cigarettes,

matches, or hot ashes.

To reduce the risk of health hazards from vapors or dusts, do not

vacuum toxic materials unless a HEPA ﬁlter is used. Do not use or store

near hazardous materials.

WARNING / SAFETY

II. Kit Contents

Plastic Dust Deputy w/ Plastic Drum - AXD000004

III. Dimensions

Inlet

for Tool

Hose

Outlet

to Shop

Vacuum

12”

29.25”

15.5”

- Drum Cyclone 11” Plastic (1) - VXC110002

- 5 Gal. Plastic Bucket (2) - SDS050001

- 5 Gal. Plastic Lid w/ Bolt & Center Holes (1) - SDX050001

- 2.5” x 4’ Hose (1) - AXD250048

- 3” Angle Ring (1) - DFZ030000

- Gasket for Cyclone (1) - AXG000000

- Foam Block 2” x 3” x 6” (1) - AFF030306

- 3.5” Carriage Bolt (2) - AFB025350

- 5/16” Fender Washer (4) - AFW170000

- 3/4” Hex Head Bolt (6) - AFS015920

- 1/4” Whiz Lock Nut (8) - AFT000005

- Washer Flat 1/4” (6) - AFW025000

Dust Deputy Owner’s Manual 2009

IV. Assembly Instructions for Dust Deputy

1.) Place supplied gasket on plastic

drum top, lining up holes in gasket with

holes in lid. 3.) Attach metal angle ring to

underside of lid and tighten bolts.

4.) Snap lid tightly on drum and

you’re ready to go.

5.) Attach provided hose from shop

vacuum to top outlet on cyclone (A).

Use shop vacuum hose to attach to

tools. (B).

2.) Place bolt through washer then put

bolt through hole in base of cyclone.

For optional grounding, attach wire to bolt

between bolt head and washer, then attach

another washer to end of wire. Wire must

be long enough for washer to lie ﬂat on ﬂoor.

Bolt

Wire

Washer

Cyclone

Gasket

Lid

Angle Ring

Floor

Base

Gasket

(Ring Terminal Recommended)

The Dust Deputy is made of static dissipating plastic.

Make sure larger

diameter hoses are

pushed up so they ﬁt

tightly over the inlet

V. Possible Ways to Attach Dust Deputy to Shop Vacuums

You may want to attach your Dust Deputy to

your shop vacuum for mobility, convenienc

or stability. There is no deﬁnitive way to

attach the Dust Deputy to a shop vacuum. It

will vary with vacuum type and intended us

These are just a few examples of possible

ways it may be done.

Some vacuums may only require one foam

block to attach the bucket. This may be

determined by vacuum body shape.

Cut the provided foam block in half. Drill two

1/4” holes through bucket, blocks and vacuum

as shown, then using provided long bolts,

washers and nuts, attach bucket to vac.

Cut the provided foam block to size. Drill two

1/4” holes through bucket, blocks and vacuum

as shown, then using provided long bolts,

washers and nuts, attach bucket to vac.

The mounting is only limited by your

imagination.

Use the foam blocks as spacers be-

tween the vac and bucket then put the

assembled Dust Deputy into the

attached bucket to hold it securely to

the vacuum. Attach the appropriate

hoses and you’re ready to go.

Use the foam block as upper spacer

between the vac and bucket then put

the assembled Dust Deputy into the

attached bucket to hold it securely to

the vacuum. Attach the appropriate

hoses and you’re ready to go.

To prevent tipping problems,

please see pg. 9 in this manual.

Dust Deputy Owner’s Manual 2009

VI. Other Options for Securing Dust Deputy to Vacuum

Strap to Vacuum

Velcro to Dolly

Weight in Bottom of Drum

Bolt to Attached Platform

Home-Built Cart

Bolt Bucket to Dolly

VII. Accessories

AXD000005 Dust Deputy Drum Dolly

Part # Description

Drum Dolly

Drum Dolly increases Deputy’s mobility. Velcro

straps hold drum securely for use, yet easily

releases for emptying.

Replacement HEPA Filters for Your Shop Vacuum

Replacement ﬁlters for your shop vacuum.Filters are easily cleaned by blowing from the

outside with compressed air.

HEPA ﬁlters 99.97% of test material from 0.3 microns.

Part # Description

FCH000001

FCH000002

FCH000003

Cleanstream HEPA Filter for Craftsman Wet/Dry Vacs.

Replaces Sears Filter 4-17816

Cleanstream HEPA Filter for Genie, Black & Decker

Wet/Dry Vacs

Cleanstream HEPA Filter for Rigid Wet/Dry Vacs

AXS000000

AXS000001

UltraClean Scraper

Extra Tungston Carbide Blade Set

Part # Description

UltraClean Scraper

*Hose not included.

AXD300000

AXD200000

AXD100000

VSHNZZ150

1.5” Hose / Cuffs 1.5” x 1.5”

1.25” Hose / Cuffs 1.25” &1.5”

1” Hose / Cuffs 1” & 1.5”

Coupler 1.5”

Part # Description

Hose Packages & Options

All hose is high quality, static dissipating, wire

reinforced.

All hoses have at least one 1.5” dia. cuff to attach

to cyclone inlet.

Fire Hazards and Codes

Warning! Explosion and ﬁre hazard! Never vacuum ﬂammable ﬂuids or gas, oil, alcohol, solvents, etc. Do not

operate near ﬂammable ﬂuids or gas. Never vacuum warm ﬂuids or materials at more than 140 deg. F (60 deg.

C), such as burning cigarettes, ashes, glowing coals, etc.

Warning! Do not vacuum hazardous / carcinogenic dust unless a HEPA ﬁlter is installed.

Always keep ﬁlter cartridge clean so the vacuum operates properly.

Empty Dust Deputy waste can frequently. Never leave ﬂammable material in your Dust Deputy or shop vacuum.

Returned Goods Policy

Buyer must inform O.A.S. of any shortage or damage, by so noting in writing, on the freight delivery bill prior

to signing to indicate receipt of shipment. All claims, including claims covered under the limited warranty, are

subject to inspection and investigation by O.A.S. O.A.S. reserves the right to inspect, investigate all returned

products before Buyer’s claim is settled. All products returned for a cash refund must be unused, resaleable

and purchased within 30 days. There are no refunds on ﬂex hose, custom made components or partial kit

items. Kits must be returned in full (all components) for credit. There will be a 25% restocking fee applied to

any returned items. Buyer must call and get an RMA (Return Authorization Number). Merchandise must

be shipped to us prepaid.

Limited Warranty

Oneida Air Systems warrants products it manufactures for a period of 90 days to the original purchaser from

the date of purchase. Items not manufactured by O.A.S. are limited to their own manufacturer’s warranties.

This warranty does not apply to defects directly or indirectly to misuse, negligence, accidents, abuse, repairs,

or alterations or lack of maintenance. This is Oneida Air Systems sole written warranty and any warranties that

may be implied by law, including any merchantability or ﬁtness, for any particular purpose, are hereby limited to

the duration of this written warranty. O.A.S. does not warrant or represent that the merchandise complies with

the provisions of any law or acts unless the manufacturer so warrants. In no event shall O.A.S.’s liability under

this warranty exceed the purchase price paid for the product and any legal actions brought against Oneida Air

Systems shall be tried in the State of New York, County of Onondaga.

Oneida Air Systems shall in no event be liable for death, injuries to persons or property or for incidental, contin-

gent, special, or consequential damages arising from the use of our product.

Oneida Air Systems does not warrant or authorize use of wood dust collectors for other purposes. This includes

wood products that are treated, coated, or otherwise altered from their natural state.

VIII. Terms & Conditions

Dust Deputy Owner’s Manual 2009

IX. Troubleshooting

To Prevent Tipping Problems

To Prevent Hose Pull Off

Dust Deputy not separating well. (Only a tiny amount of dust should

reach the vacuum.)

Position one of the vac wheels directly under the

5 gal. pail to increase the center of gravity.

Wrap the inlet and outlet of the DD with a layer of electrical tape to

increase the friction ﬁt.

Secure with a hose clamp.

Secure with a sheet metal screw.

Position a weight (eg. brick) on the opposite side

of the vac from the 5 gal. pail to counter-balance

the pail.

Attach the 5 gal. pail to the vacuum and add a

caster to the bottom of the pail for support and

mobility..

Low air volume.

Material swirls in cyclone and won’t drop down into drum.

Air leak. Check cyclone ﬂange / drum lid / barrel. Even small leaks

will affect performance.

Vacuum ﬁlter clogged. Blockage in hose.

Air leak in bottom of cyclone / drum lid or dust drum.

Large, bulkier material might swirl. Restart or temporarily cut off air

ﬂow to drop material down.

Some models of vacs with a short wheel base can become sligthly

unstable with the addition of a 5 gal. pail. To prevent this you can

do the following:

The inlet and outlet of the Dust Deputy are shouldered and tapered

to adapt to a range of vac hose sizes. If on your model the friction

ﬁt isn’t as tight as needed you can do the following:

Shop

Vacuum

5 Gal.

Pail

Brick or Weight

Casters

Caster

Inhaltsverzeichnis

Andere Oneida Air Systems Staubabscheider Handbücher

Oneida Air Systems

Oneida Air Systems Dust Deputy AXD001004 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Cobra - XCK010000 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems XCKM010000 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Deputy AXD001004 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Pro 1500 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Mini GORILLA XXP010101 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems 5 & 7.5 HP Direct Drive Cyclonic Dust... Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Cobra Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Supercell XSK000035 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Cobra - XCK010000 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Cobra Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Smart Pro XXS200001 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Deputy AXD001004 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Gorilla Pro Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Dust Deputy AXD001004 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems BenchTop DC Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems XCKM013000 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Super Dust Gorilla Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems XXVM001500 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems 2 HP Commercial Cyclonic Dust Collector Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems 8491685 Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems V - 2000 2hp Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Deluxe Dust Deputy Bedienungsanleitung

Oneida Air Systems

Oneida Air Systems Mini-Gorilla Bedienungsanleitung

Beliebte Staubabscheider Handbücher anderer Marken

Fein

Fein 9-88-35 Bedienungsanleitung

Blastrac

Blastrac BDC-44 Bedienungsanleitung

DIVERSITECH

DIVERSITECH WB-4000-D Handbuch

National

National 3402 Bedienungsanleitung

Grizzly

Grizzly G0850 Bedienungsanleitung

Bosch

Bosch GDE18V-16 Montageanleitung

Grizzly

Grizzly G0441HEP Bedienungsanleitung

Storch

Storch Cover Quick Wall Bedienungsanleitung

laguna

laguna C FLUX 1 Bedienungsanleitung

GMC

GMC RDC8LA Bedienungsanleitung

Jet

Jet DC-1100VX Series Service-Handbuch

Showa

Showa Fumeresa CBA-1000AT-HC-DSA-V1 Bedienungsanleitung

King Industrial

King Industrial KC-4043KWRC Bedienungsanleitung

Jet

Jet 500 Bedienungsanleitung

Shop fox

Shop fox SHOP FOX W1687 Bedienungsanleitung

Blastrac

Blastrac 655DC Bedienungsanleitung

Elektra Beckum

Elektra Beckum Multi 180A Bedienungsanleitung

Grizzly

Grizzly G0508 Kurzanleitung