Gold's Gym PLATINUM GGBE1658.0 Bedienungsanleitung

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manu-

al for future reference.

Model No. GGBE1658.0

Serial No.

Write the serial number in the

space above for future reference.

QUESTIONS?

As a manufacturer,we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if a part is

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL-FREE:

1-877-776-4777

Mon.–Fri., 6 a.m.–6 p.m. MST

Sat. 8 a.m.-4 p.m. MST

ON THE WEB:

www.goldsgympowerflex.com

USER’S MANUAL

Serial Number Decal

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

TABLE OF CONTENTS

GOLD'S GYM is a registered trademark of Gold's Gym International, Inc. This product is manufactured and

distributed under license from Gold's Gym International, Inc.

WARNING DECAL PLACEMENT

The decals shown here have been

applied in the locations shown. If a

decal is missing or illegible, call

the telephone number on the

front cover of this manual and

order a free replacement decal.

Apply the decal in the location

shown. Note: The decals may not

be shown at actual size.

IMPORTANT PRECAUTIONS

WARNING: Toreduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on the weight bench before using the weight bench.

ICON assumes no responsibility for personal injury or property damage sustained by or through

the use of the weight bench.

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over the age of 35 or per-

sons with pre-existing health problems.

2. Use the weight bench only as described in

this manual.

3. It is the responsibility of the owner to ensure

that all users of the weight bench are ade-

quately informed of all precautions.

4. The weight bench is intended for home use

only. Do not use the weight bench in a com-

mercial, rental, or institutional setting.

Keep the weight

bench

indoors, away from

moisture and dust. Place the weight

bench

on a level surface, with a mat beneath it to

protect the floor or carpet. Make sure that

there is enough clearance around the weight

bench

to mount, dismount, and use it.

6. Keep children under age 12 and pets away

from the weight bench at all times.

Inspect and properly tighten all parts regular-

ly. Replace any worn parts immediately.

Make sure that the backrest post is fully

engaged in a slot in the frame before using the

backrest.

Wear appropriate clothes while exercising.

Always wear athletic shoes for foot protec-

tion while exercising.

10.

The weight bench is designed to support a

maximum user weight of 300 lbs. (136 kg)

and a maximum total weight of 610 lbs (277

kg). Do not place more than 310 lbs (141 kg),

including a barbell, on the weight rests. Do

not place more than 150 lbs (68 kg) on the leg

lever. Note: The weight bench does not

include a barbell or weights.

11.

If you feel pain or dizziness while exercising,

stop immediately and cool down.

Seat

Curl Pad

Leg Lever

Curl Bar

Safety Spotter

Weight Rest

Curl Pin

Weight Tube

Backrest

Adjustment Knob

Upright

Backrest Post

Storage Tube

BEFORE YOU BEGIN

Thank you for selecting the versatile GOLD’S GYM®

PLATINUM weight bench. The weight bench offers a

selection of exercise stations designed to develop the

major muscle groups of the body. Whether your goal is

to tone your body, build dramatic muscle size and

strength, or improve your cardiovascular system, the

weight bench will help you to achieve the specific

results you want.

For your benefit, read this manual carefully before

using the weight bench. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

To avoid a registration fee for any service needed

under warranty, you must register the weight bench

at www.iconservice.com/registration.

Before reading further, please review the drawing below

and familiarize yourself with the parts that are labeled.

ASSEMBLED DIMENSIONS:

Height: 5 ft. 2 in. (157 cm)

Width: 4 ft. (122 cm)

Depth: 6ft. 1 in. (185 cm)

M6 Washer (53)

M10 Nylon

Locknut (57)

M10 x 165mm Bolt (49)

M8 x 70mm Bolt (44)

M10 Washer (52)

M8 Nylon

Locknut (58)

M10 x 90mm Carriage Bolt (40)

M10 x 85mm Bolt (43)

M6 x 80mm Screw (46)

M6 x 40mm Screw (48)

M5 x 19mm

Screw (50)

M4 x 19mm

Screw (51)

M8 Washer (54)

M6 x 20mm

Screw (47)

M10 x 90mm Bolt (42)

M10 x 77mm Bolt Set (45)

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is

the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may

have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.

ASSEMBLY

Orient the Front Stabilizer (2) with the square

holes toward the floor. Attach the Front

Stabilizer to the Front Leg (4) with two M10 x

90mm Carriage Bolts (40) and two M10 Nylon

Locknuts (57). Do not tighten the Nylon

Locknuts yet.

Square

Holes

Before beginning assembly,make sure

that you have read and understand the

information in the box above. See the

PART IDENTIFICATION CHART on page 5

for help identifying small parts.

Before beginning assembly, carefully read the fol-

lowing information and instructions:

• To hire an authorized service technician to

assemble the weight bench, call 1-800-445-2480.

• Assembly requires two persons.

• Because of its size, the weight bench should be

assembled in the location where it will be used.

Make sure that there is enough clearance to walk

around the weight bench as you assemble it.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

•Tighten all parts as you assemble them, unless

instructed to do otherwise.

• As you assemble the weight bench, make sure all

parts are oriented as shown in the drawings.

• For help identifying small parts, use the PART

IDENTIFICATION CHART on page 5.

• Assembly requires the included hex key(s)

and the following tools (not included):

two adjustable wrenches

one rubber mallet

one standard screwdriver

one Phillips screwdriver

Assembly may be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Make Assembly Easier

Everything in this manual is designed to ensure

that the weight bench can be assembled suc-

cessfully by almost anyone. By setting aside

plenty of time, assembly will go smoothly.

2. Attach the Rear Stabilizer (3) to the Frame (1)

with two M10 x 90mm Carriage Bolts (40) and

two M10 Nylon Locknuts (57). Donot tighten

the Nylon Locknuts yet.

3. Attach the Seat (18) and the Seat Bracket (8) to

the Frame (1) with two M6 x 80mm Screws (46)

and two M6 Washers (53).

4. Attach the Frame (1) to the Front Leg (4) with

two M10 x 85mm Bolts (43), two M10 Washers

(52), and an M10 Nylon Locknut (57). Do not

tighten the Nylon Locknut yet.

Finish attaching the Front Leg (4) to the Frame

(1) with four M4 x 19mm Screws (51).

See steps 1, 2, and 4. Tighten the M10 Nylon

Locknuts (57).

5. Apply a portion of the included grease to an

M10 x 165mm Bolt (49). Attach the Backrest

Post (15) to the Backrest Frames (16) with the

Bolt, two M10 Washers (52), and an M10 Nylon

Locknut (57). Donot tighten the Nylon

Locknut yet.

Attach the Backrest (19) to the Backrest

Frames (16) with four M6 x 40mm Screws (48)

and four M6 Washers (53). Do not tighten the

Screws yet.

6. Grease an M10 x 165mm Bolt (49). Attach the

Backrest Frames (16) to the Frame (1) with the

Bolt, two M10 Washers (52), and an M10 Nylon

Locknut (57). Set the end of the Backrest Post

(15) in one of the slots in the Frame. Do not

overtighten the Nylon Locknut; the Backrest

Frames must pivot easily.

See step 5. Tighten the M10 Nylon Locknut

(57) and the four M6 x 40mm Screws (48).

Do not overtighten the Nylon Locknut; the

Backrest Post (15) must pivot easily.

7. Attach the Weight Tube (24) to the Leg Lever

(5) with an M8 x 70mm Bolt (44), a 13mm x

16mm Spacer (55), two M8 Washers (54), and

an M8 Nylon Locknut (58). Next, press a 25mm

Outer Cap (56) onto the end of the Weight

Tube.

Apply grease to the barrel of an M10 x 77mm

Bolt Set (45). Attach the Leg Lever (5) to the

Front Leg (4) with the Bolt Set. Make sure that

the barrel of the Bolt Set is inserted through

both sides of the bracket on the Front Leg.

52 15

Slot

Grease

Bracket

58 54

Grease

Wide End

8. Insert the Long Pad Tube (36) into the bracket

on the Front Leg (4). Slide two Foam Pads (22)

onto the Long Pad Tube, and press a Pad Cap

(23) into each Foam Pad.

Repeat this step with the two Short Pad

Tubes (21).

9. Attach the Bumper (30) to the Curl Bar (17)

with an M4 x 19mm Screw (51).

Attach the Curl Bar (17) to the Leg Lever (5)

with the Curl Bar Pin (33). Then, attach the

Tether (34) on the Curl Bar Pin to the Leg Lever

with an M4 x 19mm Screw (51).

10. Attach the Curl Pad (20) to the Curl Post (6)

with two M6 x 20mm Screws (47).

21Bracket

11. Identify the Left Upright Base (39), which is

marked with an L sticker. Attach a Foot (39) to

the Left Upright Base with an M5 x 19mm Screw

(50). Insert an M10 x 90mm Carriage Bolt (40) up

into the Left Upright Base. Note: It may be help-

ful to place a piece of tape over the bolt head

to hold it in place.

Attach the Left Upright Base (9) to the Base (7)

with two M10 x 90mm Carriage Bolts (40), an

M10 x 90mm Bolt (42), four M10 Washers (52),

and three M10 Nylon Locknuts (57). Do not

tighten the Nylon Locknuts yet.

Repeat this step for the Right Upright Base

(10).

12. Attach a Storage Tube (14) to an Upright (11)

with two M10 x 90mm Bolts (42), two M10

Washers (52), and two M10 Nylon Locknuts

(57).

Attach the Upright (11) to the Left Upright Base

(9) with the M10 x 90mm Carriage Bolt (40),

four M5 x 19mm Screws (50), and an M10

Nylon Locknut (57).

Repeat this step for the other Upright (11)

and the Right Upright Base (10).

See step 11. Tighten all of the M10 Nylon

Locknuts (57).

13. Set a Safety Spotter (13) on a set of pegs on

the left Upright (11).

Set the other Safety Spotter (13) on a set of

pegs on the right Upright (11). Make sure that

both Safety Spotters are at the same height.

14. Make sure that all parts are properly tight-

ened before you use the weight bench. The

use of all remaining parts will be explained

in ADJUSTMENT on pages 11and 12.

Pegs

Inhaltsverzeichnis

Andere Gold's Gym Fitnessgeräte Handbücher

Gold's Gym

Gold's Gym GACR02 Bedienungsanleitung

Gold's Gym

Gold's Gym CYCLE TRAINER 400 R Bedienungsanleitung

Gold's Gym

Gold's Gym Pro Series Bedienungsanleitung

Gold's Gym

Gold's Gym GGBE59740 Bedienungsanleitung

Gold's Gym

Gold's Gym GGSY04510.1 Bedienungsanleitung

Gold's Gym

Gold's Gym Interactive 890 Bedienungsanleitung

Gold's Gym

Gold's Gym GGBE19615.0 Bedienungsanleitung

Gold's Gym

Gold's Gym XR 6.1 CURL PAD Bedienungsanleitung

Gold's Gym

Gold's Gym VIBEMAX 580 Bedienungsanleitung

Gold's Gym

Gold's Gym WGGRKOS06 Bedienungsanleitung

Gold's Gym

Gold's Gym 15 - 0127GG Bedienungsanleitung

Gold's Gym

Gold's Gym Stride Trainer 350 Bedienungsanleitung

Gold's Gym

Gold's Gym GGBE29922 Bedienungsanleitung

Gold's Gym

Gold's Gym CYCLE TRAINER 400 R Bedienungsanleitung

Gold's Gym

Gold's Gym GGBE1486.0 Bedienungsanleitung

Gold's Gym

Gold's Gym GGBE1657.0 Bedienungsanleitung

Gold's Gym

Gold's Gym VIBEMAX 580 Bedienungsanleitung

Gold's Gym

Gold's Gym GGBE1067.0 Bedienungsanleitung

Gold's Gym

Gold's Gym GGSY24618.0 Bedienungsanleitung

Gold's Gym

Gold's Gym POWER FLEX Bedienungsanleitung

Gold's Gym

Gold's Gym XR25 GGBE24320 Bedienungsanleitung

Gold's Gym

Gold's Gym GB 2000 Bedienungsanleitung

Gold's Gym

Gold's Gym Platinum GGBE0957.0 Bedienungsanleitung

Gold's Gym

Gold's Gym XR 8.1 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung